the distribution of transversely induced compressive stresses in the uni-and biaxial diagonal tensile test of square specimen(ybt) is analysed by means of finite element method.

利用有限元法分析方板在单向和双向对角拉伸条件下诱导压应力的变化规律。

at sufficiently high temperatures, these compressive stresses may cause the surface layers to deform.

如果温度足够高，这些压应力会使表层变形。

the compressive stresses and plastic radius are gradually decreased along with the increasing inner head, and the plastic radius may be zero if the inner head increases continually to some extent.

同时，随着内水水头的增大，洞周压应力和塑性半径逐渐减小，直到出现无塑性区；

the stresses in the glenoid fossa were the greatest in the back slope of the articular eminence. the regions of the greater compressive stresses of the mandible were those around the force line.

下颌骨较大压应力区位于力的作用线周围区域，较大拉应力区位于下颌支后部及下颌角附近区域。

the bolt preloading also has important influence on the distributions of compressive stresses of the two gaskets.

螺栓预紧力的大小对垫片压紧应力的大小及分布有重要影响。

the three-dimensional compressive stresses at the middle part of the billet is beneficial to the deformation of the pores.

研究发现，坯料中部的三向压应力最有利于孔洞的变形与闭合。

a tremendous advantage of these vessels is that high compressive stresses are induced during winding. this prestressing greatly reduces the risk of fatigue failure.

这种容器的最大优点是在绕制过程中获得高预压缩应力，显着减少疲劳失效的危险性。

the three loading type are studied and analyzed, and calculated with finite element method for compressive stresses and interlaminar shear stresses distribution on 1-3 face.

本文对这三种加载形式进行了研究和分析，并用有限元素法计算了这三种加载形式在1—3面内的压应力和层剪应力的分布。

compressive stresses and stains are considered negative in sense.

压缩应力和污渍被以为是悲观的意义。

the concrete is subject to high compressive stresses and these are generally greatest when the prestressing is first applied to the concrete.

这种混凝土要承受高的压缩应力，而压缩应力一般在混凝土初次施加预应力时最大。

the experimental results show that the residual compressive stresses existed in the laser hardened case are universal phenomena.

结果表明，激光相变硬化层中的残余压应力是普遍存在的现象。