片语

Casting high speed steel铸造高速钢

virtual casting speed虚拟拉速

effective casting speed有效拉速

Actual Casting Speed实际拉速

Casting Roller Speed流延辊速度

casting rolling speed铸轧速度

characteristic casting speed特征拉速

rolling casting speed铸轧速度

casting belt speed流延带速度

英汉例句

• There are a number of factors affecting the casting speed, and the casting speed has to be adjusted according to different situations.

  因为影响拉坯速度的因素很多，所以必须根据不同的情况调整拉坯速度。

• Analysis is done to the causes of reject A30 block with sand inclusion, i. e. the elements of molding sand feature; cast structure, casting speed and arrangement for casting system, etc.

  对A30气缸体夹砂废品产生的原因，即型砂性能、铸件结构、浇注速度、浇注系统的布置等方面的要素进行了分析。

• The increase of casting speed of continuous caster could make the time shorter for the soaking of slabs.

  提高连铸机的拉坯速度可以使铸坯均热所需的时间明显缩短。

• During ingot casting, control of casting speed is an important measure to improve the surface and inner qualities.

  铸锭时控制钢液的注流速度，是改善和提高钢锭表面和内部质量的重要工艺措施。

• The links among the pressure, the casting speed and the gap in the casting passage have been analyzed with the hydraulic modelling test.

  结合水模型试验分析了浇铸通道内压力、拉坯速度和间隙三者之间的关系。

• At proper pouring temperature and mold temperature, the effect of die casting speed and pressure on microstructure and properties of AM60B alloy has been studied.

  固定浇注温度和铸型温度，研究压射速度和压射比压对压铸am 60 B合金组织与性能的影响。

• With the casting speed increased, tile location of backflow would move down, the area of backflow zone would enlarge, and the effect of backflow would enhance.

  研究还表明，随着铸轧速度的增加，回流区位置下移且回流区面积增大，回流作用增强。

• This paper analyzes the effect of mould lubrication, tundish exchange, mould service life and casting speed on the friction based on the measurement of oscillating motor current.

  通过对振动电机电流的测量，分析了结晶器润滑、更换中间罐、结晶器寿命、拉速等因素对摩擦力的影响。

• Therefore, the cooling intensity and the casting speed can be rationally determined by the thickness of strand shell.

  因此可根据坯壳厚度合理地确定冷却强度及拉坯速度或由冷却强度预测坯壳厚度。

• So, the casting speed plays an efficient role in readjusting the molten steel surface level in pool and rolling force.

  铸轧速度是调节熔池液面高度和轧制力的有效手段。

• It is found from the result of calculation that when casting speed is constant, superheat and intensity of cooling have remarkable influence on the front edge of solidified shell.

  根据模拟计算结果发现，在拉速一定的条件下，过热度和冷却强度对钢液的凝固前沿有着显着的影响。

• The results showed that roll casting speed increase with the decrease of the thickness of the strip, and the …

  随着铸轧速度降低、铸轧区增大与铸轧坯厚度减薄，轧制压力峰值增大；

• Each slab is controlled separately in twin casting mode. Mold oscillation and casting speed are controlled independently.

  在双机铸造的模式下，可以分别控制每块板坯，而结晶器振动系统和铸造速度也是独立控制的。

• Use: Energizes a Paladin with light, increasing melee attack and spell casting speed by 25% for 20 SEC.

  使用：使圣骑士充满圣光之力，增加物理攻击与施法速度25%，持续20秒。