片语

pressure adjusting screw压力调节螺桿

adjusting lead screw一调整丝杠

spacing adjusting locking screw间隔调整锁定螺钉

adjusting g screw蝶螺钉

adjusting screw for transverse横向调整螺丝

zero adjusting screw零位调整螺钉

adjusting color screw调节螺旋

adjusting screw hex调整六角螺钉

adjusting worm screw卷边输调节螺丝

英汉例句

• the utility model can increase the swing assisting angle and the swing assisting strength through adjusting the central adjusting screw bolt to meet the requirements of different patients.

  它通过调节中心调节螺桿可增加助摆角度和助摆力 量，以适应不同患者的需要。

• to raise the reduced pressure - slowly turn the adjusting screw clockwise until the system gauge indicates the pressure required.

  如果要升高减少的水压，则慢慢顺时针方向旋转调节螺丝直到系统压力表指示达到所需压力为止。

• an adjusting screw at each side of the post draws the ends of the plates toward each other to press the plates tightly against the post.

  在每一个职位一边调整螺丝吸引了对彼此紧紧地按板块后对板块的结束。

• adjusting screw for outlet gas pressure is set on reducer; it can adjust working pressure for requirements.

  减压器上设有出气压力调整螺钉，通过调整出气压力螺钉来调节喷气阀所需求的工作压力。

• it can be adjusted by the adjusting screw caps located on the head covers of both sides. loose the locking screws beforehand, then re-tighten them after.

  可通过两侧端盖上的调整螺盖来进行，调整前应松开紧定螺钉，调整后拧紧。

• to lower the reduced pressure - turn the adjusting screw counterclockwise.

  如果要降低水压，则逆时针方向旋转调节螺丝。

• if valve clearance needs to be adjusted, loosen the locknut on rocker arm adjusting screw. turn adjusting screw until feeler gauge slips with a slight drag.

  如果气门间隙需要调节，松开摇臂调节螺丝上的防松螺母，转动调节螺丝直到测隙规滑动时稍带阻力为止。

• heavy duty adjusting screw. adjusting screw is both slotted and knurled .

  重型调节螺丝。调节螺丝既有槽也有花纹边。

• if the machine parts don't have adjusting screw caps, then it can be solved by turning the head covers.

  如果机构是没有调整螺盖的，可用车削端盖的方法来解决。

• the upper end of the adjusting screw (7) is provided with a frustum-shaped valve needle (6).

  所述调节螺桿（7）的上端具锥台形阀针（6）。

• the switch position of butterfly disc is limited by the adjusting screw pole on the worm gear transmission device. the indicating device displays the position of the valve switch.

  蝶板的开关位置都由蜗轮传动装置上的调节螺桿限位，指示牌指示阀的开关位置。

• calibrated adjusting screw for occasional changes in pressure setting without the use of a pressure gauge.

  偶尔的变话采用校準调节螺栓进行调节，不需要使用压力表。是一款您理想的选择。

• and 6 intake valves. tighten valve adjusting screw locknut to 27 n·m (20 lb-ft).

  将气门调节螺丝防松螺母拧紧至27牛顿·米（20磅-呎）。

• the utility model relates to a super flat ruler which is composed of adjusting screw rods, a fixed support, a screw, a super flat plate, a super flat ruler, a horizontal scale and a bracket.

  本实用新型涉及一种超平尺，它由：调整螺旋桿、固定托、螺钉、超平板、超平尺、水平标、支架构成。

• to optimize the adjusting screw down and the speed parameters by the computer shall ensure the dimension accuracy of the wire rod products for different steel grade and specifications .

  该系统的应用可以取代传统的轧机调整的经验方法，利用计算机计算并优化调整压下和速度参数等，在不同钢种、不同规格的高速线材生产中都能确保产品的尺寸精度。