英语释义

1. the stress that results from the shortening in one dimension of an elastic body due to oppositely directed collinear forces tending to crush it

片语

compressive E stress压应力

compressive tensile stress压拉应力

heat使激动；把…加热

Increasing Compressive Residual Stress提高压缩残余应力

pressure迫使；密封；使……增压

compressive flow stress压缩流动应力

compressive surface stress layer表面压应力层

compressive residual stress field残余压应力场

Compressive residual stress残余压应力

allowable compressive unit stress容许单位压应力

compressive principal stress压缩主应力

英汉例句

• objective to investigate the effects of different static compressive stress on the biological characteristics of the mandibular condylar chondrocytes(mcc).

  目的探讨不同静压力对髁突软骨细胞生物学特性的影响。

• this kind of nanostructured surface layer with compressive stress could significantly increase the fatigue strength of butt welded joint.

  这种压应力纳米强化层可以明显地提高对接接头的疲劳性能。

• tempered glass is one kind of high-strength glass with even compressive stress on the surface which is made by heating float glass to nearly softening point and then cooling it down rapidly by air.

  钢化玻璃是将浮法玻璃加热至软化温度附近后用空气均匀地快速冷却，使玻璃表面具有均匀应压力的一种高强度安全玻璃。

• moreover, this paper analyses the shear strain and compressive stress and loading frequency dependence of the damping ratio.

  另外，对叠层橡胶支座的阻尼比随剪应变、压应力及荷载频率的变化情况进行了分析。

• the cast of concrete at different end and the post-tensioning of continuous prestress make the negative bending moment section of the permanent support have different compressive stress reservation.

  不同的连续端混凝土浇筑和后连续预应力张拉顺序会导致永久支座负弯矩区的压应力储备不同。

• the method of combination of the two ways can availably increase the radial compressive stress and smooth the hoop stress.

  和多厚环过盈套装的方法结合起来装配飞轮，可以有效地增大径向压应力，缓和环向应力；

• the distribution of radial stress is the same as that of oil film pressure, which means compressive stress at the pressure region.

  径向应力的分布与油膜压力的分布相同，压应力存在于油膜压力区域。

• tensile stress and compressive stress have different effects on the magnetic domain structure.

  同时，拉应力和压应力对磁畴结构的影响规律不同。

• a new explanation of reason why the rolling contact fatigue life can be prolonged by residual compressive stress and retained austenite was advanced.

  并对残余压应力和残余奥氏体可以提高接触疲劳寿命的原因提出了新的解释。

• this paper delivered the relationships of uniaxial tensile and compressive stress with strain and bending properties, and felt-bending strength of cement mortar with polyvinyl acetate(pvac).

  研究掺聚醋酸乙烯水泥砂浆的轴拉和轴压应力—应变关系、抗弯性能以及长期粘结抗弯强度。

• it is found that in lined ceramic the radial cracks is caused by compressive stress field and net cracks caused by heat stress field.

  研究表明，内衬陶瓷层中主要分布着由压应力场所造成的径向裂纹和因热应力场所引起的网状裂纹；

• the analysis of mechanical model shows that the fracture toughness is improved by residual compressive stress of substrate surface, which resists the tensile deformation of substrate.

  力学模型分析表明，基体残余压应力以抵抗基体拉伸变形的方式提高了铬层的断裂韧性；

• these larger ions take up more room and are pressed together when the glass cools, producing a layer of compressive stress on the surface of the glass.

  这些钾离子占据更大的空间，当玻璃冷却下来的时候，钾离子便挤压在一起，从而在玻璃表面生产一层压应力层。

• stress concentration caused by chamber's excavation engenders tensile and compressive stress to surrounding rock.

  洞室开挖会使围巖周边产生应力集中，产生拉应力与压应力。

• using the special performance of this material that between its specific resistance and compressive stress there is a corresponding relationship, a new kind of sensor can be made.

  利用这类材料的电阻率与其自身压应力存在一定对应关系的特性，可以制成性能独特的应力自感知水泥基复合材料传感器。

• this paper makes an analysis on the relation of the stress boundary with the critical tangential compressive stress as well as on its influence on critical internal wrinkling.

  本文分析推导了应力分界圆与临界起皱压应力、危险断面径向拉应力之间的关系，以及对临界起皱的影响。

• discussed is parameter selection for compressive stress measurement by barkhousen noise method. and opinion is also given on parameter selection.

  讨论了压应力检测中巴克豪森噪声检测参数的选择并给出一些参数选择的初步意见。

• checking the axial compressive stress of the skirt, deduces that it is stable.

  对裙座所受轴向压应力进行校核，可知裙座满足稳定性条件。

• the research proves that the internal pressure due to the axial compressive stress and the circumferential membrane causes the buckling of the tank wall.

  研究证实：罐壁竖直轴向压应力和由内压（静水和动水压力叠加）所产生的罐壁环向拉应力共同导致罐壁失稳，发生弹塑性屈曲变形；

• meantime, the compressive stress in inner surface of hollow roller by nitrocarburizing is available for improvement of bend fatigue property.

  同时，共渗在空心滚子内表面造成的压应力对改善弯曲疲劳性能有利。

• autogenous curing agent can improve the hydration degree of concrete, reduce the compressive stress which dropping of water in capillary of concrete caused and sensitivity to cracking.

  自养护剂可以提高混凝土胶凝材料的水化程度，降低混凝土内由于水化反应导致的毛细孔水面下降所产生的压应力，减少了微裂缝的产生。