英汉例句

• the effects of current density, bath temperature and coating thickness on the solderability and wetting balance of pd coating electroplated on phosphor-bronze were studied.

  研究了电流密度、镀液温度及镀层厚度对磷青铜上钯镀层的焊锡性与润湿平衡的影响。

• cartons, cardboard resistance broken meter, temperature tracker, coating thickness gauge , hardness and a high degree of regulation, and other devices.

  纸箱、纸板耐破度仪、炉温跟蹤仪、涂层测厚仪、硬度计、高度规等测试仪器。

• plastic heavy wire mesh of the raw material is coated with a pvc plastic coated wire, plastic coating thickness of about 1mm or so.

  包塑重型六角网的原料铁丝是涂敷了pvc塑料涂层的铁丝，塑料涂层厚度大约在1mm左右。

• the preparations before test shall include corrosion check, mechanical inspection, vehicle photo, coating thickness measurement, metal thickness identification, paint layer scratch and etc.

  试验前的準备工作包括腐蚀检查、机械检查、车辆拍照、涂层厚度测量、金属厚度识别及油漆层划线等。

• the measurement principle, current structure, function, characteristic and present development situation of coating thickness gauge by magnetic method and eddy current method are introduced.

  介绍了磁性方法和电涡流方法测厚仪的测量原理、电路结构、性能特点及其在国内的发展状况；

• it finally discusses measuring methods of coating thickness and technical problems to be solved in measuring methods.

  文章最后讨论了「涂层厚度的检测方法」及检测方法中需解决的一些技术问题。

• measuring range coating thickness measurement.

  测量范围涂层厚度测量。

• the deposition rate and coating thickness were determined, and the effects were compared with those of electroplating.

  对镀速和镀层厚度进行了测定，并与电镀进行了效果比较。

• note: we can manufacture the products upon special requirements of clients, and thickness, rigidity of copper matrix and tin coating thickness can also be adjusted upon the requirements of clients.

  备注：其它规格可以按客户特殊要求加工定做，铜基厚度、铜基硬度和锡层厚度可以按用户要求调整。

• the results showed a good agreement between the coating thickness data predicted by the present model and the data measured experimentally.

  结果表明：该模型对镀层厚度的预测值与实测值之间有很好的相关性，可準确地预测不同电流密度、电镀时间下的镀层厚度。

• through the numerical analysis, it is posed that the structure surface stress gradient and the coating thickness are the principal factor that influence thickness effect.

  通过数值分析提出，构件表面应力梯度和贴片厚度是影响厚度效应的主要因素。

• the results show that thermal insulation coating and suitable coating thickness are helpful to improving the filling velocity of liquid aluminum.

  结果表明，保温涂料及一定的涂层厚度有利于提高铝液的充型速度。

• tools with internal contours (drilled holes; slots; etc. ) can be coated. depending on the geometry, the coating thickness will diminish as their depth increases.

  模具的内部轮廓（孔，槽等）也可以涂层。涂层的厚度会随着深度增加而减小。

• the required finished coating thickness shall be specified by the purchaser. the specified thickness should not exceed the maximum recommended by the coating manufacturer.

  业主需要确定涂层的厚度，但是厚度不应超过涂层生产商的建议厚度。

• influencing factors to the uniformity of coating thickness for alkaline zinc plating have been studied systematically by hall-cell test.

  采用霍尔槽试验对堿性镀锌镀层厚度均一性的影响因素进行了研究。

• the influences of curing agent, pigment volume concentration (pvc) and coating thickness on the features of the coating are discussed.

  考察了固化剂、助剂、颜料体积浓度、涂层厚度等因素对涂层性能的影响，探讨了水性涂料的固化成膜机理。

• reducing plating time and coating thickness can solve these problems. so these methods can solve quality problem of the bubbling and…

  减少施镀时间，降低镀层厚度，解决了镀层起泡脱皮质量问题，保证了化学镀镍零件的防腐性能。

• on the basis of electromagnetic induction principles, this paper primarily discusses the design of electrocircuits and probes for coating thickness monitor.

  该文根据电磁感应原理，主要讨论涂层厚度监测仪电路和探头的设计。