片语

casting rolling process铸轧

metal casting solidification process金属铸造凝固过程

Advanced Casting Production Process先进铸造生产工艺

casting filling process铸造充型过程

casting insulation process浇铸绝缘工艺

casting filtration process铸渗工艺

casting solidification process铸件凝固过程

Casting Scratch Process铸型压碎制程

英汉例句

• in this paper the influence of the coating properties on aluminum alloy fillability in lost foam casting process with unbonded sand is studied.

  本文研究了涂料的保温性和透气性对铝合金千砂消失模铸造充填能力的影响。

• the precision controls during investing casting process based on sls are researched and analyzed, and some means to solve the precision problems are put forward.

  对基于sls技术的精密铸造过程中的精度控制进行了研究分析，并提出了解决办法。

• based on this, the design of casting process was optimized, the solidification process was simulated again, the results of simulation were compared and analyzed.

  在此基础上对其铸造工艺进行了修改，工艺优化，又一次进行凝固模拟，对前后模拟结果进行了分析与比较。

• finally, the casting process to be reasonable.

  最后就是对于铸造工艺要合理。

• due to difficulty in casting process for production of abnormal shape aluminum castings, the practical experiences and computer solidification simulation are relied on.

  大型异形铝铸件，铸造工艺难度较大，常需依赖于丰富的生产经验辅之以计算机凝固模拟分析技术。

• the low-pressure casting process and die design for automobile housing were introduced.

  介绍了汽车壳体零件低压铸造工艺与模具设计。

• this experiment also has reference value to the control of secondary inclusion in other casting process conditions.

  实验研究对于其它铸造工艺条件下二次非金属买物的控制亦有一定的参考价值。

• the centrifugal casting process of high aluminum-zinc alloys was investigated through products.

  结合产品试验了高铝锌基合金的离心铸造工艺。

• the age range is the most important part of this casting process and these two are the best fit for a romantic tangle in the middle of gunfire and excitement.

  年龄范围是这次选角过程中最重要的部分，而这两位最适合在枪火和刺激中浪漫地纠缠在一起。

• effect of aluminium on the non-metallic inclusion in zg35 in suspension casting process was studied in production condition, and the mechanism was investigated by modern testing technique.

  本文研究了悬浮铸造过程中铝对zg35中非金属夹杂物的影响（在生产条件下），并用现代检测技术对其作用机理进行了初步探讨。

• casting process is one of the most inportant processes for preparing particle reinforced aluminum based composite material.

  铸造法是目前最主要的一种制备颗粒增强铝基复合材料的方法。

• the stages or steps in a casting process are the making of a suitable mold, the melting of the material, the filling or pouring of the material into the cavity, and the solidification.

  铸造工艺中的阶段或步骤包括制作适当的铸型，融化材料，将材料充满或灌注进型腔和凝固。

• numerical simulation for casting process may optimize craft design, shorting trial cycle, cut the cost, decrease casting defect and assure the casting quality.

  铸造过程的数值模拟可以优化工艺设计，缩短产品试制周期，降低成本，减少铸件缺陷，确保铸件质量。

• besides optimization of the casting process the objective of these fem calculations is to improve mould life as well as cast product quality.

  使用fem软件计算，除了可以优化连铸过程，还可以提高结晶器寿命，同时提高连铸产品的质量。

• after all, the choice and control of continuous casting process parameters are also different during continuous casting different steel grade.

  由此，在连铸不同钢种时，连铸工艺参数的选择与控制的重点也各不相同。

• pattern inspection: the pattern inspector should examine the pattern as per casting process drawing after pattern completion.

  模具检验：模具制作完毕后，由模具检验员按照铸造工艺图对模具进行检验。

• equipment used in a casting process includes furnaces, mold-making machinery, and casting machines.

  铸造工艺中使用的设备包括熔炉、铸型制作机械和铸造机械。