英汉例句

• the influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-dds curing system as adhesive.

  采用环氧树脂-dds固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。

• the curing effect of different kind of uf resin in different curing system is different, chemical structure, fe and mechanics properties of cured uf resin is different.

  不同固化体系对不同种类uf树脂的固化效果不同，固化后树脂的结构不同，其力学性能和甲醛释放能力也不同。

• measuring concrete temperature field distribution, law of temperature development of surface concrete and core concrete with ages were used as matching curing system of concrete.

  通过现场实测混凝土的温度场分布，并利用大体积混凝土表面和中心温度的发展规律制定混凝土的匹配养护制度。

• the mechanism and development of free radical-cationic hybrid uv curing system were reviewed.

  本文介绍了自由基-阳离子混杂光固化体系的原理及发展概况。

• the influence of tcy/sulfur curing system on the properties of acm was investigated.

  研究硫化剂tcy/硫黄并用硫化体系对丙烯酸酯橡胶（acm）性能的影响。

• the new formulation was constituted by comparing major material, testing of various curing system and anti-aging system.

  通过主体材料的选择、硫化体系的配合试验及防老体系的优化确定了氯丁橡胶胶料配方。

• the results showed that the effectiveness of conventional curing system or semi efficient curing system was much higher than that of efficient curing system or non sulfur curing system.

  结果表明，采用普通硫化体系、半有效硫化体系的效果明显优于有效硫化体系及无硫黄硫化体系。

• the vulcanizing properties of cb filled iir with sulfur curing system were researched.

  研究了炭黑填充丁基橡胶硫黄硫化体系的硫化特性。

• the effects of the curing system and the amount of pom on properties of nbr/pom blends were studied.

  研究了硫化体系、橡塑比对共混物性能的影响。

• in this paper, research on curing system of vulcanized silicone rubber aging tear strength after impact.

  本文主要研究论述硫化体系对硫化硅橡胶老化后撕裂强度的影响。

• in this paper, the effect of the amount of curing agent (methpa) on the mechanics, heat resistance and electrical properties of e-39d/methpa curing system was discussed.

  探讨了甲基四氢邻苯二甲酸酐（methpa）固化剂用量对双酚a型环氧树脂e-39d力学性能、耐热性能及电气性能的影响。

• the study progress in epoxy resin and curing system for moderate-temperature hot-melt prepreg is reviewed.

  本文综述了中温热熔预浸料用环氧树脂体系，包括国内外基体树脂及固化体系的发展现状；

• the result indicated that curing system and other systems were independence during the foaming process.

  结果表明，固化体系与其他体系在发泡成型中相互独立。

• the influence of acrylonitrile content, kinds of the pe, nbr/pf blending ration, curing system and plasticizer on the properties of the blend was investigated.

  研究了nbr中丙烯腈含量、pf品种、橡塑并用比和硫化体系对共混物性能的影响。

• hybrid uv curing system includes free radical cationic hybrid uv curing system, free radical condensation polymerization system and free radical free radical system.

  混杂光固化体系包括自由基阳离子混杂光固化体系、自由基缩聚混杂体系和自由基自由基混杂体系等。