英汉例句

• the flow stress remains a conant during steady state deformation.

  稳态流变阶段，流变应力基本保持不变；

• the flow stress decreases with the increase of deforming temperature and increases with the increase of strain rate.

  流变应力随着变形速率的增加而增加，随着变形温度的升高而降低。

• effect of strain rates on peak flow stress is relate to deformation temperature.

  应变速率对峰值应力的影响与变形温度有关。

• based on the crystal plasticity theory and mathematical theory of statistics, the relation of flow stress fluctuation quantity to grain dimension as well as billet dimensions was built.

  基于晶体塑性理论及数理统计理论，建立了流动应力波动幅度与晶粒尺寸和坯料几何尺寸间的关系。

• simulation experiment results revealed that this model could correctly recur to the flow stress in the sample data and accurately predict the non-sample data.

  仿真实验结果表明，该组合方法不仅能够重现样本数据的变形抗力，还能非常精确地预测非样本数据。

• at the same time, the hawp solutions appeared strong flow stress and obvious shear thinning phenomenon.

  同时，溶液表现出明显的屈服应力和良好的剪切稀释性。

• the influences of softening modulus and elastic modulus on local damage variable rate depend on the flow stress level.

  降模量及弹性模量对局部损伤变量率的影响取决于流动应力的大小。

• the flow stress decreases and the elongation increases with the decrease of stress rate .

  随着拉伸速度的减小，合金的流变应力减小，延伸率增大。

• based on the actual steel grade of production, the flow stress is measured under rolling condition, and the mathematical models are obtained.

  以现场的钢种为样本，测定热轧条件下的流动应力，建立流动应力模型。

• during the isothermal constant strain rate compression process, the effect of deformation heating on flow stress increases with increasing equivalent strain rate.

  在等温恒应变速率压缩过程中，随着等效应变速率的增大，变形热效应对流动应力的影响程度增大。

• the variation of mean flow stress of two kinds of low carbon steel rolled in angang 1780 finishing mill were analyzed.

  本文分析了鞍钢1780生产的两种低碳钢在热连轧过程中平均流变应力的变化。

• true strain, strain rates and temperatures were input parameters of the model, while flow stress was the only output parameter.

  在该模型中，等效应变、等效应变速率和变形温度是模型的输入向量，输出向量是材料的流动应力。

• for assessing reliability of a pressure piping containing defects, it is necessary to know the calculation method and the distributions of flow stress of material.

  确定管道流变应力的不确定性分布是对含缺陷压力管道进行可靠性评定的前提。

• the flow stress decreased with the decrease of density.

  此外，塑性流动应力随着密度的降低而下降。

• the apparent activation energy for hot deformation and the hot deformation equation in ferrite for the steel are determined according to the flow stress curve.

  根据流变应力曲线，确定了试验低碳钢铁素体区的热变形激活能和热变形方程。

• the influences of deformation temperature, deformation rate and deformation degree on the flow stress and grain size are different. the deformation degree mainly influences the shape of flow curves.

  结果表明：变形温度、变形速率和变形程度对流动应力和再结晶晶粒尺寸均有不同程度的影响。

• the simulating software can be used not only to analyze the dependency of the rolling load on flow stress models, but also the dependency of the rolling road on thermal transfer models.

  采用该模拟软件，可对流动应力模型影响轧制力的程度进行分析，也可对传热模型影响轧制力的程度进行分析。

• in the method, the flow stress of material is taken as a function of strain accumulation, strain rate and temperature.

  在该方法中，材料的流动应力取为应变总量、应变速率和温度的函数，推导了包含这种函数关系的本构矩阵。

• the flow stress of 7a60 ultra high strength aluminum alloy was studied by isothermal compress test at constant strain rate.

  采用等温恒应变速率压缩试验对7a60超高强度铝合金的流动应力进行了研究。

• based on the isothermal constant strain-rate compression tests, the flow stress of a ultra high strength aluminum alloy was researched.

  采用等温恒应变速率压缩试验对超高强度铝合金的流动应力规律进行了研究。

• the results showed that the flow stress of this alloy reduced with increasing deform temperature and increased with increasing strain rate.

  试验结果表明，该合金流动应力随着变形温度的升高而下降，随着应变速率的增加而增加。

• under the same deforming quantity, the flow stress appears a obvious fluctuation.

  在相同变形量下，流动应力呈现出明显波动；

• it is demonstrated that the formula is suitable for the flow stress obtained from experiment.

  试验结果表明，该模型适用于镁合金热变形过程的流变应力分析。

• in order to study the scale effect of flow stress fluctuation, micro copper cylinders with different grain size were compressed at room temperature.

  通过对常温下具有不同晶粒直径的微型铜圆柱体进行镦粗实验，研究了微小尺度下流动应力波动尺度效应现象。

• a common method for the measurement of flow stress curves to determine the constitutive equation is the axisymmetric compression test.

  通过不同变形参数下的轴对称压缩实验获取材料流动应力曲线，是建立本构关系的常用方法。