片语

pitting and crevice corrosion点状腐蚀和缝隙腐蚀

crevice corrosion test缝隙腐蚀试验

Concept of crevice corrosion缝隙腐蚀的概念

crevice corrosion behavior缝隙腐蚀性能

corrosion crevice裂缝腐蚀

fretting corrosion摩擦磨蚀；接触腐蚀

galvanic corrosion接触腐蚀；[化工] 原电池腐蚀；[化学] 电化学腐蚀

Crevice & pitting corrosion裂缝；裂隙

Crevice &pitting corrosion裂缝；裂隙

the Critical Crevice-Corrosion Temperature腐蚀温度

repassivation potential crevice corrosion缝隙腐蚀再钝化电位

英汉例句

• the surrounding factors, such as flow field induced corrosion, crevice corrosion and bimetallic corrosion and phase-change induced corrosion, control the corrosion of well tubulars.

  本文提出了科学合理的油井管腐蚀分类方法，发现流场诱导腐蚀、缝隙腐蚀、电偶腐蚀以及相变诱导腐蚀是控制油井管腐蚀的主要环境因素。

• the kinetics of crevice corrosion and water-line corrosion of these metals and the effects of inhibitors on crevice corrosion and water-line corrosion were studied.

  研究了这些金属的缝隙腐蚀和水线腐蚀的机理，以及添加缓蚀剂对缝隙腐蚀和水线腐蚀的影响。

• the crevice corrosion rate of titanium in the oxidative ferric chloride solution was much less than that in thereductive dilute sulfuric acid solution.

  在氧化性的三氯化铁介质中的缝隙腐蚀速率明显小于还原性稀硫酸介质中的缝隙腐蚀速率。

• fig. 8 shows the relationship between crevice corrosion rate and nitrogen content for a low mn steel, sus316l , with diverse nitrogen content after forming crevices.

  图8表明，在形成缝隙后，不同含氮量的sus316l低锰钢其隙间腐蚀率与含氮量之间的关系。

• the「self-catalysis mechanism」of crevice corrosion of titanium in hot acid nacl solution is proposed according to the experimental results.

  鑒于此，本文用微电极技术原位考察了热酸性氯化钠溶液中的钛缝隙腐蚀行为及其影响因素，提出了其机理。

• all sorts of materials are co-used in aerial structure and contact with each other, so crevice corrosion and galvanic corrosion are important failure forms of aerial structure.

  由于航空结构中各种材料常常接触使用，因而使得电偶腐蚀和缝隙腐蚀成为航空结构的重要失效形式。

• the results indicted that the failure of the stainless steel plates was mainly due to crevice corrosion induced by cl-.

  结果表明，不锈钢板片失效的主要原因是氯离子引起的缝隙腐蚀所致。

• using accelerated chemical and electrochemical corrosion testing methods, the resistance to pitting and crevice corrosion behavior for six stainless steels were evaluated.

  采用化学和电化学加速腐蚀试验方法对6种不锈钢的耐点蚀和缝隙腐蚀性能进行了评价。

• pitting corrosion and crevice corrosion in catalyst deposit zone and corrosion deposit zone can also induce stress corrosion cracking.

  催化剂沉积区和腐蚀产物沉积区产生的点蚀和缝隙腐蚀会诱发应力腐蚀开裂的产生。

• the results indicated the cp ti suffers from heavy crevice corrosion in high temperature than in the normal temperature, but it does not suffer from pitting.

  结果表明工业纯钛在氯化物溶液中易发生严重的缝隙腐蚀，但发生点蚀的可能性不大。

• the crevice corrosion behavior of x70 steel was studied in the ku'erle simulated solution of various hco3- concentrations by using a wedge-shaped crevice model.

  在含有不同浓度hco3-的库尔勒模拟溶液中对x70钢楔形缝隙模拟构型进行缝隙腐蚀实验。

• according to the investigation of the general environmental factor, we can understand the crevice corrosion of stainless steel deeply, and prevent it easily.

  环境综合影响因素的研究为更好的了解及预防不锈钢缝隙腐蚀提供了依据。