片语

2205 duplex stainless steel双相不锈钢

OOCr22Ni5Mo3N duplex stainless steel型双相不锈钢

00Cr22Ni5Mo3N duplex stainless steelCr22Ni5Mo3N双相不锈钢

Duplex Stainless Steel logo双重不锈钢

duplex cast stainless steel双相铸造不锈钢

duplex stainless steel pipe双相不锈钢管道

S31803 Duplex Phase Stainless Steel双相不锈钢S

duplex phase stainless steel双相不锈钢

duplex stainless steel 2205双相不锈钢

英汉例句

• the progress in the research, small - scale production and technical transfer of new rare earth duplex stainless steel sg52 is presented.

  介绍了新型稀土双相不锈钢sg52的研制、小批量生产、应用及其技术转让等进展情况。

• duplex stainless steel is used in high temperature environments, mixed acid environments, especially for the marine, petroleum, chemical equipment.

  双相不锈钢适用于高温环境，混合酸环境，特别适用于海洋，石油，化工设备。

• the pump is offered in a wide range of materials including duplex stainless steel grades.

  该泵的材质有宽泛的选择，包括双向钢等级。

• because transmitting and processing of natural gas has very strong corrosion to pipes, 2205 duplex stainless steel was selected as pipes materials for oil field.

  新疆油田工程输送和处理的天然气介质腐蚀性很强，因此管道材料选用2205双相不锈钢耐蚀材料。

• optimization of caustic wash process, strengthened monitoring of critical equipment or application of duplex stainless steel or super stainless steel can mitigate the cracking problems.

  优化堿洗工艺、对重点设备加强监测或采用双相不锈钢及超级不锈钢可使腐蚀问题得到缓解。

• titanium-stabilized duplex stainless steel (ti-dss) having the following characteristics.

  具有以下特性的钛稳定的双炼不锈钢。

• for duplex stainless steel thermal cutting shall be limited to the plasma arc method.

  对双相不锈钢进行热切割应该仅限于等离子弧切割方法。

• the influence of different solid solution treatment on the structure and corrosion resistant property of cast duplex stainless steel was investigated.

  研究了不同固溶处理对双相铸造不锈钢的组织及其耐蚀性能的影响。

• the effect of thermal ageing on the magnetic susceptibility of a duplex stainless steel has been studied.

  研究了热时效对副复式不锈钢磁敏感性的影响。

• the influence to corrosion resistant ability of duplex stainless steel (saf2205) after solution treatment to weld joint.

  分析了采用焊后固溶处理对saf2205双相不锈钢耐腐蚀性能的影响。

• the hot deformation behavior of industrial continuous-casted duplex stainless steel 2205 under different temperature and different strain rate was investigated.

  研究了工业连铸双相不锈钢2205在不同温度和应变速率下的热变形过程。

• the research progresses of welding between duplex stainless steel and carbon steel in domestic and abroad are summarized.

  综述了近年来国内外双相不锈钢与碳钢异种金属的焊接研究进展。

• the development and study status of duplex stainless steel were reviewed, and the merits and faults of performance, the influencing factors of phase ratio were analysed.

  阐述了双相不锈钢的发展及研究现状，分析了双相不锈钢性能的优缺点及相比例的影响因素，对双相不锈钢的研究方向做了有价值的探讨。

• duplex stainless steel with the advantages of both austenitic and ferritic stainless steels, widely used in petrochemical, water treatment, paper making machinery and the load-bearing areas of bridge.

  双相不锈钢具有奥氏体和铁素体不锈钢二者之优点，广泛用于石油化工，海水废水处理，造纸机械及承重桥梁等领域。

• duplex stainless steel pipes, saf2205, are widely used in the vital department ofthe national economy, such as chemical industries and offshore applications.

  saf2205双相不锈钢管道广泛地应用于化工、海洋石油平台等国民经济重要部门的建设。

• the effect of the heat treatment on the dual phase scale and corrosion property in the duplex stainless steel 2205 were studied.

  本文在查阅了国内外文献资料的基础上，整理了大量的试验数据，并对双相不锈钢的相比例影响因素进行了分析。

• duplex stainless steel (dss) is more and more widely used in petrochemical industry because of its good mechanical property and partial corrosion resistance property.

  由于双相不锈钢的力学性能与耐局部腐蚀性能优良，在石油加工行业的应用越来越广泛。

• the hot tensile strain process of the microstructure of duplex stainless steel was investigated with high temperature microscope(cslm).

  本文利用共聚焦激光扫描高温显微镜（cslm）等设备对双相不锈钢的高温拉伸微观变形过程进行了研究。

• the weldability of the 2205 duplex stainless steel were investigated and the key welding technique was introduced.

  对2205双相不锈钢的焊接性能进行了研究分析，对材料的焊接技术关键进行了介绍。

• it simply introduced the content control technique for both ferrite and austenite phase in a duplex stainless steel and its corrosion resistance.

  本文简要介绍了双相不锈钢的铁素体和奥氏体两相的控制技术及它的耐腐蚀性能。