片语

heat-setting vresin快干树脂

heat-setting dye热固性染料

relaxation heat-setting松弛热定型

heat-setting machines热定型机

second heat-setting二次热定型

heat-setting time热定型时间

heat of setting硬结热

heat-setting refractory热固性耐火材料

heat-setting property热凝固性

英汉例句

• effects of two components「 melt index, spinning temperature, lateral blowing, drawing ratio, crimping and heat setting on fiber quality and properties are discussed.

  讨论了两种切片的熔融指数、纺丝温度、侧吹风、后拉伸倍数、卷曲、松弛定型工艺对产品质量及性能的影响。

• it is found that when the heat setting temperatures increase, the elastic recovery percentage shows a minimum at certain temperature.

  发现丙纶的回弹率随热定型温度的增加，在某一温度下出现极小值；

• heat setting is an essential step in the finishing process for man -made fibers.

  对于人造纤维来说，热定形是整理过程是一个重要工序。

• the significance of life cycle costs of heat setting machines within the framework of carpet yarn production is described.

  描述了地毯丝生产工艺中热定型机使用期成本的重要性。

• the influences of heat setting conditions on the structure of pac fibres investigated from several approaches like thermal swelling retractions, x-ray diffraction and studies of mechanical properties.

  本文从热溶胀收缩，x-光衍射和机械性质几个方面，观察热处理条件对丙烯腈三元共聚纤维（pac纤维）聚集态结构的影响。

• relation between degree of crimp, crimp contraction and the structure of pbt/pet side-by-side composite fiber under different heat setting and texturing conditions is studied.

  本文研究了pbt/pet并列型复合纤维在不同的松弛热定型和假捻变形工艺条件下，纤维卷曲度、卷曲收缩性能以及纤维结构之间的关系。

• this copolymer exhibited good spinnability during melt spinning, and the resulted fiber had better heat setting effect at 120℃ than at 160℃.

  将共聚物熔融纺丝，可纺性较好，纤维在120℃较160℃热定型效果好。

• in this paper, the characteristics and selection of flat screen printing machine, rotary screen printing machine, stentering and heat setting dryer, open width washing machine were all introduced.

  介绍平网和圆网印花机，以及拉幅、热定形、烘燥机和平幅水洗机的基本特性及其选择。

• the key technique of pla fibre, bamboo fibre, soybean fibre, ptt fibre in terms of the pretreatment, dyeing, heat setting and aftertreatment were analyzed.

  并对部分纺织新材料，如聚乳酸纤维（pla）、竹纤维、大豆蛋白纤维和聚对苯二甲酸丙二醇酯（ptt）纤维的前处理、染色、热定形、后整理等关键技术作了综述分析。

• based on production experiments, the heat setting process of two-way elastic lace and its adjustment are analyzed.

  通过试验，探讨了四面弹力网花边的定形工艺及调节方法。

• the factors affecting the crimpability of pan staple fiber include the overall denier of tows, crimp box height, crimping pressure and temperature, tow tension and width and heat setting temperature.

  影响腈纶短纤维卷曲性能的主要因素有丝束总线密度，卷曲箱高度，卷曲压力温度，丝束张力，宽度及热定型温度。

• the effect of heat setting conditions on the elastic resilience of ipp fibers has been investigated. the elastic resilience compares with other mechanical properties.

  作者研究了热定型条件对丙纶弹性回复率的影响，并将回弹率与纤维的其它力学性质作了对比。

• high temperature grease specialized for heat setting machine.

  热定型机专用高温润滑脂。

• two-way elastic lace is one of the most sensitive fabrics, and is very strict with its treatment conditions, especially for the heat setting process.

  四面弹力网花边属于敏感性织物，加工条件要求严格，尤其定形整理具有较高的难度。

• therefore the heat setting process and its influences on the alkali weight reduction rate is studied.

  因而本文对海岛丝织物热定型工艺及其对减量率的影响进行了研究。

• the paper discussed the high shrinkage pet fiber in the respect of its heat shrinkage, heat setting and dying, which are considered to be advantageous for textile processing.

  本文从热收缩、定型及染色性能等方面对高收缩涤纶长丝进行了探讨，认为其特性有利于纺织加工，为其大规模应用于生产提供借鑒。

• it is difficult to control the winder of heat setting machine if the tapered tension control is needed.

  热定型机末道收卷如果有张力锥度控制的要求，一般解决办法比较困难。

• the major reason for heat setting is to give dimensional stability and shape to cloth made from these fibers.

  热定形的目的是使由这些纤维制成的织物具有一定的尺寸稳定性和一定的形状。

• this article analyses influence of heat setting process on abradability and air permeability of batt-on-mesh needled felt.

  分析热定型工艺对底网针刺植绒毛毯耐磨性和透气性等的影响。

• suitable for monforts heat setting stenter (germany), monforts fong」s stenter.

  德国门富士热定型机、立信门富士定型机。

• alkali scouring in cold pad-batch and heat setting process of blended fabrics containing moisture management polyester was carried out respectively and the changes of textile properties were measured.

  对含吸湿排汗涤纶纤维的混纺面料分别进行堿冷轧堆精练和热定形加工处理，测试其性能变化。

• the structure and operation characteristics of chain plate type relaxation heat setting machine were analyzed.

  分析了链板式松弛热定型机的结构及运行特点；

• starting with the investigation of heat setting process, the dyeing properties of the disperse dyeable modified pet under atmospheric pressure are researched.

  本文从热定形工艺的研究入手，深入研究了分散常压可染改性涤纶的染色特性。

• heat setting device is equipped with a heating device shaped pool, setting the temperature about 98 ℃.

  热定型装置为装有加热装置的定型池，定型温度约为98℃。

• the relations between the technologies of heat setting and thermosol dyeability is investigated.

  本文对含涤纶织物热定形工艺和热溶染色性能的关系进行了研究。