holding time中文,holding time的意思,holding time翻译及用法

2026-04-13 10:02 浏览次数 16

holding time

保持时间;[通信] 占用时间

holding time 例句

英汉例句

  • The only simple way to do it is to hold the transaction open for the entire process, which lengthens the lock holding time at both the sending and receiving ends and reduces system throughput.

    唯一的简单方法就是保持事务对整个过程的开放,这样就同时延长了发送端和接受端的锁定保持时间,降低了系统吞吐量。

  • The annealing process was made under different temperature and holding time to the cold forging AZ31 magnesium alloy with different deformation ratio.

    对不同变形量的冷锻az31镁合金在不同温度和保温时间下进行退火。

  • In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.

    研究了白云石的煅烧温度、保温时间以及掺量等对水泥物理性能和膨胀行为的影响规律。

  • The influence of some factors, for instance, liquid aluminium temperature, holding time and pressure, etc., upon the manufacturing process is discussed.

    讨论了铝液温度、保温时间和压力等因素对制造过程的影响。

  • The casting after cast can be fast cooled by the device, the holding time of the casting can be effectively shortened.

    采用本装置对浇注后的铸件进行快速冷却,有效缩短了铸件的保温时间。

  • Effect to coating by the heating temperature and holding time were analysed.

    分析了加热温度和保温时间对涂料保护效果的影响。

  • A longer holding time of ultrasonic wave causes a horizontal localized shear region.

    超声时间的延长在金丝球内产生水平剪切层。

  • This paper describes the significance and role of the initial test load holding time in the tensile stress relaxation test at room temperature for the pre-stressed rolled steel.

    本文探讨了预应力钢材常温拉伸应力松弛试验中,初始试验力保持时间的意义与作用。

  • The processing parameters of PEEK composites include cooling rate, forming pressure, forming temperature and the holding time in melt.

    其成型工艺参数包括冷却速度、成型压力、成型温度、保温时间。

  • The heating temperature and holding time had distinct effects on the copper diffusion depth in the stainless steel socket.

    结果表明:铜在不锈钢衬筒中的扩散深度随着停留时间和加热温度的增加而增加;

  • Results indicated that activation temperature, temperature holding time and activation agent ratio determined the depth of activation and the micropore distribution.

    实验结果表明,活化剂用量、活化温度和活化时间都决定着活化反应的深度。

  • Methods Of refrigerated transport Methods and insulation measures to observe the transit of drugs in refrigerated holding time of change.

    方法分析各种冷藏运输方法及保温措施,观察冷藏药品在运输中的保温时间变化。

  • At the same carbonization temperature and holding time conditions, different raw materials charcoal heat is not the same.

    在同样的炭化温度和保温时间条件下,不同原材料的木炭发热量也不相同。

  • The effect of heating temperature, holding time and cooling mode on its crystallizability and dissolution rate of potassium is not obvious.

    改变合成温度、保温时间以及冷却方式等,对合成试样的结晶性能以及试样中钾元素溶出率的影响很小。

  • Theory analysis and experiment had been done for confirming the veracity of the critical time formula used for forecasting the holding time at which the segregation concentration reaches a maximum.

    对等温过程中的临界时间公式进行了理论分析与实验验证,证实了临界时间公式用于预测溶质原子非平衡晶界偏聚量达到极大值的恒温时间的準确性。

  • The results show that heating temperature and holding time are two important factors affecting the grain size and uniformity.

    实验表明,加热温度和保温时间是影响晶粒尺寸和均匀性两个重要的因素。

  • In this article, a thorough investigation has been conducted into heating rate, holding time and cooling speed in an effort to work out an optimum ingot annealing process.

    本文对铸件退火时如何控制加热速度、保温时间、冷却速度进行了充分的研究和探讨,为合理制定铸件退火工艺指出了方向。

  • Researches show that intermediate cooling can shorten the holding time with water cooling without affecting the product quality, and improve the rolling efficiency.

    研究表明中间冷却技术可以在不影响产品质量的前提下,通过对待温的中间坯进行喷水冷却,缩短控制轧制待温时间,提高生产效率。

相关热词