英语释义

• wallboard composed of wood chips or shavings bonded together with resin and compressed into rigid sheets

片语

fiberboard production纤维板生产

fiberboard property纤维板性能

gypsum fiberboard石膏纤维板

resilient fiberboard弹性纤维板

soft fiberboard软纤维板

beaverboard纤维板，纤维制天花板

fibre board[木] 纤维板

hard fiberboard制纤维板

aluminum fiberboard铝纤维板

Corrugated fiberboard瓦楞纸板

relief fiberboard浮雕纤维板

英汉例句

• The author discussed the effect of moisture content of mat, treatment of mat and pressure curve of wet-process S-2-S fiberboard on their properties.

  本文研讨了板坯含水率、板坯处理和热压曲线等因素对湿法两面光纤维板性能的影响。

• Though a serious tests, characters of tobacco-stem fiber are studied, process for preparing tobacco-stem binderless fiberboard is developed and optimum process parameters are obtained.

  通过试验分析了烟秆纤维的特征，开发了烟秆无胶纤维板制备工艺并得出优化工艺参数。

• Materials such as untreated fiberboard or wood shall not be in direct contact with metal surfaces.

  材料，诸如未经过处理的纤维板和木材不能直接和金属接触。

• A new technology of finishing the fiberboard surface with powder coating and transfer printing.

  研究一种在纤维板表面进行粉末涂装再转移印花的新工艺。

• In resent years, medium density fiberboard industry in Yunnan is developing rapidly, but at the same time, some problems have arisen.

  近年来，云南中密度纤维板工业发展迅速，但同时暴露出一系列问题。

• In order to reduce the serious environmental pollution from fiberboard production by wet process, utilization of fiberboard wastewater for production of fodder yeast was studied.

  为了减轻湿法纤维板生产废水对环境的严重污染，进行了利用其废水生产饲料酵母的研究。

• Illustrating how to design medium density fiberboard production line to save energy and control the production cost.

  以实例介绍中密度纤维板生产线设计环节的节能降耗措施。

• The development of thin high-density fiberboard which made of mix material Populus and Pinus massonia was studied in the paper.

  研制以意杨、马尾松混合材为原料生产地板用薄型高密度纤维板。

• The changes and stability of ROS of three kinds of laccase-treated wood, the correlation between the change of ROS concentration and IB of fiberboard were measured and discussed.

  研究了不同处理条件下两种漆酶处理三种木材后的ROS变化规律、ROS的稳定性，ROS浓度变化与纤维板IB的相关性。

• The influence degree of furniture material to breaking bending moment and rigid efficiency in bamboo glue-laminated panel is bigger than those in medium density fiberboard and particleboard orderly.

  基材对接合点的破坏弯矩、刚性效率影响较大，两个性能指标的值由大到小依次为竹集成材、中密度纤维板和刨花板。

• The paper studied the reaction mechanism of self bonding in dry process binderless fiberboard manufacture by investigating the chemical composition and conversion of wood.

  通过干法无胶纤维板制造过程中对木材化学成分的转化和含量变化的研究，探讨了干法无胶纤维板的粘合机理。

• A rigid board made of layers of fiberboard or paper bonded to a gypsum plaster core, used instead of plaster or wood panels in construction to form walls.

  石膏灰泥板，灰胶纸柏板由石膏灰泥作芯板结合几层纤维板或纸浆板制成的硬板，在建筑中用于代替灰泥或木板来建造墻壁。

• The floor and the built-in furniture are made of medium-density fiberboard and given a paint finish.

  地板和嵌入式的家具使用了中密度纤维板。

• The domestic and overseas research works of waterproof performance of vegetal fiber and gypsum board are introduced. The features of waterproof of vegetal fiberboard based on gypsum are described.

  总结了国内外有关石膏与植物纤维耐水性研究工作的现状，阐释了石膏基植物纤维板耐水方面的应用特点。

• Rising demand for UV-cured powder coatings from the furniture industry for use in medium-density fiberboard (MDF) applications is propelling market growth.

  全球紫外线 （UV） 硬化型粉末涂料的市场，由于家具产业上MDF （中密度纤维板）需求的增加，整体有扩大趋势。

• Based on fuzzy control theory, the paper analyzed the principle and method to establish fuzzy Controlling model of fiberboard hot pressing machine, and discussed it's application.

  基于模糊控制理论，论述了纤维板热压机模糊控制模型的建立原理及其方法，并给出应用实例。

• From the fast development of the fiberboard industry and the questions of actual production, this paper give reasons for the poor dimension stability on fiberboard.

  结合当前纤维板工业迅速发展的实际情况和生产中存在的问题，阐述了纤维板尺寸稳定性差的原因。

• In the course of operation, pus liquid, clot as well as necrosis tissues were cleared and visceral fiberboard on the lung surface was stripped to make the compressed lung fully expanded.

  术中清除脓液，脓块及坏死组织，剥除肺表面的脏层纤维板，使被压缩的肺组织充分膨胀。

• Avoid using paper wrappers on fiberboard containers.

  避免纤维板容器上的包装纸。

• A brief description is given for various newly developed technology in the production of particleboard and medium density fiberboard in the last 10 years.

  简要叙述近10年来刨花板、中密度纤维板生产中涌现出来的各种新技术。

• A coated article which includes a cement fiberboard substrate and a radiation - curable nonaqueous coating system applied to the substrate.

  本发明涉及一种被涂制品，其包含水泥纤维板基材和涂覆到该基材上的可辐射固化的非水性涂层体系。

• The influence of bagasse materials on quality of medium density fiberboard was studied through analyzing the morphological characteristics and chemical composition of fiber.

  从纤维形态、化学组成两个方面分析了蔗渣原料对中密度纤维板质量的影响。

• Humidifying treatment of medium density fiberboard (MDF) mat is for the purpose of shortening hot pressing cycle, reducing thickness of pre cured layer and raising quality of MDF.

  中密度纤维板板坯表面增湿处理旨在缩短热压周期、减少预固化层厚度、提高产品质量。

• Medium density fiberboard (MDF) is a very popular substrate. MDF is made by converting wood chips into fibers.

  中等密度纤维板也是非常受欢迎的标识制作材料，它是由木屑转变成纤维做成的。