片语

energy saving solution-treatment节能固溶处理

solution heat treatment solution measurements溶液测定

solution annealing固溶退火；溶解退火；溶体化退火

solid solution heat treatment固溶热处理

aging with solution heat treatment固溶时效

solution heat treatment solution measurementss溶液测定

Sole Solution Foot Treatment足部修护霜

solution heat treatment[机] 固溶热处理；固溶退火；均匀化

solution n treatment固溶化热处理

solution heat treatment procedure固溶处理工艺

英汉例句

• solution treatment parameters have great influences on the microstructure and mechanical properties of rheology die casting.

  固溶处理工艺参数对流变压铸零件组织和性能有较大的影响。

• and solution treatment is the valid method to improve the anticorrosion property of the austenite stainless steel bellows.

  固溶处理是改善和提高奥氏体不锈钢波纹管抗应力腐蚀能力的有效措施。

• the results show that integrated properties of re y-c194 alloy under the low temperature solution treatment can achieve or surpass the ones of c194 alloy under the high temperature solution treatment.

  结果表明，稀土y-c194在低固溶处理条件下，综合性能可达到甚至优于高固溶处理条件的c194合金的性能。

• by proper solution treatment the grain size of alloys was moderate, thus a good combination of strength, plasticity and the resistance to thermal fatigue was obtained.

  采用适当固溶温度处理，该二合金晶粒度适中，可获得强度、塑性和抗热疲劳性能较好的配合。

• the effect of solid solution treatment and aging tempers on the microstructure and mechanical properties of 2195 alloy is investigated in the paper.

  研究了固溶与时效处理制度对2195合金性能和组织的影响。

• the high temperature near-solvus pre-precipitation following higher temperature solution treatment were performed on lc52 and quansi 7039 aluminum alloy.

  研究了高温固溶后降温处理工艺对中强可使预析出lc52和7039铝合金的组织、时效硬化和应力腐蚀的影响。

• the influence of different solid solution treatment on the structure and corrosion resistant property of cast duplex stainless steel was investigated.

  研究了不同固溶处理对双相铸造不锈钢的组织及其耐蚀性能的影响。

• after solid solution treatment under various temperature, the amount, size, morphology and distribution of precipitated particles are different after long time aging at 750℃.

  不同固溶温度处理后，在750℃长时时效后的层状析出量、析出大小、形态、分布也不同。

• the effect in chinese medicinal material impact solution treatment group and combination group was superior to that in physiotherapy group (p0.05).

  中药沖击松解疗法组优良率与中药沖击松解疗法联合理疗组比较差异无统计学意义（p>0.05）。

• in addition, a empirical solution treatment technology formula is concluded by theoretical diffusion analysis and microscopical study.

  应用扩散理论及微观组织分析推导出一个半经验性的固溶工艺公式。

• it includes the effect of manganese content, solution treatment temperature and cooling rate on the non equilibrium segregation of manganese and condition of segregation formation.

  研究了锰的质量分数、固溶处理温度和淬火冷却速度对锰不平衡偏聚的影响和不形成锰偏聚的条件。

• flow injection technique is a solution treatment technique under nonhomogeneous and unbalanced condition and has gained wide application in food analysis .

  流动注射是一种非均匀非平衡状态下的溶液处理技术，在食品分析领域中的应用日益广泛。

• intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure casting.

  通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。

• solution treatment is helpful to meliorate the electrochemical property and to improve the electrochemical stability of the cold worked material in corrodent medium.

  这对改善冷加工成形后材料的电化学性能，提高材料在腐蚀介质中的稳定性是有益的。

• hard anodizing film could be obtained on al-cu alloy surface which had been treated with solid solution treatment and natural aging.

  经固溶处理和自然时效的铝铜合金可以进行硬质阳极氧化。

• the influence of solution treatment time at 535 ℃ on the refining and spheroidizing of eutectic silicon of sr-modified a356 alloy made of electrolysis aluminum was studied.

  以电解低钛铝基合金为原料制备了a356合金，研究了在535℃下固溶处理时间对合金共晶硅相细化、球化和分布的影响。

• the results showed that calcium solution treatment significantly increased total calcium content in fruits, improved fruit firmness and maintained permeability of cell membrane significantly.

  结果表明：浸钙处理的果实总钙含量显着提高，其硬度明显高于对照，且有利于细胞膜透性的保持；

• the effect of high temperature solution treatment on the structure and properties of a directionally solidified high strength nickel-base superalloy has been investigated.

  本文研究高温固溶处理对一种定向凝固高强度镍基高温合金的组织和性能的影响。

• effects of master alloy of quasicrystal containing magnesium additions and solution treatment on microstructure and mechanical properties of az91 magnesium alloy were studied.

  研究了镁基準晶中间合金和固溶处理工艺对az91合金显微组织和力学性能的影响。

• it is important to control the forging temperature and solution treatment temperature lower rather than higher.

  重要的是较低的锻造温度和热处理固溶温度比较高的好得多。

• the experimental results show that, under solution treatment condition, this alloy has lower cold-crack susceptibility.

  结果表明，固溶处理状态下母材氩弧焊时具有较低的冷裂纹敏感性。

• grain growth exponent increases with the increasing of solid solution treatment temperature.

  晶粒生长指数随固溶温度的升高而增加。