片语

Work roll barrel工作辊身

Work Roll Opening开口装置

work-roll thrust bearing工作辊止推轴承

work-roll chock轧辊轴承座

automatic work roll changing工作辊自动换辊

work-roll drive工作辊传动

Work tests roll检验工件主轴转角

work roll shift工作辊横移

英汉例句

• Meanwhile, the algorithm and the implementation way for calculating work roll offset are given.

  并提出了计算工作辊偏移量的计算方法及其实现方法。

• The configuration of dissymmetrical CVC work roll contour and symmetrical conventional backup roll contour results in bad self-maintenance of backup rolls in downstream stands.

  非对称的CVC工作辊与对称支持辊辊形配置易导致下游机架支持辊辊形自保持性差。

• The application results show that work roll and backup roll designed with this method have good adaptability, and the plate crown and roll consumption have been reduced greatly.

  经现场实践应用表明，采用该方法设计出的工作辊、支持辊辊型曲线适应性好，并大大地改善了板凸度和轧辊磨损情况。

• The work roll surface can be ground on-line by a non-driven cup type of on-line Roll Grinder(ORG) installed in a strip mill to maintain the appropriate roll shape.

  它通过设置在带材轧机上的无驱动式杯形磨辊装置，对轧制中工作辊表面进行在线磨别，以保证轧辊保持良好的轨型。

• And also it has a bend work roll and a bend middle-roll.

  并采用了工作辊弯曲和中间辊弯曲。

• The axial overload is the main factor which causes work roll bearings and back up thrust bearings of four high mill invalid.

  四辊轧机工作辊轴承及支承辊止推轴承失效的主要原因是轴向力过大。

• The paper discusses the necessity of applying double stepped backup rolls, and describes the methods for calculating the contact length and stepped depth and work roll crown.

  论述了采用双阶梯支承辊的必要性。提出了接触长度、阶梯深度及工作辊凸度的计算方法。

• It is indicated that the early main failure forms of cold work roll is spalling caused by local overheat and overload.

  指出冷轧工作辊早期失效主要形式为剥落，其原因为局部过热和过载。

• The axial overload is the main factor which causes work roll bearings and back-up thrust bearings of four-high mill invalid.

  四辊轧机工作辊轴承和支承辊止推轴承失效的主要原因是它们在工作中所受的轴向载荷过大。

• With axial shift of intermediate roll, the bending of work roll on HC mill can be effectively controlled and the controllability of profile increases.

  HC轧机通过中间辊的轴向移动，可有效地控制工作辊的弯曲：增强板形控制能力。

• Avoid high stress concentrations at the ends of the work roll barrel. Ensure good control of roll bending.

  避免在工作辊辊端部位应力过于集中。确保弯辊得到很好的控制。

• The thermal crown of work roll affects the quality of hot strip directly. Work roll cooling system and rolling schedule are all related with the thermal crown of work roll.

  轧辊热凸度直接影响着热轧带钢的板形质量，而轧辊冷却水系统和轧制计划都与轧辊热凸度有着密切的关系。

• This article describes that ZIS, through analysing the elastic deformation of the work roll and supporting roll, optimizes the roll crown.

  通过对带钢平整过程中工作辊和支撑辊受力、变形等特点的分析，优化了轧辊辊型。

• An independent module of work roll bending compensation is set in the feedback control system.

  在反馈控制环节中专门设置一个独立运行的模块，即工作辊弯辊补偿控制模块。

• A new work roll contour is advanced which is a linear variable crown (LVC) roll. This roll contour can realize linear ratio of gap crown and strip width.

  提出一种新型线性变凸度工作辊辊型即lvc辊型，这种辊型实现了辊缝凸度调节与板宽成线性化。

• According to the principle of CVC mills, the selection of work roll shape is discussed. Formulas used for the design of CVC work roll shape are given.

  根据CVC轧机的工作原理及板带轧制基本要求，探讨了CVC轧机工作辊辊型的选择条件，井导出了立方抛物线辊型的设计或磨辊曲线公式。

• A new work roll contour is advanced which is a linear variable crown (LVC) roll.

  提出一种新型线性变凸度工作辊辊型即lvc辊型，这种辊型实现了辊缝凸度调节与板宽成线性化。

• The practical application of LVC work roll contour indicates that the quality of strip shape can be improved and good utility can be obtained af...

  从使用LVC辊型与使用常规工作辊轧制的板形工艺数据比较可知，LVC辊型可以明显改善板形质量，具有较强的实用性。

• The work roll adjustment control industrial test of aluminium foil four-high mill roll system gyroscopic effect micro dimensional dynamic cross is being preceded.

  铝箔四辊轧机辊系陀螺效应动交叉微尺度行为的工作辊定位控制还在工业试验中。

• Nearly all rolling mills are fitted with work roll bending equipment.

  几乎所有的轧机均安装了工作辊弯曲装置。

• Excellent work roll cooling and thermal crown control are the effective measures for reducing work roll consumption, controlling plate shape and enhancing production yield.

  良好的工作辊冷却及热凸度控制是降低工作辊消耗、控制板型、提高生产收得率的有效措施。

• In practical production, it is easy to take place the fire and equipment accidents due to super temperature of work roll bearings box in aluminum cold rolling mill and foil rolling mill.

  实际生产中铝带材冷轧机和铝箔轧机易于发生由于工作辊轴承箱温度过高而造成的火灾和设备事故。