片语

feed flow rate进料流量

feed utilization rate饲料报酬

Feed Conservation Rate饲料转化率

feed removal rate底物去除率

feed-rate word馈给速度字

feed transforming rate饲料牧草转化率

Price Feed Update Rate喂价更新频率

feed translate rate饲料转化率

英汉例句

• for influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.

  在表面粗糙度的影响因素和影响规律方面：主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。

• to improve the efficiency decreased by feed rate in traditional nc program, a nc program optimization system is developed for rough milling process.

  针对传统数控程序中进给速度固定限制加工效率的缺点，开发了面向粗铣加工的数控程序优化系统。

• the technological parameters such as electrolysis current, the rotation speed of grinding wheel and the feed rate etc, have been optimized.

  研究了砂轮转速、进给量等工艺参数对石英玻璃表面粗糙度的影响；

• that gradient further affects the feed rate by cooling the barrel in the location where it's critical to develop solids feeding, solids-bed compaction, and heat to initiate melting.

  通过在某个地方冷却筒体，而这个地方是建立固体喂料、固体床，进而开始熔融的地方，这个梯度就这样进一步影响喂料速率。

• experimental results show that higher efficiency can be accomplished and bigger layer thickness and bigger servo feed rate can be chosen in ued-milling in gas with the aid of ultrasonic vibration.

  实验表明，施加超声振动不仅可以提高铣削加工的材料去除率，还可以较大的分层厚度和伺服进给速度进行加工。

• rotate, pressure of 4th, pressure of 5th and degree of two-section pressure increase with feed rate increasing.

  随着喂料速度升高，扭矩、4区压力、5区压力、两区压力差呈现大致升高的趋势。

• from the model, the effects of the dip angle and feed rate on thrust force are estimated.

  在此基础上，分析比较了进给量、斜面倾角等参数对斜面鉆孔初期受力的影响。

• the influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.

  研究了切削速度和进给量对加工表面粗糙度的影响。

• larger feed rate would lead to larger throughput, and thus there existed a tradeoff between a good de - gossypol result and high throughput obtained.

  喂料速度越大，产量越大，因而实际中脱毒效果与产量间存在如何均衡的问题。

• three layers network topology is adopted. the input variables are water pressure, diameter of orifice, diameter of abrasive particles, flow rate of abrasive and feed rate of cutting head respectively.

  模型采用三层结构，输入变量有水射流压力、水喷嘴直径、磨料粒子粒度（直径）、磨料流量和切割头进给速度。

• in high-speed milling, the geometrical factors of both feed rate and pick feed influence the surface roughness and machining efficiency.

  高速铣削时，进给量和进给间隔不仅是影响加工表面粗糙度的重要几何因素，同时也是影响切削效率的重要因素。

• the interpolation precision is correlated with max feed rate pulse equivalent of cnc cyc of interpolation and output impulse frequency of pulse generator .

  其插补精度与最大进给速度、机床系统的脉沖当量、插补周期，以及脉沖发生器的输出脉沖频率有关。

• in 5, cnc cnc engraving machine feed rate adjusted on-line.

  cnc数控石材雕刻机进给倍率在线调整。

• results of vmd experiments indicate that flux increases when feed temperature, feed rate and vacuum degree increase.

  实验表明，随进料温度、进料流速、冷侧真空度的增大，膜通量增大；

• the influence of depth of grinding, feed rate and circular linear speed of the grinding wheel on the grinding forces with respect to the maximum chip thickness of a single active diamond was analyzed.

  从单颗金刚石最大切削厚度的角度，分析了磨削深度、进给速度和砂轮线速度对磨削力的影响。

• high productive machining i. e. machining with faster production cycle is a comprehensive technology , in which increasing cutting speed and feed rate are merely two components.

  高速加工即以较快生产节拍进行加工，提高切削和进刀速度是其系统技术中的一个环节。

• ciba has developed a nitrite feed rate gauge system for controlling process of continuous diazotization by polar voltage method, and hoechst has developed newly an equipment for continual coupling.

  汽巴公司发明了用极性电压法控制连续重氮化过程中亚硝酸盐加入速度的探测系统，赫斯特公司发明了连续式偶 合装置。

• in the case of turning, d decrease with the increase of the feed rate whereas it is not greatly influenced by the cutting speed.

  车削时，进给量对分形维数的影响较大，而切削速度的影响不明显；

• at the same time the solution of achieving look-ahead when cnc is faced with real-time adjusting of the programmed feed rate override is built.

  同时提出了在指令进给速度实时变化的情况下进给速度的求解方法。

• according to the characteistics of cold ring rolling and the working theory of cold ring rolling mill, four kinds of feed rate design were offered.

  本文论述了径向辗环的塑性变形条件及其特点，分析了瞬时极限压下量，导出了辗压时间、进给速度的计算公式。

• the emulsifier content and feed rate affect latex swelling and shell polymerization by the making a change of latex number and total reaction rate coefficient respectively.

  乳化剂量和加料速率分别通过影响胶粒数和总体反应速率系数而对胶粒溶胀和壳层聚合反应产生影响。

• the hardware and software structure of a cnc system for high feed rate punching ma- chine is introduced.

  介绍了一种沖床高速送料数控系统的硬件和软件结构。