英语释义

• capable of being easily compressed

• capable of being compressed or made more compact;

  "compressible packing materials"

  "a compressible box"

片语

compressible model可压缩模式

Compressible Flows可压缩流动

compressible fluid[流] 可压缩流体；可压缩铃

compressible flow[流] 可压缩流；可压缩的流动

compressible support让压支架

compressible film可压缩膜

compressible strength压缩强度

Flow compressible可压缩流

compressible aerodynamics可压缩空气动力学

compressible shale压缩页巖

英汉例句

• Numerical results are obtained for the three dimensional compressible flow field of low pressure turbine exhaust hood.

  以数值模拟为手段，描述了透平低压排气缸内部复杂的三维可压缩湍流流场。

• The Shanghai area belongs to high moisture content and high compressible soft soil geological structure. The cost of foundation pit support holds larger proportion of construction installation cost.

  上海地区属高含水量、高压缩性软土地质，基坑支护费用占建安造价较高比例。

• In the annular gap scrubber, there exists complicated three-dimensional compressible flow associated with the two phase flow and heat transfer between gas and water particle.

  环缝洗涤器内是一个高速可压缩三维流动过程，并伴随有高炉煤气和雾化水滴的两相流动传热。

• A method based on complex frequency domain analysis is presented for the simplification of the partial differential model of non compressible fluid transportation process.

  通过复频域分析，从理论上提出了一种建立输送管内不可压缩流体动态传送简化模型的方法。

• Because of the high compressible property of MSW, the influence of initial void ratio is very little.

  由于MSW的高压缩性，初始孔隙比不同对试样的动力特性影响不大。

• But plain old bzip2 on the original XML file does 11 bytes better at generating a compressible structure than do my attempts.

  原始xml文件上普通的旧bzip2在生成可压缩的结构上比我的尝试好11个字节。

• An implicit time-marching method is presented for computing the three-dimensional steady inviscid compressible flow fields.

  本文提出了求解三维定常无粘可压缩流场问题的一种隐式时间推进法。

• Effect of compressible term and that of viscous term are different in different time.

  压缩项和粘性项的影响则随时间的不同而不同。

• The Vortex Dynamics Equation is developed for compressible flow and its characteristics are analyzed.

  推导了可压缩流动旋涡动力学基本方程，并分析了其基本性质。

• The basic relationship of plastic mechanics of the rigid plastic compressible material under non-principal axis condition was finalized through two different approaches.

  本文从两个不同的途径证明了刚塑性可压缩材料在非主轴条件下的塑性力学基本关系式。

• You can obtain considerably better compression rates when you use the specific structure of XML documents to produce more compressible representations.

  当使用XML文档的特定结构以产生可压缩性更好的表示时，您就可以取得好得多的压缩比。

• It is the hardest, the least compressible and the best thermal conductor among all known materials.

  这是最难的，最起码可压缩及最佳热导体之间的所有已知材料。

• The governing equation of viscous compressible fluid and the boundary conditions for injection molding was formulated, based on which the governing equation about pressure field was derived.

  建立了黏性可压缩流体的控制方程，给出了适合注射成型特点的边界条件及黏度模型，导出了求解压力场的控制方程。

• Consider a row of guide vanes in a compressible internal flow as shown below.

  如下图所示，考虑可压缩内部流中的一排导流叶片。

• A new method for calculating the capacity of pipeline in transporting compressible and incompressible fluids (flux) is presented in this article.

  本文对不可压缩流体和可压缩流体管路的输送能力(流量)提出了一种新的计算方法。

• Some cases of compressible flow as well as incompressible flow are presented.

  分别对可压缩叶栅流场的亚音速和跨音速流动进行了数值模拟计算。

• The book is aimed at chemical engineering applications, and consequently it is limited to thermally compressible flows ( low Mach numbers).

  书针对化学工程应用，并且从而这热局限于是可压缩的流动（低的马赫数）。

• The authors present a method for designing and manufacturing the cylindrical compressible spring of mini-piston.

  介绍一种微型活塞回位圆柱压缩弹簧的设计与制造方法。

• The transient flow field induced by a high-speed train moving into a tunnel is a three-dimensional, compressible and turbulent field.

  高速列车突入隧道时隧道洞口的流场是一个复杂的三维、可压缩、非定常的紊流流场。

• Transonic tube wind tunnel flows over supercritical airfoils with slots on both upper and lower walls have been simulated by using compressible unsteady two dimensional Navier-Stokes equations.

  本文采用二维可压缩非定常N-S方程模拟了带有上下开槽壁的跨声速二维管风洞中超临界翼型绕流的流场。

• The second technique is to take advantage of the very specific structure of XML documents to produce more compressible representations.

  第二种技术是利用XML文档非常特定的结构生成更可压缩的表示。

• The extrusion of compressible material in plane strain is analysed in use of UBET and compared to fully dense material.

  应用上限元方法分析了可压缩材料平面应变挤压问题，并与致密材料进行了比较。

• The course begins with the basics of compressible fluid dynamics, including governing equations, thermodynamic context and characteristic parameters.

  本课程从可压缩流体动力学的基础开始讲起，内容包括控制方程、热力学背景知识和特性参数。

• To offer a theoretical foundation for chemical equipment design, three-dimensional numerical simulations are made for compressible turbulent mixing shear layer based on large eddy simulation(LES).

  为了加深对复杂流动混合现象的认识，为化工设备设计提供理论基础，用大涡模拟方法对可压缩气体混合层进行了三维数值模拟。