片语

nodular graphite cast iron crankshaft球铁曲轴

spheroidal graphite cast iron[材] 球墨铸铁

nodular r cast iron球墨铸铁

nodular cast iron GS51球墨铸铁GS

ductile cast iron[材] 球墨铸铁

nodular iron[材] 球墨铸铁

heat-resisting nodular melleable cast iron耐热球墨可锻铸铁

heat-resisting nodular malleable cast iron耐热球墨可锻铸铁

RE nodular cast iron稀土球墨铸铁

nodular melleable cast iron球墨可锻铸铁

nodular cast iron crankshaft铸态球铁曲轴

英汉例句

• the forming mechanism of pinhole defect in no-solvent polyurethane coat on centrifugal nodular cast iron pipe is analyzed, some effective measures to eliminate offered.

  分析了离心球铁管无溶剂聚氨酯涂层针孔缺陷形成的机理，给出了消除这一缺陷的有效措施。

• this paper has discussed the wearability of groy cast iron and nodular cast iron and provided several surface treating methods for increasing their wear-resistance.

  本文借助实验，探讨了铸铁、球墨铸铁的磨损特性，同时指出了几种提高其耐磨性的表面处理方法。

• the paper reported the development and fine property of the nodular cast iron pipe used in gas pipeline, as well forecasted its market prospect.

  为了提高水冷型离心机球墨铸铁管的成形率，降低废品率，对球墨铸铁管气孔、针孔产生的原因进行了分析，并提出了一些预防措施。

• the roller sheaths made of nodular cast iron instead of alloy die steel was discussed from choosing material and heat treatment, and it has been applied in production.

  从选材和热处理角度论述了以球墨铸铁代替合金模具钢制造轧球机轧辊套，对以低成本材料代替高成本材料进行了有益的探索，并应用于实际生。

• the direct bonding joint between cemented carbide and nodular cast iron and the indirect bonding joint by using nickel foil as intermediate layer were obtained by hip diffusion bonding process.

  用热等静压扩散连接法获得了硬质合金与球墨铸铁的直接连接接头和以镍箔为中间夹层的间接连接接头。

• according to the requirements of automobile exhaust pipes on material and its properties, a high strength and toughness nodular cast iron of thin section castings has been developed.

  针对汽车发动机排气管材质及性能要求，研制了一种薄壁高强韧铸态球墨铸铁排气管，确定了其化学成分和铸造工艺。

• the results show that martensite nodular cast iron has best wear resistance with static load;

  结果表明，在静载条件下，马氏体球铁耐磨性最好；

• main points in design and construction concerning the large diameter nodular cast iron pipeline are described by means of taiyuan water supply engineering from the huanghe river.

  介绍了大口径球墨铸铁管的主要性能特点，并通过黄河水源太原市城市给水工程，就大口径球墨铸铁管在设计与施工中的要点进行了论。

• experiments indicates that the harrow piece of nodular cast iron in squeezing casting has the features of excellent mechanical properties and low production cost.

  经试验，挤压铸造的球墨铸铁耙片力学性能好，生产成本低。

• it is suitable for the grinding of ball-bearings, stainless steel and special nodular cast iron as well as forming grinding, infeeding grinding and other precision grinding, etc.

  适用于轴承钢、不锈钢和特种球墨铸铁等的磨削。用于成型磨、切入磨和其他精密磨削。

• because the nodular cast iron production cost is lower than the cast steel, the mechanical property compared to cast irons generally well, therefore present obtained the widespread application.

  由于球铁生产成本比铸钢低 ，机械性能比一般铸铁好，因此目前已得到广泛应用。

• the mechanical properties of nodular cast iron can be further improved by isothermal quenching.

  处理可进一步提高球墨铸铁的机械性能。

• the basic types of graphite morphology in nodular cast iron is introduced.

  提出一种包内快速预测铁水石墨形态的新方法及新装置。

• this paper deals with the mechanism of forming the dross defect, which is shown after nitriding in the nodular cast iron crankshaft of the diesel locomotive, and its methods of prevention.

  本文研究内燃机车球墨铸铁曲轴中夹渣缺陷的形成机理及防止的方法。通过对曲轴中夹渣组成的分析，确定该缺陷主要是在低压铸造过程中所形成的氧化夹渣。

• this type of tips has presented a good wear resistance equal to that of typical cemented carbides yg6 tips when cutting austenitic stainless steel, nodular cast iron and chilled cast iron.

  结果表明，该刀片在车削奥氏体不锈钢、球磨铸铁和冷硬铸铁时，其耐磨性较好，与常规工艺生产的yg6刀片相当。

• defects of crankshaft surface and body will produce important effect on engine reliability. this paper probes into flaw detection technology of forging steel and nodular cast iron of crankshaft.

  曲轴表面及本体的缺陷，对发动机的可靠性有重要影响，对锻钢和球墨铸铁曲轴的探伤技术进行探讨。

• for repair welding of the working side and non-working side of high-strength cast iron and nodular cast iron .

  用于球墨铸铁、高强度铸铁件加工面和非加工面的补焊。

• the company products mainly rely on nodular cast iron and alloy casting iron.

  公司产品主要以球墨铸铁及合金铸铁为主。

• from inner to outside, the composite pipe consisted of alumina ceramic layer, metal transition layer, white cast layer, carbon atom diffusion layer and nodular cast iron layer.

  复合管从里到外由氧化铝陶瓷层、金属过渡层、白口铸铁层、碳原子扩散层、球墨铸铁层组成。

• the practice also proved that the nodular cast iron is one good anti-friction material, its wear-resisting performance surpasses the gray iron and the carbon structural steel.

  实践还证明球铁是一种良好的耐磨材料，其耐磨性能优于灰铸铁和碳素结构钢。

• under the environment of about 1 000 ℃, have got comparatively extensive use on the industry furnace at home and abroad of nodular cast iron with good heat-resisting performance.

  其中，铝硅系列的耐热球铁由于其不仅具有优良的抗氧化与抗生长能力，而且还具有一定的力学性能和较好的铸造性能，是一种较受用户欢迎价格适中的材料1。

• you can select casting iron , nodular cast iron , casting steel , forged steel , stainless steel , high-temperature steel , alloy steel , etc. for use according to your needs.

  根据不同需要，材质可选用铸铁、球墨铸铁、铸钢、锻钢、不锈钢、高温钢、合金钢等。