a hand tool with a heatable tip; used to melt and apply solder

open the ld short lands quickly with a soldering iron after a circuit is connected.

短路焊接，在接通回路时，请快速使用焊锡。

soldering iron used imported heater and tips for longer life.

烙铁采用进口发热芯及烙铁咀，寿命更长。

the litz that i have can be easily tinned by using a hot soldering iron and solder.

用电烙铁和焊锡可以很容易的给李兹线上锡。

do not place a soldering iron near or on the body of the capacitor to avoid the sleeves of the capacitors deforming and cracking under high temperature.

使用电烙铁焊锡时，电烙铁请勿靠近或接触电容器本体，以免因高温而使电容器之塑胶套管变形或破裂。

soldering iron should be kept in a suitable distance from vinyl sleeve of capacitor in order to avoid sleeve crack.

电烙铁应与电容器塑胶套管保持适当距离，以防止过热造成塑胶套管破裂。

the japanese use a hot piece of iron like an old-fashioned soldering iron to burn away the fluffy material from inside the quill.

日本人使用一片类似于老式烙铁的热铁片将羽茎内部的松软物质烧掉。

such thought in the oriental philosophy is also expressed in his soldering iron works.

这种东方哲思，在吴永平焊铁作品中也得到生动的表达。

heat up your soldering iron and tin it by allowing it to melt a drop of solder onto its tip.

加热你的电烙铁，通过允许其热量融化的一滴锡滴在它的尖端来锡化它。

so far, soldering iron tips have been made mainly of copper, and in order to prevent oxidization, the copper has been either iron-plated or chromlum-plated.

到目前为止，普通烙铁的焊嘴主要还是是铜，为了防止氧化，铜已经被处理加装铁皮或电镀。

the second technique involved using braided solder wick and a soldering iron with a blade tip to remove residual solder from the pcb pad.

第二个技术工艺涉及到使用网状焊料芯吸法及有刀片尖的焊接烙铁来除去pcb焊盘上的残余焊料。

new vacuum gun and antistatic soldering iron dual function.

真空吸锡枪及防静电烙铁的全新双功能组合。

antistatic soldering iron and hot air desoldering 2 in 1 design to save the cost.

防静电烙铁及热风拆焊的全新二合一设计，节省成本…

the design of absorb tin gun and soldering iron is lightweight, suitable for prolonged use.

吸锡枪及焊铁设计轻巧，适合长时间使用。

vacuum gun and 24v soldering iron have good protection of pcb by antistatic design.

吸锡枪及24v烙铁为防静电设计，有效保护线路板。

the head center of the soldering iron head is provided with a centering pin positioned at the center point of the circular ring circle and rising a little altitude than the circular ring plane.

在所述烙铁头的头部中心有一定心针，该定心针位于圆环的圆心处，高度略微高出圆环平面。