austenitic
adj. 奥氏体的
2025-09-06 13:43 浏览次数 6
adj. 奥氏体的
"austenitic alloy steel"
austenitic dendrite奥氏体枝晶
austenitic range奥氏体区
austenitic steel[材] 奥氏体钢;沃斯田钢
Austenitic series沃斯田铁系
retained austenitic残留奥氏体
Fully austenitic完全奥氏体
austenitic alloys奥氏体合金的
austenitic stainless steel[材] 奥氏体不锈钢;沃斯田不锈钢
austenitic manganese steel[材] 奥氏体锰钢
austenitic stainless奥氏体不锈钢管
Austenitic Steel[材] 奥氏体钢;沃斯田钢
austenitic cast iron沃斯田铸铁;[材] 奥氏体铸铁
austenitic area奥氏体区
these are bolting materials suitable for high temperature service with austenitic stainless steel valve materials.
这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
corrosion behaviors of a austenitic alloy with boron for rolls in pure zinc bath and galvanizing bath were carried out in this work in order to better understand the reaction mechanism.
本文系统地研究了含硼奥氏体多元合金在纯锌液中的静态腐蚀行为和在工业锌液中的动态腐蚀行为,并探讨了其耐锌腐蚀机理。
the strength, toughness and surface hardness of medium manganese austenitic steel have been increased greatly by casting surface alloying and complex modification.
通过铸造表面合金化和复合变质处理,使中锰奥氏体钢的强度、韧性和表面硬度显着提高。
in this paper the effect of alloyed modification for carbon content, carbide shape and distribution in austenitic manganese steel has been studied.
研究了合金化变质改性对提高奥氏体锰钢基体碳含量,改变析出碳化物形态及分布的影响。
by microalloyed inoculant treatment, the austenitic grain size and microstructure can be remarkably fined.
微合金变质处理可细化奥氏体晶粒和显微组织;
this paper mainly introduces the stainless steel corrosion, especially the serious accidents caused by the austenitic stainless steel stress corrosion crack.
论文主要介绍了不锈钢的腐蚀尤其对奥氏体不锈钢的应力腐蚀开裂引起的严重事故。
examples of such materials are: austenitic stainless steels.
例如材料是奥氏体不锈钢。
on the basis of systematical study, the comprehensive effects of alloying elements in cryogenic austenitic steels were analyzed.
在系统研究结果的基础上,分析总结了低温奥氏体钢中合金元素的综合作用。
austenitic crni steels and their corresponding castings are permissible.
可以使用奥氏体铬镍钢及其对应的铸造材料。
the effect of carbon, molybdenum and rare earths on hot cracking susceptibility of austenitic stainless steel welds was studied with continuously variable deformation rate cracking test (vdr) method.
应用变形速率连续可变式热裂纹试验方法(vdr法)研究了碳、钼和稀土元素对奥氏体不锈钢焊缝热裂敏感性的影响。
the result showed that austenitic cast iron with d-type graphite had excellent oxidizing resistance. the study provided experiment proof for application for glass moulds.
结果表明,d型石墨奥氏体基体铸铁具有较好的抗氧化性能,可为该合金用于玻璃模具提供生产依据。
dissimilar joints, i. e. welds between carbon or manganese steels and stainless ferritic, ferritic austenitic or austenitic steels with a cr content in excess of 17% are not permissible.
不同材料的焊接,例如碳钢或锰钢与铬含量超过17%的铁素体不锈钢,铁素体奥氏体不锈钢或奥氏体不锈钢之间的焊接是不允许的。
where austenitic bolting materials have been carbide solution treated and strain hardened, they are designated class 2 in astm a193. astm a194 nuts of corresponding material are recommended.
在此奥氏体螺栓材料经过碳化溶液处理和应力硬化处理,因此归在astma193类别2里。推荐采用相应材料的astma194螺母。
austenitic filler materials are not permissible.
不得使用奥氏体填充材料。
plasma nitriding treatments of 304 austenitic stainless steel were performed at 400 ℃ for different time.
对304奥氏体不锈钢进行400℃不同时间的离子渗氮处理。
investigation showed that, in this new nickel cast iron, besides graphite and austenitic base, had yet alloying cementite.
研究表明:在这种新型镍铸铁中除了石墨和奥氏体基体外,还有合金渗碳体存在;
we shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
我们将为奥氏体不锈钢管的水压试验引进凈水。 。
where austenitic bolting materials have been carbide solution treated but not strain hardened, they are designated class 1 or class 1a in astm a193.
在此,奥氏体螺栓材料经过碳化溶液的处理,但是没有经过应变硬化,因此归在astma193的类别1或类别1a。
the technology for tightness improvement of the ni austenitic cast iron cable head is studied.
分析了提高镍奥氏体铸铁电缆插头铸件致密性的工艺方案。
austenitic stainless steel including clad plate shall generally be subjected to cold forming.
奥氏体不锈钢包括包装板通常使用冷成型。
most cast iron has curie point at about 1 040k except austenitic cast iron and white cast iron, their thermal diffusivity is the minimum there.
除奥氏体铸铁和白口铸铁外大多数铸铁在1040k附近存在居里点,导温系数在该处出现最小值;
the analysis of micro zone discovers that there are directly relationships between the distortion structure of eutectic austenitic and lower ductility.
微区分析发现畸变的共晶奥氏体组织与球墨铸铁低韧性之间存在着直接的对应关系。
hot extrusion is the advanced production process for high-performance austenitic stainless steel pipes.
热挤压是优质高性能奥氏体不锈钢管材的先进生产工艺。
the concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。