片语

flow channel optimization流道优化

flow passage流道；通流部分；液流通道

flow board channel液流通路

drag flow along channel沿螺槽推进流

overland flow and channel flow坡面和沟道水流

fluid flow on channel流道流场

flow measurement channel量水槽

flow returning channel水流归槽

flow of channel渠道流

aerated spiral-flow grit channel曝气螺流沉沙槽

英汉例句

• Water discharging in the cathode of PEMFC with single straight flow channel was studied by visualization method.

  采用可视化方法研究了直条单流道质子交换膜燃料电池(P EMFC)阴极排水过程。

• Alternatively, the fluid reservoir (100) can be formed from flexible polymer materials that are bonded along seams (118) to demarcate a flow channel (102).

  作为选择，流体贮存器(100)可以由柔性聚合物材料构成，所述柔性聚合物材料沿着接缝(118)结合以划分流道(102)。

• For the low porosity and permeability reservoir of Shi Wu Oilfield, fracture is the main flow channel of oil and gas. So it is essential to do a comprehensive research on the fracture.

  对于十屋油田营城组低孔低渗储层，裂缝是油气的主要渗流通道，所以有必要对裂缝进行全面的研究。

• The fluid model selection is discussed from the examples in the hemorheology studies using flow channel technique.

  本文将结合流动渠道技术的应用实践，对流动渠道中的血流动力学问题进行讨论。

• Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.

  成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。

• Using the theory of compensation effect between compress ratio and the length of straight section, the pressure of flow channel were mainly study according its influence on melt line.

  利用压缩比与平直段的长度存在补偿效应的结论，从压力分布及压力降的比较中考察其对熔接痕形成的影响。

• Therefore, the study of scupper flow channel whether steel liner as well as different steel liner thickness on the impact of orifice stress is necessary.

  因此研究泄水孔流道有无钢衬以及不同钢衬厚度对孔口应力的影响很有必要。

• The influence of fuel cell performance with various flow channel design were studied.

  比较了不同流道设计对电池性能的影响。

• Use CFD software, the area of flow channel for forward skewed and backward skewed impeller was analyzed, and the differences in the performance of pressure between them was got.

  利用CFD软件分别对前向和后向叶轮旋涡风机的单个叶道进行流场分析，得到前向和后向叶轮单个叶道的压力性能差异。

• Under these conditions, particles slide on themselves rather than the hopper walls, and an internal flow channel develops.

  在这些条件下，粒子不是沿着料斗壁面滑动，而是沿着粒子之间的壁面滑动，这样一个内部通道就形成了。

• Because the water pressure in spring assembly and valve body makes the conical compression core and seat seal automatically, the flow channel of valve is closed.

  因弹簧总成和阀体中水流压力将锥形压芯和锥形压座自动压合密封，阀体水流通道关闭。

• Objective To construct and numerically simulate the flow channel to simulate the blood flow features of the susceptible sites of atherosclerosis in vitro.

  目的构建动脉粥样硬化好发部位复杂血液流动状态的体外模型，并数值模拟。

• Good reservoir mainly includes sublacustrine fan-in-fan braided channel sand body and axial gravity flow channel sand body.

  好的储集体主要有湖底扇中扇辫状水道砂体和轴向重力流水道砂体。

• The main reservoir space of fractured reservoir are dissolved pores, karst cave and fracture. At the same time, fracture is the flow channel of fluid.

  裂缝性储层以溶孔、溶洞及裂缝为主要储集空间，同时，裂缝又是流体的渗流通道。

• It has advantages such as reasonable flow channel structure; low pressure drop; high processing ability, high mass transfer efficiency, good design flexibility and wide applicability.

  它的特点是流道结构合理，阻力降小，处理能力大，传质效率高，设计弹性大，适用范围广。

• Methods: a system with flow channel technique and light transmission measurements were applied to gaining red blood cell aggregation curve.

  方法：利用平面流动渠道系统用光学测量方法获取红细胞聚集曲线，并用倒置显微镜进行同步显微摄影。

• The results showed that the actual jet angle was larger than the outlet flow channel angle of deflector plate.

  结果表明，实际射流出射角略大于喷盘流道出射角。

• Objective: to study the relation between of forming time red blood cell aggregation body and structure by changing the thickness of flow channel plane and red blood cell hematocrit.

  目的：通过改变流动渠道平面层的厚度和红细胞压积来研究红细胞聚集体的形成时间与聚集体结构的相互关系。

• After calculating the flow field of the pyramidal, the relationship between energy loss, noise and the structure of the valve has been analyzed; the flow channel has been optimized.

  应用有限元方法对液压锥阀流场进行数值预报，分析其能量损失，噪声和流场结构的关系，并在此基础上对流道结构进行优化设计。

• As the filling of mercury in the knaggy pore space made the pore flow channel more uniform, the fractal factor in the mercury ejection process is smaller than that of mercury injection process.

  由于压汞过程中的汞对孔隙凸凹的填充，使得孔隙流通通道均匀化，因此和压汞过程相比，退汞过程的分形结构因子普遍较小，即退汞流动通道的均质性增强。