片语

forced feed lubrication system压力润滑系统

Drip feed oil system滴油润滑系统

condensate feed water system凝水

feed drive system进给系统

feed driven system进给驱动系统

feed back system考核制度

feed setting system进给系统

feed heating system给水加热系统

liquid feed feeding system稀饲料喂饲系统

英汉例句

• it is based on the mapping relation of function modules and structure modules that we establish the morphologic matrix on feed system of naval gun.

  再根据功能模块与结构模块的映射关系，建立了舰炮供弹系统的形态学矩阵给出舰炮供弹系统的模块化方案。

• after a brief introduction to the structure of injection moulds, the research situation of cae-based optimization plan for the feed system and cooling system of injection moulds was discussed.

  在简单介绍注射模结构的基础上，对基于cae的注射模浇注系统和冷却系统优化研究概况进行了论述。

• to feed system change in time, reduce network loading and servers computing, data and application programming which is usually visited by user adopt duplicate structure.

  对用户经常访问的数据以及应用程序采用复制式结构，这样可以及时反馈系统变化，减少网络负载及服务器的计算量。

• but first the danish manufacturers also used a small slip and therefore a double feed system seemed more economical.

  但是刚开始时，丹尼斯设备厂仍采用小滑差，所以双馈系统也就比较经济。

• the causes of sh and rh tube explosion and coal feed system jamming in the operating cfbb are analyzed.

  分析循环流化床锅炉运行中出现的高温再热器、二级过热器爆管和给煤系统旋转给料阀经常堵煤等问题。

• the model of mine feed system based on cpn is a good foundation for developing the software simulation platform.

  矿井馈电系统是一种典型的离散事件动态系统。

• vulca together with dilco dilution water feed system is used to prevent the channelling and air entrainment into the stock and to save pumping energy costs when filling the tower.

  vulca和dilco稀释水供应系统用于防止产生沟流和防止将空气混入浆料中，并节约泵送能耗。

• this paper designs a s-band feed system for hpm antenna, which consists of a dual-mode conical horn and a rectangular-circular mode convertor.

  本文设计了一种s波段高功率微波天线的馈源系统，该系统由双模圆锥喇叭和矩-圆模式转换器两部分组成。

• this thesis mainly studies how to design the structure of heavy nc machine tool「s feed system which is developed by qiqihar heavy cnc equipment co.

  本文针对齐齐哈尔重型数控设备股份有限公司的重型数控机床进给系统的结构进行合理化设计，并提出一种快速有效的机床设计方法。

• the design of the linear feed system of an overhead gantry high speed machining center is presented in the paper.

  介绍一种高架桥式高速加工中心直线进给系统的设计。

• the functions of feed are realized through different levels of quality control center. feed system is constructed by means of power electronics, energy storage and information processing technologies.

  指出柔性化供电系统通过不同层次的质量控制中心对电能进行变换和控制 ，feed的构建依赖于电力电子技术、蓄能技术及信息处理与智能控制技术。

• finally the authors prospect the development direction of feed system in high-speed machining.

  最后展望了高速加工中进给系统的发展前景。

• technical innovation is done for feed system of cracking furnace for adapting various feedstocks.

  为适应各种原料，对裂解炉进料系统进行技术改进。

• this paper analyzed ac servo heavy cutting feed system component parts and their actions, and built model about mechanical transmission equipment section.

  分析了强力切削交流伺服进给系统各组成环节及作用，对机械传动装置部分建立了模型。

• machine tool feed system is usually driven by ac servo motor ball screw feed drive to achieve, to simplify the structure.

  机床的进给系统通常是通过交流伺服电机驱动的驱动滚珠丝杠饲料，简化结构，实现。

• high-speed feed system is one of the key technologies for high-speed machine tools.

  高速进给系统是高速加工机床的关键技术之一。

• the experimental results show that this system has reached the goals of control, and the digitized wire feed system can operate reliably with good capability of anti-interference.

  试验结果表明，该控制系统达到了设计的目标，送丝系统运行平稳，抗干扰能力强，可靠性高。

• linear motor driven system is a new kind of feed system for cnc machine tools.

  直线电机进给单元是高速数控机床的一种新型进给系统。

• it is possible for the feed system to have a low impedance, looking downstream from the pressure source at a certain frequency.

  在压力源下游，供应系统在某一频率下可能有一低的阻抗。

• this paper introduces the development of the servo control electronic yarn feed system and analyzes the warp knitting machine」s let-off feedback deflection and the.

  论文详细介绍了伺服控制的经编电子送经系统的开发过程及送经反馈偏差和停车横条与电子送经系统的关系。

• in this paper, the design of planar antenna feed system of high-speed mobile radar and a test method for watertightness are presented.

  论述了高机动雷达平面阵列天线馈电系统的水密性设计及试验方法。