英语释义

• a solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite

片语

proeutectic austenite初晶活斯田铁

nitrogen austenite含氮奥氏体

austenite structure奥氏体组织

austenite grain[材] 奥氏体晶粒

austenite transformation奥氏体转变

carbon austenite含碳奥氏体

undercooled austenite[机]

eutectic austenite共晶奥氏体

austenite crystal奥氏体晶粒

austenite matrix奥氏体晶体

retained austenite[机] 残留奥氏体；残留沃斯田铁

英汉例句

• This article mainly studies one kind improved two person two-sided synchronized GTAW process for the austenite stainless steel.

  介绍了一种改进的奥氏体不锈钢的双人双面同步钨极氩弧焊工艺。

• And solution treatment is the valid method to improve the anticorrosion property of the austenite stainless steel bellows.

  固溶处理是改善和提高奥氏体不锈钢波纹管抗应力腐蚀能力的有效措施。

• In this paper, the traditional HAZ grain growth model is analyzed. Based on the model, analytical model of austenite grain growth fit to high strength pipe-steel is introduced.

  分析了传统的焊接热影响区（HAZ）晶粒长大模型，在此基础上，介绍了适用于高强度管线钢的奥氏体晶粒长大的耦合模型。

• The effect of some common alloying elements on austenite dendrites forming had been analyzed by differential thermal-liquid quenching analysis.

  用微分热分析-液淬法研究几种常用合金元素对奥氏体枝晶形成与长大形态的影响。

• A new method for showing the prior austenite crystal boundary corrosion, of pipeline steel has been also supposed.

  同时探索出一种新的管线钢原奥氏体晶界腐蚀方法。

• Measures should be taken to prevent the vertical snake tube from steam binding, iron oxide depositing, and austenite corrosion when superheater is cleaned.

  过热器整体清洗时，应有防止垂直蛇形管产生汽塞、铁氧化物沉淀和奥氏体腐蚀的措施。

• It may also use signal process system to decrease noise efficiently for compound expanded pipes, due to austenite rough grain size.

  对于复合扩径管，由于奥氏体粗晶度的原因，也可以采用信号处理系统有效地降低噪音。

• Control of this reaction, which arises due to the drastically different carbon solubility of austenite and ferrite, enables a wide range of properties to be achieved through heat treatment.

  控制这一由于奥氏体和铁素体的碳溶解性完全不同而产生的反应，使得通过热处理能获得很大范围的特性。

• The iron wants to change from the FCC austenite structure to the BCC ferrite structure, but the ferrite can only contain 0.02% carbon in solid solution.

  铁需要从面心立方体奥氏体结构转变为体心立方体铁素体结构，但是铁素体只能容纳固溶体状态的0.02%的碳。

• The process investigation on hybrid YAG - MAG laser arc welding of austenite stainless steel is systematically developed.

  针对奥氏体不锈钢材料，系统地开展了YAG-MAG激光电弧复合焊工艺研究。

• A metastable aggregate of ferrite and cementite resulting from the transformation of austenite at temperatures below the pearlite but above the marten site start temperature.

  一种亚稳态铁酸盐和碳化铁集合体，由奥氏体在低于珠光体温度但高于马氏体初温时变性而形成。

• Retained austenite reduction and carbide precipitations in the martensite are anticipated by the tempering process.

  减少残余奥氏体和马氏体碳化物的降水预计的回火工艺。

• Through the comprehensive analysis, the result shows that crack failure reason is embrittlement of the austenite stainless steel at high temperature.

  通过综合分析指出对流管发生失效的原因是奥氏体不锈钢长期在高温下工作引起的热脆化开裂。

• An austenite shell is formed over the entire surface of the graphite nodules.

  在石墨球的整个表面形成了一层奥氏体壳。

• As a result, higher mill entry temperatures, lower mill exit speeds at a given finishing temperature and thinner gauges in the austenite range could be realized.

  结果，轧机的入口温度较高，实现了在给定的精轧出口温度较低，以及在奥氏体范围内更薄的压力表。

• Effect of Manganese on austenite cooling transformation of high Chromium cast iron is investigated.

  研究了锰对高铬铸铁奥氏体冷却转变过程的影响。

• The effect of uneven distribution of strain during compression on dynamic recrystallization and grain size of austenite was analyzed.

  分析了热模拟变形过程中的非均匀应变对奥氏体动态再结晶及晶粒尺寸的影响。

• The corrosion behavior of austenite stainless steel weld joint in the different acidic medium was studied.

  研究了奥氏体不锈钢焊接接头在不同酸性介质中的腐蚀行为。

• The stable reverted austenite formed during heat treatment would be positive to the fracture toughness.

  热处理形成的稳定的逆转变奥氏体对断裂韧度起到积极作用。

• The deformation temperature is the main factor which affects the grain size of austenite or ferrite when the strain rate is not changed largely.

  说明在变形速率不太高的情况下，变形温度是影响奥氏体或铁素体晶粒尺寸的主要因素。

• The results shows that the corrosion is an ideal austenite crystal boundary corrosion for pipe line steel. The accuracy of adopted determination method is high.

  结果表明，此浸蚀剂是管线钢一种理想的奥氏体晶界浸蚀剂，所采用的测定方法的精确度较高。

• The results showed that after the deformation of unrecrystallized austenite and quenching, martensite block width decreased and bent, while the packet size increased to some extent.

  结果表明：奥氏体未结晶区变形并淬火后，马氏体包的尺寸增大，而马氏体束的尺寸明显减小并发生弯曲。