片语

Cutting maximum speed切割最大速度

cutting rotation speed切削转速

Cutting feed speed切削进给速度

Maximum cutting feed speed最大切削进给速度

equivalent cutting wavy speed等效剪切波速

Cutting Roll Speed刀辊转速

Cutting feeding speed切削进给速度

measure cutting edge speed测量压头速率

英汉例句

• this function can make numerical control system according to the point in the x coordinates, as the diameter of the workpiece calculated value spindle speed, and the cutting speed to be constant.

  该功能可以使数控系统根据刀尖所处的x坐标值，作为工件的直径值来计算主轴转速，使切削速度保持恒定。

• in addition, too much cutting speed and big nozzle height can cause and the increase of the poor incision width.

  另外，过大的切割速度和过大的喷嘴高度都会引起切口上下宽度差的增加。

• the selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.

  选择正确的切削速度对所有金属的切削操作有着重要的经济上的影响。

• fortunately, the correct cutting speed can estimated with reasonable accuracy from tool-life graphs or form the taylor tool life relationship, provided that necessary data are obtainable.

  幸运的是，合适的切削速度可以从刀具寿命表或泰勒刀具寿命关系中以合理的精度评估，证明了必然的数据是可以获得的。

• in order to guarantee the machining surface quality, numerical control lathe generally has constant surface cutting speed control function.

  为了保证加工表面质量，数控车床一般都具有恒表面切削速度控制功能。

• this energy release imbalance, closely related with many process parameters, such as plasma arc compression degree, cutting speed and nozzle to the distance, etc.

  这个能量释放的不平衡，与很多工艺参数密切相关，如等离子弧压缩程度、切割速度及喷嘴到工件的距离等。

• theoretical analysis and experimental results all indicate that cutting depth is increasing with the decreasing of cutting speed and increasing of laser power.

  理论分析和试验结果表明切割深度随着切割速度的减小而增加，随着激光功率的增加而增大。

• the paper processes the function design based on plc programme, and explains the feasibility in practice application taking cutting speed adjustment for example.

  使用基于plc编程语言进行功能设计，并以切割速度调整为例说明其在应用上的可行性。

• increase of cutting ability or slowing down of cutting speed can reduce the kind of lag error.

  增加切割能力或减缓切割速度即可减少这种滞后误差。

• cnc plasma cutting machine, the selection of technological parameters for cutting quality, cutting speed and efficiency, the influence on the effect of cutting is very important.

  等离子数控机切割机工艺参数的选择对切割质量、切割速度和效率等切割效果的影响是至关重要的。

• blade performance is a combination of the material being cut, cutting speed and blade life.

  刀片的性能是被切断的材料组合，切割速度和刀片的生活。

• the selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.

  正确的选择切削速度对所有金属的切割操作成本都有有很大的影响。

• in the end, arc, processing and ground is large diameter conical parts, along the x axis into to, is the same, but the linear cutting speed is constantly changing, the cutting surface quality changes.

  在加工端面、圆弧、圆锥以及蹊径直径相差较大的零件时，沿x轴方向进给时，固然进给速度不变，但切削线速度却不断地变化，导致加工表面质量变化。

• on the premise of cutting quality guarantee, should as far as possible the cutting speed increase.

  在保证切割质量的前提下，应尽可能的提高切割速度。

• so, choose as far as possible to improve the nozzle of small high cutting speed and cutting quality is useful, but the nozzle at low altitude may cause double arc phenomenon.

  所以，选用尽量小的喷嘴高度对提高切割速度和切割质量都是有益的，但是，喷嘴高度过低时可能会引起双弧现象。

• the research indicates it is impossible that cutting speed is improved decuple in accordance with present cutting theory.

  多年研究表明，利用现有的切削理论，已经无法再成十倍的提高切削速度。

• therefore, cutting the purity of oxygen, volume, velocity, and oxygen flow shape on the gas cutting quality and cutting speed has important implications.

  因此，切割氧的纯度、流量、流速和氧流形状对气割质量和切割速度有重要的影响。

• fortunately, the correct cutting speed can be estimated with reasonable accuracy from tool-life graphs or from the taylor tool life relationship, provided that necessary data are obtainable.

  幸好，正确的切割速度可以根据刀具寿命表或者刀具寿命泰勒方程估算出来，并有一定的合理精度，如果在必要的数据都具备的前提下。

• if in the enthalpy increases, reduce the diameter of the jet and increase the gas flow, can often gain faster cutting speed and better cutting quality.

  如果在焓值提高的同时，减小射流的直径并加大气体的流速，往往可以获得更快的切割速度和更好的切割质量。

• it is shown that the diamonds with coatings can enhance the service life of the sawblade and obtain a maximum cutting speed at lower concentration of diamonds.

  结果表明：金刚石镀膜不仅能够提高锯片的切割寿命，而且可以在降低金刚石浓度的情况下达到最大切割速度。

• the relationships between the cutting speed and a incised workpiece of intension, thickness are analyzed.

  通过试验，分析了被切割工件强度和厚度与切割速度之间的关系。