英语释义

• a metal cap or band placed on a wooden pole to prevent splitting

片语

furnexpert ferrule锅炉烟管套圈

double ferrule卡套接口

ferrule detail箭桿金属箍

Ferrule Type卫生型

adjustable ferrule可调夹套

cable ferrule电缆套圈

Ferrule brass费鲁尔铅黄铜

boiler ferrule锅炉烟管套圈

FERRULE COUPLING金属箍接头

英汉例句

• bearing bore or outside the surface and the ferrule end face connected to a ring surface.

  轴承内孔或外表面与套圈一端面连接的套圈表面。

• another ferrule that is used to enclose the wrist and antebrachium is linked to the crossbar of the u-shaped rack through elastic strings.

  一用于腕臂套置的腕臂套圈通过弹力带连接在u形前支架的横桿上。

• using the deform software, the simulation model was established and analyzed, the feasibility and the superiority of the closed type cold rolling with pair taper ferrule were justified.

  运用deform软件建立仿真模型进行模拟分析，对圆锥套圈的成对闭式冷辗扩的可行性和优势进行了验证。

• this paper reports the detailed investigations on the composition, shaping process and material sintering of zirconia ceramic ferrule for pc type of fiber optic connectors.

  本文对陶瓷pc型光纤活动连接器的关键部件二氧化锆插针体的材料配方，材料成型，材料烧结工艺进行了详细的研究。

• the cue tip should be larger in diameter than the ferrule so that it can be properly shaped. make sure the glue is completely dry before shaping.

  粘合上的皮头应该是比先角大上一圈的，待会我们会对它进行切割成型。在切割皮头使其成型前要先确保胶水已经干透。

• objective: to study the clinical effect of dual metal ferrule for on fixed prosthesis in the residual roots and crowns.

  目的：探讨双重金属领圈在残根、残冠修复治疗中的临床效果。

• the thumb ferrule is set outside the ferrule of index finger on the backplate with steel wires.

  拇指套圈通过钢丝安装在掌背护板的食指套圈外侧；

• to investigate the effect of various post and core materials on stress distribution of ferrule effect in post crown, and to evaluate the biomechanics mechanism of ferrule effect in post crown.

  研究桩冠修复中不同桩核材料对箍效应的应力分布影响，探讨箍效应的生物力学机制。

• easy, permanent assembly between the tubing and fittings: push the tubing over the fitting ferrule until the tubing 「clicks」 into place.

  易之间的管材，管件常设大会：推入拟合套圈油管，直到管「点击」到位。

• the purpose of this article is to review the types and designs of the ferrule and to identify the factors that influence the ferrule effect.

  本文就箍结构的类型、设计、作用及影响箍效应相关因素的研究进展作一综述。

• a ferrule type, flareless fitting is provided that may optionally be pulled-up to its assembled condition by torque rather than by turns.

  提供一种套圈式无扩口管接头，该管接头可以通过扭转而不是通过转动随意地接上到它的装配好的位置。

• install the valve onto the copper tube and gently slide compression nut and ferrule up to the valve to engage.

  在铜管上安装阀门，然后轻轻地把压缩螺母和套圈移到阀门上并进行啮合。

• a new complex ferrule fine-blanking technology, combined with the idea of ferrule punching, is introduced in the researching on the pressure rotor and fender ring in this paper.

  本文以油泵增压转子/挡圈为研究对象，结合套沖工艺思想，在精密沖裁中引入复合型精密套沖新工艺。

• tube fittings shall be flare less compression type of three-piece construction consisting of ferrule nut and body suitable for use on ss tubes.

  管道管件应为非扩口压缩式三件构造，由套圈、螺帽和本体组成，适宜安装在不锈钢管道上。

• another ring for the difference between the base-level, allowing the ferrule at the base of the non-standard technology of surface markers.

  为区别另一套圈的基準面，允许在该套圈的的非基準面上标工艺标志。

• the zzx-01 automatic turning product line of taper bearing ferrule has the advantages such as high-precision, high-efficiency, high-reliability and mass-production.

  01圆锥轴承套圈自动车削生产线具有高精度、高效率、高可靠性及可用于大批量生产等优点。

• the ferrule portion is bent along the longitudinal axis to form a bend.

  套圈部分沿着纵向轴线弯曲以形成弯曲部分。

• the ferrule effect is influenced by elastic modulus of post and core materials.

  箍效应受桩核材料弹性模量的影响。

• the relative transverse positioning of the ferrules in an abutting relation is determined by the position and shape of the tubular portion and its engagement with the ferrule outer walls.

  的相对冷压头横向定位在毗邻的关系取决于位置和形状的管状部分，并与套圈外墻进行接触。

• the complete story of why the center of my ferrule has no black nickel on it would take pages to explain.

  为什么在我的金属箍的中间部分没有黑镍，光这个问题，就得用上好多页纸才能回答清楚。

• an outer sleeve is present defining a tubular portion for snug contact with the ferrule outer walls while the ferrules are in end-abutting relation.

  一个外套存在界定合身与套圈外墻联系，而冷压头是最终毗邻关系一管状部分。

• the ferrule portion includes a cylindrical wall, a first end, a second end, a longitudinal axis and a stress relief aperture.

  套圈部分包 括圆筒形壁、第一端、第二端、纵向轴线和应力释放孔。

• of roots at the top and the much-scratched metal ferrule and spike at the base.

  根顶部和急需抓伤的金属箍和扣球的基础。

• an infrared ray burner includes an upper combustion layer ceramic plate, a lower combustion layer metallic plate, a shell, a ferrule and a wire netting.

  一种红外线燃烧器，包括：上燃烧层陶瓷板、下燃烧层金属板、外壳、金属箍、金属网。

• it is found that the results of finite element method are close to the experiment values because the ferrule deformation and boundary condition are considered.

  研究表明：由于有限元法考虑套圈变形以及边界条件的影响，与实验结果更为接近。

相似词

shoe(Shoe)人名；(英)休