片语

roll-gap measuring辊缝测量

inner roll-gap closed-loop control内辊缝闭环控制

roll gap setter辊缝调整器

roll-gap setting调整压下装置

open roll gap开口辊缝

roll-gap position辊缝位置

roll gap control辊缝控制

roll gap indicator辊缝指示器

英汉例句

• On the theoretical basis, the compressing roll gap was increased and buckling was reduced.

  在理论分析的基础上，提高了压紧辊的间隙，减少了失稳弯曲。

• The rate of nomal fracture is keeped about 97% by optimizing roll gap shrinkage and strengthening management of second cooling and Fan-paragraph, according to now level of casting machine.

  并根据连铸机现状水平，采取优化辊缝收缩方案、加强二冷系统和扇形段的管理，使得高强船板断口合格率稳定在97%左右。

• In the event of a stall, immediately open the roll gap and turn off the cooling water.

  在轧机发生事故时，应快速打开轧辊间隔，关掉冷却水，去掉辊身上卷曲的带钢。

• Plastic deformation is easy to occur on the surfaces of plate and strip in the roll gap of pinch mill.

  在板带递送机辊缝变形区中，板带表面容易发生塑性变形。

• The influence of work roll′s bending force on roll′s bending deformation, roll gap geometry and exit thickness is investigated under the conditions of different width and thickness of sheet.

  研究了不同宽度和厚度下工作辊弯辊力对辊系变形、辊缝形状及轧件出口厚度的影响规律。

• Not all rolling incidents such as stickers or stalls and wrong setting of the roll gap must necessarily lead to severe damage.

  事故的发生，如粘接、卡带或辊缝间隙设计不当不一定都会引发轧辊的损坏，事故之后对轧辊正确处理非常重要。

• The inter-stand tension can be changed by adjusting the roll gap or the roll speed.

  利用动态连轧理论分析了辊速和辊缝对出口厚度和张力的影响。

• Hydraulic gap control system is the key part of accuracy for stripe gauge control of tandem cold rolling mill. Hydraulic screw down system is the most important part of hydraulic roll gap control.

  液压辊缝控制系统是冷连轧机组控制带钢厚度精度的关键环节，液压压下系统是液压辊缝控制的最重要的组成部分。

• This paper introduces the controlling method to do roll gap regulation used of ABB MASTER system on medium small section mill of Laiwu iron and steel group co.

  介绍了莱钢中小型轧钢车间轧机采用ABBMASTER系统进行辊缝调整的控制方法。

• The influence of the roll gap change and roll speed change on the exit thickness and the inter-stand tension is computed with the dynamic continuous rolling theory.

  研究结果表明：对于四道次轧制的情况，辊速和辊缝在正向轧制时对出口厚度的影响大于逆向轧制时的影响；

• Application of roll gap lubrication in CSP production was analyzed from hot rolling lubrication mechanism and practical technology.

  从热轧润滑机理和现场技术改进等方面，分析了辊缝润滑在CSP生产线上的应用情况。

• This paper introduces the operation principle of the author developed equipment for measuring roll gap and ellipticity of the guide roller in continuous caster.

  文中介绍了作者研制的连铸导辊辊缝和椭圆度测量装置的工作原理及测头结构。

• Chief parameters of aided reel roll includes tight pressure, send entrance force, roll gap and distributed position, determination of that is great importance to design and control for down coilers.

  助卷辊主要参数包括压紧力、送进力、辊缝值和分布位置的确定，对地下卷取机的设计和控制具有十分重要的意义。

• The differential equations of continuous rolling tension and roll gap are the essential conditions. This comprehensive and integrated -rolling model comb…

  连轧张力差分方程和辊缝差分方程是实现分离控制的必要条件，综合集成轧钢模型将人工智能和数学模型融于一体。