片语

fatigue resistance indices疲劳抗力指标

flex fatigue-resistance抗挠曲疲劳性

fatigue e resistance疲劳强度

material fatigue resistance材料疲劳性能

hot fatigue resistance热疲劳抗力

fatigue crack resistance疲劳裂纹扩展抗力

Fatigue Fracture Resistance疲劳断裂抗力

fatigue resistance titanium alloy抗疲劳钛合金

bending fatigue resistance弯曲疲劳强度

英汉例句

• the compound beverage preparation of matrimony vine and sea-buckthorn has a notable fatigue resistance action on the mouse.

  枸杞沙棘复合饮料制剂对小鼠具有明显的抗疲劳作用。

• the fatigue resistance of the scarf weld in the end of the vessel is stronger than that of the butt weld.

  其端部斜面焊缝结构的抗疲劳强度比对接焊缝结构高，且不会发生一次性脆性破坏；

• the toughness and porosity of a30 are the best, so that the thermal shock fatigue resistance of the material is improved.

  a30材料韧性最高且孔隙率最大，从而其热震循环疲劳抗力得到改善。

• from the viewpoint of practical production, this paper brings forward some basic methods to reconfirm the initial point of peak load modulation, to improve units' fatigue resistance and so on.

  从生产角度，提出了重新确定机组调峰起点、提高机组工作部件抗疲劳强度等解决问题的基本方法；

• it will achieve greater metabolic and neuromuscular efficiency and better fatigue resistance at this pace.

  在这个配速下，您的身体将具有更强的代谢效率和神经肌肉效率，以及更好的抗疲劳能力。

• the utility model aims at providing a combined hard alloy tappet which has a high fatigue resistance and a large allowable contact stress.

  本实用新型旨在提供一种具有抗疲劳强度高及许用接触应力大的组合 式硬质合金挺柱。

• excellent flex fatigue resistance - excellent uv resistance the excellent definition of the sections with of the extrudes thin.

  优良的电线使抵抗疲劳-优良的紫外线抵抗用优良的定义挤出瘦的区段。

• the results have shown that the blend of cpe with rubber can be used to manufacture 「v」-belt having excellent bending and fatigue resistance and low elongation.

  结果表明，氯化聚乙烯与橡胶并用制造出性能良好具有优良的耐弯曲、耐疲劳、伸长率小的v带。

• objective: to compare the fatigue resistance of vertical fractured teeth after bonding restoration in two different periodontal healing modes.

  目的：比较再植后两种牙周愈合方式下，纵折牙粘结修复后的抗疲劳强度。

• if the deformation, stability, fatigue resistance and other aspects may produce adverse effect.

  如对变形、稳定性、抗疲劳等方面都可能产生不利的作用。

• the effect of following factors on thermal fatigue resistance of gjw50 steel-bonded tungsten carbide, such as, austenitizing temperature, tempering temperature and hardness, has been studied.

  研究了奥氏体化温度，回火温度及硬度对gjw50碳化钨钢结硬质合金热疲劳抗力的影响。

• the mechanism of the good contact fatigue resistance of the alloy was investigated.

  同时，对该合金优良的接触疲劳抗力的来源进行了探讨。

• the fatigue resistance of complicated welded structure subjected to moving vehicle loads needs to be further researched.

  在车辆移动荷载作用下，这种复杂焊接结构的疲劳可靠性有待于进一步研究。

• vortex-induced vibration is limited amplitude response, but it occurs at low wind speed with relative large amplitude, which will affect the strength and fatigue resistance of the structure.

  尽管涡振是一种限幅振动，但由于其发生风速较低，振幅相对较大，会影响结构的强度和疲劳，因此大跨度拱桥的涡振响应研究具有重要的意义。

• the fatigue break down is the main form of die failure. to improve the use life of dies, an approach for increasing fatigue resistance of die material is reviewed.

  疲劳破坏是模具失效的主要形式，为了提高模具的使用寿命，综述了提高模具材料疲劳抗力的多种途径。

• the results indicate that microcrystalline deposit with low phosphorus content has higher hardness, modulus and fatigue resistance than the amorphous deposit with high phosphorus content.

  结果表明，低磷微晶镀层较高磷非晶镀层具有更高的硬度、弹性模量和疲劳抗力；

• with the increase of payload capacity and speed of automobiles, it is required that brake drum material should have high strength, high thermal fatigue resistance and high hardness.

  随着汽车载重和速度的增加，使得所需要的制动鼓材料应当发展成同时具有高强度、高抗热疲劳性和良好的硬度。

• the thermal fatigue resistance cuts down with the thermal cyclic upper temperature rising.

  随热循环上限温度升高，其热疲劳抗力降低。

• high elasticity is the premise of low hardness for top roller, it can improve instantaneous dynamic circularity, extend the time of the elasticity fatigue resistance , improve yarn forming quality .

  胶辊低硬度必须以高弹性为前提，才能提高胶辊瞬时动态圆整度，延长抗弹性疲劳时限，达到稳定、提高纺纱质量的目的。

• with laser cladding co-base alloy coatings, the high temperature hardness and thermal fatigue resistance of h13 hot-working die surface were appreciably increased.

  h13热作模具钢表面经激光熔覆钴基合金后显着提高了模具的高温硬度和热疲劳抗力。

• in addition, thedeformation-induced martensitic transformation and beneficial distribution of the residual stresses may also contribute to the contact fatigue resistance to certain extent.

  此外，形变诱发马氏体相变及残余应力的增加等对接触疲劳抗力的提高，也起一定的作用。