A kind of waste heat treated low alloyed cast iron for making grinding ball in a coal grinder was studied.

研究了一种可用沖天炉生产的煤粉磨机磨球用低合金余热淬火耐磨铸铁。

LY12 duralumin was heat treated on a trial basis and the variation of microstructure and mechanical properties with heat treatment process was obtained.

对LY 12硬铝合金进行了热处理工艺试验，获得了该合金热处理工艺与力学性能之间的关系。

If a CroMo frame is not heat treated after welding, the joints subjected to heat during the welding process are annealed or normalized.

如果CroMo框架焊后不热处理，关节受高温焊接过程中退火或正常化。

These methods and systems are suitable for use in various oxidation processes for the coloration of heat treated steel, for example razor blade steel.

这些方法和系统适用于各种用于对热处理钢例如剃刀刀片钢着色的氧化工艺。

The regularity of the microstructure evolution during the alloy heat treated at different conditions is investigated by the analysis of finite element method.

利用有限元方法对热处理期间的组织演化进行了分析；

You can form light-alloy sheet in either its as received condition or heat treated condition.

可以在收货状态或热处理状态下对轻质合金薄板进行成形操作。

The quality control of parts heat treated in the sealed box furnace is a system engineering, including design, control system of the furnace and heat treatment process as well as operating.

密封箱式炉热处理零件的质量控制是一个系统工程，包括炉子结构、炉子控制系统、热处理工艺以及操作，其中一个环节出问题都将影响热处理零件质量。

The crankshaft is a one-piece casting or forging of heat treated alloy steel of considerable mechanical strength.

曲轴是由合金钢铸造或锻造，经过热处理，具有一定的机械强度的整体结构。

The influence of the heat treated temperature, time and spin speed for the films structure and morphologies were studied.

研究了不同热处理温度、热处理时间及不同旋转速度对薄膜形态和结构的影响。

A full tang generally implies a tough and durable sword or knife hilt, provided the steel has been properly heat treated and is not too hard (the harder it is, the more brittle it is).

全通式柄舌通常意味着刀剑或匕首的手柄坚韧耐用，只要钢材进行过适当的热处理且不太坚硬(越硬则越脆)。

The mixing shaft is heat treated and the main wearing parts are alloy anti-friction materials, which make it long service life but cost low.

搅拌轴经热工处理，主要易损件为合金耐磨材料，经久耐用、费用低廉。

The martensitic steel 15 was heat treated under high pressure in the CS-IB type hexahedron anvils press. The Vickers hardness of the sample was measured.

对原始组织为马氏体的冷轧15钢在CS- IB型六面顶压机上进行了高压热处理，测量试样的维氏硬度。

Heavy haul and high speed railways require high strength, tough rail heat treated rails.

简述了重载、速铁路运输需要高强韧性钢轨——全长热处理钢轨的必要性。

The compression strength of heat treated amorphous alloy is decreased remarkably due to the occurrence of precipitated phase or crystallization phase in the amorphous alloy.

热处理后，当非晶合金中出现分离相或晶化析出相时，压缩强度将急剧下降。

As the hardness requirement increase, the heat treated steels should be considered, with the least expensive steel that satisfies the strength and wear requirements being.

作为对特殊热处理钢材讨论的总结，设计师应当在未经热处理的低表面硬度材料能够满足使用要求时，使用不经过特殊热处理的碳钢或合金钢。

All blood products are now heat treated to kill off any infection.

目前所有血液制品均经过热处理，以防止各种感染。

Do not use raw or soft-boiled eggs in food preparations that will not be heat treated or cooked.

在不加热处理或烹煮的食物制品中不使用生蛋或水煮嫩蛋。

The specimen shall be transverse, using dimensions less than standard if necessary, and shall be prepared from a wafer heat treated with the material to be delivered.

试样应当横向取，如果必要，尺寸可以低于标準要求。试样应当从与发运材料一同热处理的圆盘中取样。

The heat treated yogurt has a longer shelf life but it does not give the nutritional benefits like the yogurt with live cultures because heat processing destroys the cultures.

经过加热处理的酸奶拥有较长的货架期，但是它不能像拥有活性益生菌群的酸奶一样提供营养，这是因为加热加工过程破坏摧毁了（酸奶中原有的）益生菌群。

In this paper, the strengthening mechanism of TZM alloy was investigated. The alloy was processed, heat treated and examined by metallographic observations, phase analysis and electron probe.

本研究工作用加工、热处理、金相观察、相分析和电子探针等方法，研究了TZM合金的强化机制。

The fabricated vessel shall be post-weld heat treated as a whole in an enclosed furnace whenever possible.

只要有可能，制造的容器应在一个封闭炉中进行整体焊后热处理。

The research describes the formation of Widmanstatten structure and martensite in iron-carbon alloys possessing a broad range of carbon contents and heat treated using a broad range of cooling rates.

该项研究描述了铁碳合金中魏氏组织和马氏体的形成，所用合金具有宽的碳含量范围，热处理时采用的冷却速率范围也是宽的。