full penetration中文,full penetration的意思,full penetration翻译及用法

2026-04-13 06:44 浏览次数 14

full penetration

英[ful ˌpenɪˈtreɪʃən]美[fʊl ˌpɛnɪˈtreʃən]

全熔透;焊透

full penetration 片语

片语

full penetration weld全焊透

Full heat penetration test满载热穿透试验

full rubber penetration全橡胶渗透性

full penetration corner joint翻译

laser full-penetration welding激光熔透焊接

full-penetration weld poolTIG熔透熔池

laser full-penetration激光穿透

weld penetration焊透深度;焊接渗透;焊透

full penetration butt weld满对接焊

full penetration 例句

英汉例句

  • high brightness, full penetration rate; used for bottom diffusion of backlit under lcd.

    辉度高,全透过率高;用于lcd背光源下扩散。

  • the fillet welds have been accomplished according to requirements of leg-connection welding, but now, acceptance check on them is based on requirements of full penetration fillet welding…

    角焊缝我们按贴脚焊缝生产完毕,如今却按角焊缝融透要求来验收,…

  • the weld can performed free of porosity for full penetration weld when proper surface treatment processing prior to welding is employed.

    采用合理的焊前表面处理工艺、全熔透焊接可获得无气孔的焊缝。

  • all welds shall be full penetration and continuous unless otherwise specified on the drawing.

    除非图上另外标明,所有焊缝均为连续全焊透焊接。

  • however full penetration welds, to restore the mechanical resistance of the parts connected and if not specifically indicated on the drawings, to be performed in continuous.

    然而用来修复相连部件的机械阻力的全溶焊接,如在图纸上无特别说明,则可继续执行操作。

  • butt welded joints shall be of full penetration type generally with or without special provision for a high quality of root side.

    不管有或没有特别的要求,对接焊为了达到高质量的焊根就应当全焊透。

  • a vision control system of full penetration with a structured-light three dimensional vision sensor has been developed by the authors.

    在作者研制的熔透视觉控制系统中,结构光三维视觉传感器具有不作旋转运动和目标范围小的特点。

  • the three-dimensional temperature fields for both the full penetration mode and partial penetration mode in ebw of gh4133 superalloy are performed using a commercial fem code, ansys.

    进而利用a nsys通用有限元软件,对镍基高温合金gh4133电子束焊的完全穿透和部分穿透焊接温度场进行了三维数值模拟,分析中考虑了辐射换热和温度相关材料性能的影响。

  • by comparing backgouging of plasma arc with carbon arc to the welded joint of 13-5 martensitic stainless steel, the backgouging of plasma arc is proved feasible for the full penetration weld.

    通过对13-5型马氏体不锈钢焊接接头进行等离子弧清根及碳弧气刨清根的比较,证明等离子弧清根对全焊透焊缝实施背面清根是可行的。

相关热词