片语

axial free vibration轴向自由振动

axial vibration of shafting[机]

Axial bending vibration mode轴向弯曲振动模态

omni-axial random vibration全轴随机振动

blade axial bending vibration叶片轴向弯曲振动

multi-axial random vibration多轴随机振动

axial vibration damper轴向振动减振器

axial l vibration轴向振动

英汉例句

• a empirical equation of the leakage of belleville ring seal is presented, and a correction for the axial vibration is given.

  本文通过试验得出了碟形圈密封漏失量的经验公式，并对轴向振动的影响进行了修正。

• dynamic absorber is an effective instrument to reduce axial vibration of ship shafting and its parameters optimization will be the key to the reasonable control of vibration.

  在船舶轴系中安装动力减振器是减小轴系纵向振动的有效方法，而对动力减振器参数优化的研究是有效控制振动的关键之一。

• this lays down a theoretical foundation for quick selection of right axial vibration drilling parameters and successful automatic machining of deep holes.

  为快速选择合适的轴向振动鉆削参数，实现深孔的顺利加工与自动化加工奠定了理论基础。

• this paper studied the principle and method of calculation for the coupled torsional axial vibration of the crankshaft for a high speed vehicle diesel engine.

  本文研究了高速柴油机轴系的扭转—纵向耦合振动的机理和计算方法。

• the calculation method of drilling string axial vibration is given. meanwhile, the different methods of analysing drilling string axial vibration state are supplied in different surveying condition.

  并给出计算任意组合鉆柱系统的轴向振动稳态响应的一般方法，提供不同测量条件下分析鉆柱轴向振动状态的不同方法。

• the study of torsional vibration and bending and axial vibration of crankshaft system are summarized in this paper.

  简单综述了内燃机曲轴扭振、弯振和纵振的研究内容及相关方法。

• up to the present, all published vibration drilling chip breaking theories considered that in zero-phase-difference axial vibration drilling, chip breaking was impossible.

  该文打破了传统上一直认为零相位差振动鉆削不能断屑和这种情况下振动鉆削效果不明显的错误观点。

• the calculation method of drilling string axial vibration is given. meanwhile, the different methods of analysing drilling string axial vibration state are…

  并给出计算任意组合鉆柱系统的轴向振动稳态响应的一般方法，提供不同测量条件下分析鉆柱轴向振动状态的不同方法。

• by observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

  通过观察和检测数据分析，电动机的平板式钢板端盖改为盘式铸铁端盖，可提高端盖刚度，降低电机轴向振动。

• analysis of the influence of drilling fluid on axial vibration of drill string;

  采用瑞利法对高速内燃机曲轴纵向振动进行研究。

• the circumferential-direction vibration mode and axial vibration mode of the ceramic ring are discussed.

  对圆管周向和轴向振动两种振动模式进行了讨论。

• sample the radial and axial vibration of the blade, and carry on power cepstrum, frome a new id saw blade slicing till to its invalidation;

  采集从新锯片开始锯切到失效整个过程中，锯片径向和轴向振动信号。

• the response of the polymer melt behavior of orientation for axial vibration of screw in short pipe extrusion die head was studied by the light scattering technology.

  利用光散射测量方法研究了短圆管挤出模头中聚合物熔体取向行为对螺桿轴向振动的响应。

• the axial vibration was obvious while the radial and tangent vibration was inconspicuous due to the cutting force, so the cutting noise owed to the axial vibration.

  在锯切力作用下，圆盘锯轴向振动明显，径向和切向振动较小，锯切噪声主要是由轴向脉沖激励引起锯片的轴向振动造成的。

• based on the shear theory of newtonian viscous liquid, the fusible damp coefficient is established for electromagnetism dynamic polymer extruder screw's axial vibration system.

  对聚合物电磁动态塑化挤出机螺桿轴向振动系统，根据牛顿型粘性流体的剪切理论，确定了聚合物熔体的阻尼系统。

• this paper briefly introduces an effective method in measuring axial vibration for marine propulsion system by using eddy-current transducer. the result of testing on an export tanker is discussed.

  本文简述了利用电涡流测振仪对船舶推进轴系的轴向振动的测量方法，并对一艘出口油船的测量结果进行了讨论。

• complex-modal analysis method is used to solve the linear partial differential equation governing axial vibration of transmission tower pile foundation.

  用复模态方法求解了输电桿塔基桩轴向振动的线性偏微分方程。

• the influence of structure axial vibration on the internal ballistics of solid rocket motor was investigated.

  文中研究了固体发动机结构的轴向振动对燃烧室内弹道性能的影响。

• it has been successfully applied to solve the problems of truss structure system, axial vibration system, rotor system and plane beam system etc.

  实现了对桿单元的轴向振动系统、析架系统，平面梁单元的转子系统等上述两类问题的求解。

• the axial vibration of bearing pedestal is referring to vibration in same direction of the rotor shafts centre line.

  在汽轮发电机组，特别是一些中、小容量机组的运行中，轴承座的轴向振动是其垂直或水平振动的数倍甚至几十倍。

• the flow behavior of polymer in the cylindrical runner under the field of the axial vibration force during the course of electromagnetic dynamic injection molding was studied.

  对聚合物电磁动态塑化挤出机螺桿轴向振动系统，根据牛顿型粘性流体的剪切理论，确定了聚合物熔体的阻尼系统。

• the exciting sources for axial vibration of disk, especially the new axial gas dynamic force induced by travelling waves and its properties, and influence on the vibration of disks are studied.

  本文对涡轮机中轴流叶轮盘的激振源，特别是行波振动诱发的轴向力、力的性质、对振动的影响等作了分析。

• the size and location of the maximum dynamic stress induced with axial vibration were found, the relation between the vibration quantity and the maximum dynamic stress was analyzed.

  求出由轴向振动引起的最大动应力的大小及位置，进而对振动量与最大动应力的关系进行剖析。