英语释义

1. to crystallize again or repeatedly
In a second step, GE's long-established high-pressure technology … was used to dissolve and recrystallize a cluster [of tiny diamonds] into a single gem.
— Lapidary Journal … the meteorite does show hints in some places of having melted and recrystallized, which could indicate more about the conditions under which it was knocked off from its parent body.
— Alexandra Witze

2. to crystallize again or repeatedly

片语

strain recrystallization应变重结晶作用

recrystallization welding再结晶焊接

pretectonic recrystallization构造变形前再结晶

recrystallization temperature[机] 再结晶温度

recrystallization centre再结晶中心

degrading recrystallization退变重结晶作用

recrystallization annealing[机] 再结晶退火

recrystallization SiC重结晶SiC

Recrystallization Kinetics再结晶动力学

perfect recrystallization完全再结晶

vacuum recrystallization真空精馏

英汉例句

• recrystallization takes patience, but it's worth it!

  再结晶须有耐心，但它是值得的！

• the results showed that the austenite recrystallization occurs in a temperature range biger than thenormal quenching temperature and there is an optimum temperature range for the grain refining.

  结果表明，奥氏体的再结晶发生在钢的正常淬火温度以上的一个温度范围，并在该范围内存在晶粒细化效果最佳的温度区域；

• the lower the recrystallization temperature, the smaller is the grain size.

  变形量越大，则再结晶温度越低，晶粒尺寸越小；

• the recrystallization of the fibre will restore the desired shape.

  纤维的再结晶可将所需要形状固定下来。

• it is reveal by gc analysis that the purity of the tmp , treated by reduced pressure distillation and recrystallization in acetic ester , approximates to that of the reagent grade tmp .

  gc分析结果表明：采用减压蒸馏及乙酸乙酯重结晶并用的方法精制的tmp纯度接近于试剂级tmp。

• the metal can be forged hot (above recrystallization temperatures) or cold.

  金属既可热锻（高于再结晶温度）也可冷锻。

• it is shown that dynamic recrystallization of ferrite can occur in low carbon microalloyed steels.

  试验结果表明，低碳微合金钢能够发生铁素体动态再结晶。

• experimental results indicate that the sample undergoes a process of continuous melting and recrystallization during dsc scanning.

  实验结果表明，在dsc扫描过程中试样经历了连续熔化与再结晶的过程。

• methods: alcoholic extraction, silica gel, ods column chromatography and recrystallization were used.

  方法： 采用工业酒精提取、胶柱层析、ds柱层析和重结晶等方法。

• at the same velocity, the dynamic recrystallization phenomenon is rather distinct with the rise of temperature.

  在相同的速度下，随着温度的升高，动态再结晶现象比较明显。

• dynamic recovery and local recrystallization is the main softening mechanism.

  动态回复和局部再结晶是主要的软化机制。

• the secondary recrystallization and its temperature range of grain oriented silicon steel have been studied by the method of interrupting secondary recrystallization annealing.

  采用＂中断法＂研究了取向硅钢二次再结晶过程中的异常长大行为，确定了二次再结晶发生的温度范围。

• the effect of damage and fault healing has the great influence on the plasticity in materials over the recrystallization temperature.

  再结晶温度以上，材料内部缺陷损伤与修复的作用效果对塑性变形能力具有重要影响。

• the major deformation mechanisms were found to be dislocation glide, grain breaking, and geometric dynamic recrystallization (gdrx).

  合金的变形机制主要是位错滑移，晶粒碎化和几何动态再结晶机制。

• these phenomena have already been mentioned above, the paper explained using dynamic recovery, dynamic recrystallization and vacancy theory.

  根据上述诸现象，文章用动态回复再结晶理论、空洞理论等进行了解释。

• the results showed that the dynamical recrystallization can fine grain.

  结果表明，通过动态再结晶能获得细小的晶粒。

• the effect of beryllium on the recrystallization dynamics and aging properties of aluminum alloy 7475 was studied in response to various heat treatment conditions.

  通过对工业生产的7475铝合金加入不同含量的铍，研究了铍对合金的再结晶动力学及时效行为的影响。

• the recrystallization temperature of cold deformed steels and its influencing factors have been studied by measuring hardness values and structure observation.

  通过测量硬度和观察组织，确定了几种冷变形钢的再结晶温度及其影响因素。

• the effect of uneven distribution of strain during compression on dynamic recrystallization and grain size of austenite was analyzed.

  分析了热模拟变形过程中的非均匀应变对奥氏体动态再结晶及晶粒尺寸的影响。

• the recrystallization textures after different annealing processes of 3104 aluminium alloy had been investigated by means of orientation distribution functions(odfs) .

  应用取向分布函数（odf）研究和分析了3104铝合金经不同工艺退火后的再结晶织构。

• recrystallization and grain growth process is one of the most important physical metallurgical processes to produce metal materials.

  再结晶和晶粒长大过程是制作金属材料最重要的物理冶金过程之一。

• the coarse crystalline lc4 alloy exhibit some superplasticity under lower temperature and higher strain rate, because it can create effective recrystallization refinement.

  粗晶lc4合金在较低温度和较高应变速率条件下，因能产生有效的再结晶细化，而呈现出一定的超塑性。

• results show that: powder metallurgical molybdenum shows obvious characteristics of dynamic recovery and recrystallization in the high temperature deformation.

  研究结果表明：粉冶钼在高温变形时明显表现出动态回复与再结晶特征；