片语

factor of rotary inertia[机]

rotational inertia[力] 转动惯量；转动惯性；惯性矩

inertia rotary惯性式

shearing dformations and rotary inertia剪切效应和转动惯性

shear and rotary inertia剪切和转动惯量

rotary y inertia转动惯量

moment of inertia[力] 惯性矩，转动惯量

coefficient of rotary inertia转动惯量系数

Rotary Inertia and Servo Motor惯量与伺服电动机

shear effect and rotary inertia横向剪切和转动惯量效应

Tuned Rotary Inertia Damper的调谐转动惯量阻尼器

英汉例句

• this paper introduces the principle and plan of the measuring systems of rotary inertia in the comyucters and also points out the methods on how to improve the quality of the experimental reaching.

  本文介绍了微机刚体转动惯量测定系统的原理及实现方案，并指出在现有实验设备的基础上提高实验教学质量的方法和途径。

• the high natural frequencies of symmetrical section beam with different constraints are calculated in detail, and effects of rotary inertia and shearing deformation are given.

  计算了对称截面粱在不同边界条件下的高阶固有频率，讨论了转动惯量及剪切变形效应对各阶固有频率的影响。

• based on the principle of compound pendulum, the measurement method and corresponding equipment for the centroidal deviation and the rotary inertia of rocket projectile were described.

  基于复摆原理，阐述了箭弹的质偏和转动惯量的测量方法及装置，推导出了质偏和转动惯量的计算公式。

• the main advantages are the transverse shear deformation and rotary inertia are considered naturally, and there is no restriction on the thickness of plate and height of stiffener.

  主要优越性表现为：结构的旋转惯性、剪切变形等都得到了考虑，且不限制结构的板厚度和加强筋的高度。

• nonlinear dynamic governing equations of piezoelectric laminated cylindrical shell which considered the effect of piezoelectricity and rotary inertia was derived from hamiltons principle.

  研究了考虑转动惯量和大变形效应的复合材料压电层合壳内的波传播规律。

• the natural frequencies of the intelligent beam with the rotary inertia and shear deformation of the beam are lower than that without those.

  考虑梁的转动惯量和剪切变形时，智能阶梯梁的频率比没有考虑时的要低。

• the result also denotes rotary inertia and the shear formation of the beam have significant effect on the high frequencies.

  考虑梁的剪切变形和转动惯量时，对梁的高阶频率影响较大。

• it is also shown that the influence of the rotary inertia of the mass block on the shear failure is not negligible.

  质量块的转动惯量对于剪切失效具有不可忽略的影响。

• the effect of shear deformation and rotary inertia are considered in the paper.

  文中考虑了剪切变形和转动惯量的影响。

• according to the conveyance mechanism of pipe belt conveyor, the paper analyzed the equivalent rotary inertia of pipe belt conveyor, which has certain sense for setting the soft start device.

  围绕圆管带式输送机的输送机理，分析了圆管带式输送机的等效转动惯量，对于软起动装置的设定有一定意义。

• the effects of bending-torsion coupling, warping stiffness, shear deformation and rotary inertia are taken into account in the present formulations.

  在本文研究中考虑了弯扭耦合、翘曲刚度、转动惯量和剪切变形的影响。

• the rotary inertia of an ellipsoid rotating around the symmetry axis is calculated by use of the divided calculation and the extensive spherical coordinate transformation.

  用分步计算和广义球面坐标变换两种方法对椭球体绕对称轴旋转的转动惯量进行了计算，计算表明，后一种方法简单、实用，在工程实际中有应用价值。

• to study the influence of rotary inertia on gear flowmeter natural frequency, keep damping and leakage coefficient as constant.

  结果表明：与增大泄漏系数、阻尼系数相比，减小转动惯量可以明显的提高流量计的频率响应。

• the result also denotes the shearing deformation and rotary inertia of the beam have significant effect on the high frequency.

  当考虑梁的剪切变形和转动惯量时，则对梁的高阶频率影响较大。

• notes:weight and rotary inertia are approximate value calculated by the greatest shaft-hole dia. of y type hole.

  注：重量、转动惯量是按最大轴孔直径y型孔计算的近似值。

• in this optimizing algorithm, the rotary inertia of the frame is taken as the objective function, while its structural dimensions and minimum natural frequencies are used as the constraint functions.

  优化的目标函数为框架转动惯量，约束函数为框架的部分结构参数和最低固有频率。