片语

beginning of fatigue failure早期疲劳失效

fatigue rupture[力] 疲劳破坏

fatigue and fracture failure疲劳断裂破坏

fatigue failure life疲劳失效寿命

fatigue to failure tester疲劳龟裂试验机

fatigue life failure寿命失效

fatigue fracture[力] 疲劳断裂；疲劳骨折

fatigue failure mode疲劳失效模式

fatigue failure process疲劳破坏过程

fatigue-failure of drill string鉆桿疲劳破坏

Fatigue e failure疲劳失效

英汉例句

• the ultimate fracture surface was also proposed. the calculated alternating stress intensity of the structure confirmed the fatigue failure position ulteriorly.

  对结构交变应力强度的计算进一步确定结构疲劳失效发生的位置。

• reason of condenser cooling tube cracking was hf fatigue failure due to high speed steam flow impacting copper pipe which caused vibration.

  冷却管疲劳断裂的原因是由于高速汽流沖击使铜管产生振动而引起的高周疲劳断裂；

• a new fatigue failure criterion is proposed in. light of modern fracture theory.

  本文以现代断裂理论观点提出了新的疲劳破坏準则。

• the dynamic effects due to vibration should be taken into account by the designer if fatigue failure is to be avoided.

  为了避免弹簧的疲劳破坏，设计者应对弹簧由振动所引起的动力影响加以考虑。

• low cycle multiaxial fatigue failure is the main failure mode of aeroengine compressor disk.

  低循环多轴疲劳失效是航空发动机低压压气机轮盘的主要失效形式。

• aimed at the fatigue failure of electric bike shock absorber, a probabilistic estimation method is put forward.

  针对电动车后避震的疲劳失效损坏，提出疲劳损坏概率估计。

• fatigue failure is a common kind of mechanical parts and structure damage.

  疲劳破坏是机械零件和结构的常见的失效形式。

• in some cases, the continuous distribution model of fatigue failure life and stress amplitude level is more valuable in analyzing the damage of ponogena under complicated stress.

  在某些情况下，如进行复杂应力条件下的疲劳素损伤分布分析，疲劳失效寿命和应力幅水平的连续分布模型更有意义。

• a fatigue failure criterion is presented for unidirectional laminate under complex in plane fatigue loads based on the residual strength degradation model and tsai hill static strength criterion.

  基于唯象的剩余强度衰减模型与蔡-希尔静强度判据，建立单向层合板在任意复杂面内应力作用下的疲劳失效準则。

• the fatigue of steel columns indirectly subjected to crane loading is generally not taken into account. but fatigue failure occurred at the column cap in some workshops.

  间接承受吊车荷载的厂房钢柱，一般不考虑疲劳问题，但是在一些车间的钢柱上却出现了疲劳破坏。

• the goal was to come up with a nanometal that was strong enough, hard enough and 「supple」 enough to resist fatigue failure and wear in advanced applications.

  我们的目标是提供足够强度和硬度，又兼具足够抵御疲破坏的纳米材质，以使其能够与高级应用相借合。

• the fatigue crack growth curve from initial crack size till fatigue failure is simulated step by step.

  循环续循环模拟计算出裂纹从初始长度一直到疲劳破坏的扩展曲线。

• the basic fatigue failure characteristics have been analyzed according to the stress analysis and simulation test under inhomogeneous swallowtail between compressor disk and blade.

  分析了非均匀接触下燕尾形榫头连接的应力状态，并借助于模拟试验，提出了非均匀接触导致疲劳破坏的基本痕迹特征。

• thermal fatigue. a type of fatigue failure wherein the cyclic stresses are introduced by fluctuating thermal stresses.

  一种疲劳失效类型，循环应力是由于交变热应力引起的。

• fatigue failure of metal structural component is a common form of structure collapse, so improving fatigue behavior of metal materials is very important for their usage.

  金属构件的疲劳失效是一种常见的结构破坏形式，改善金属材料的疲劳性能对其使用性能的提高有重要意义。

• the cause of the fatigue failure is analyzed by actual measurement and fem analysis. the reinforcement process methods and the design account for the fatigue failure are presented.

  通过实际测量和有限元计算，分析了产生疲劳破坏的原因，提出了针对这种疲劳破坏的加固处理方法和在设计上应采取的措施。

• but the study on the rolling contact fatigue failure mechanism of super hard material coati-ngs is in grope.

  但是目前对于超硬涂层材料滚动接触疲劳失效机理的研究还处于探索之中。

• fatigue failure results from accumulation of cracks of deformation pro - cess of material.

  疲劳破坏是材料在变形过程中产生的裂纹积累。

• in this paper, multidimensional probability model of random fatigue failure was established and the random simulating formula of failure distribution function was deduced.

  本文建立随机疲劳失效的多维概率模型。论述推导机械零件疲劳失效分布的随机模拟公式。