片语

best reaction temperature最佳反应温度

Reaction feeding temperature反应进料温度

reaction bed temperature催化剂床层温度

reduce reaction temperature降低反应的温度

eutectic reaction temperature共晶转变温度

optimal reaction temperature最佳反应温度

reaction starting temperature开始反应温度

reaction start temperature反应起始温度

reaction zone temperature反应区温度

英汉例句

• Discussed the influence to the retention rate by the dosage of coupling agents, the reaction time, the reaction temperature in modification.

  讨论了轻质碳酸钙改性过程中偶联剂用量、反应时间、反应温度等因素对留着率的影响。

• The methane conversion increased and formaldehyde selectivity decreased and formaldehyde specific activity increased as the reaction temperature rising.

  随着反应温度的升高，甲烷的转化率增加，甲醛的选择性降低，甲醛比活性升高。

• The emulsion polymerization also was influenced by the dosage of emulsifier and initiator, reaction temperature and reaction time and agitating speed.

  乳化剂、引发剂用量及反应温度、反应时间和搅拌速度对乳液聚合反应有重要影响。

• The effects of concentrations of aniline, oxidizing agent, doping agent, and the reaction temperature and period on the conductivity of the composite fiber were discussed.

  讨论了氧化剂与苯胺的初始摩尔比、苯胺单体浓度、掺杂酸浓度、反应温度及反应时间对纤维导电性能的影响。

• The effects of monomer concentration, initiator, reaction temperature and time on copolymerization were studied.

  考察了单体浓度，引发剂浓度，反应温度和时间等对共聚反应的影响。

• The effect of acid-alcohol ratio, acidity of catalyst, amount of catalyst, reaction time, and reaction temperature were investigated.

  考察了醇酸比，催化剂酸度，催化剂用量，反应时间，反应温度对酯化产率的影响。

• The factors which affect the reaction, such as reaction temperature and raw material ratio, have been discussed.

  有关反应温度、原材料配比等因素对反应的影响都进行了详尽的研究。

• The reaction conditions such as dosages of catalyst, 1, 4 dioxane and water, solvent type, reaction temperature and time, adding method were also studied.

  同时还研究了催化剂用量、1,4二氧六环的用量、溶剂种类、反应温度、反应时间、水量及加水方式等对该反应的影响。

• The product distribution could be improved by using higher reaction temperature to improve atomization and gasification of feedstock.

  增大剂油比，提高反应温度可以改善原料油的雾化、汽化效果，对改善裂化产物的产品分布有利。

• The effect of phase reaction temperature of salt roasting and other factors on vanadium recovery is investigated.

  研究了氯化钠焙烧中相反应温度及其它与钒转化浸出率的有关因素。

• The influences of medium alkalinity, solvents, reaction temperature and reaction time on the yield of the product were investigated.

  讨论了介质堿性、溶剂、反应温度和反应时间等工艺条件对产物收率的影响。

• The proper reaction temperature and time are determined in the experiment.

  通过试验，确定了合适的反应温度和反应时间。

• The dominant reaction pathways and the effect of reaction temperature and type of zeolites on the yield and selectivity of benzene formed during catalytic cracking of cumene were investigated.

  在催化裂化反应条件下，研究了异丙苯主要裂化反应路径以及反应过程中反应温度和分子筛类型对苯产率和选择性的影响规律。

• The influence of reaction temperature and reaction time on degree of esterification were investigated.

  通过正交实验考察了反应时间、反应温度对聚乙烯醇酯化程度的影响。

• A comparative study showed that the yield was low when the reaction temperature was too low or too high.

  反应温度过高或过低，碳纳米管的产率都很低。

• The influences of concentration of BPO, concentration of monomer, reaction time, reaction temperature were investigated in terms of grafting degree and gel content.

  研究了单体浓度、引发剂浓度、反应时间和反应温度对接枝聚合物接枝率、凝胶率等的影响。