片语

hot steel rolling热轧过程

hot-rolling sheet热轧板

hot groove rolling热辊轧制

hot-rolling wastewater热轧废水

Hot-rolling property热轧性能

aluminum hot tandem rolling铝热连轧

hot direct rolling直接热轧制

hot-rolling seam热轧无缝钢管

英汉例句

• this type of defect is formed during the hot rolling process of the raw material.

  这种类型的缺陷形成的热轧过程的原材料。

• in this paper, the mathematic model of copper yield stress in hot rolling was established by means of multiple non-linear curve fitting method.

  应用多元非线性曲线拟合的方法，建立了铜热轧变形抗力数学模型；

• components and lubricating properties and effect of lubricating oil for steel hot rolling are intro-duced.

  概要介绍了钢热轧润滑油的组成及其润滑特性、钢热轧的影响因素。

• the effect of moisture content on shale stability was investigated by hot rolling test.

  用改进的热滚分散法探讨了含水量对硬脆性泥页巖稳定性的影响。

• the master production scheduling(mps) problem of hot rolling seamless steel tube is formulated as a mixed integer linear programming model.

  建立了热轧无缝钢管主生产计划问题的混合整数线性规划模型。

• our company located at the shandong qingdao huangdao district, main business cold rolling volume, hot rolling volume, pot galvanize, electricity galvanization and stainless steel.

  我公司位于山东青岛市黄岛区，主营冷轧卷，热轧卷，热镀锌，电镀锌和不锈钢。

• we have developed a perfect application software package to optimize hot rolling specification.

  本文为热轧优化规程提供了一套较为完善的应用系统软件。

• big ferrites and hot rolling texture are left behind in particle structures, which leads the anisotropy of mechanics, so the tensile strength and elongation rate reduce.

  含有粗大的铁素体晶粒和残留的热轧织构，引起力学性能的各向异性，导致了抗拉强度和延伸率的降低。

• new evaluation methods for fragile shale are introduced, including improved hot rolling test, filter cake strength tester, and dynamic filtration test.

  介绍了硬脆性泥页巖稳定性评价的几种新方法——改进的热滚分散法、泥饼强度测试法及动滤失试验法。

• the rolling technology and force-power parameters of hot rolling of pipeline steel grades x60h, x65h are discussed in the paper.

  对热轧管线用钢板x60h、x65h试轧过程中的轧制工艺和力能参数进行了较全面的分析研究。

• the process of a pipe production is the following: a round cast workpiece is put onto a hot rolling line where it is cut, heated, stitched and rolled till a pipe of necessary size is ready.

  一个钢管的生产流程如下：圆管坯放在要被切割的高温轧制线上，继续升温，穿孔，轧制直到管坯大小基本成型。

• this paper gived the new technology of phc pipe pile plank in end, which is hot rolling and reel, and discussed the technological key.

  本文提出了phc管桩端板采用热轧卷取法生产的新工艺，并对生产过程的技术关键作了论述。

• the paper discusses the production potential of walking beam slab furnace at hot rolling plate plant of pangang.

  探讨了攀钢热轧板厂步进梁式板坯加热炉的生产潜力。

• steel-making, continuous casting, hot rolling are the three important working procedure in steel manufacturing enterprise.

  热轧是钢铁企业三大关键工序炼钢、连铸、热轧之一。

• sp52 ultra-fine grain hot rolling sheets which have q235 composition were produced in pansteel 1450 industrial mill.

  在攀钢1450热连轧机上，用q235普碳钢成分生产出了具有超细晶粒的sp52热轧钢板。

• this thesis studies the effect of wide—high ratio, bump ratio and reduction ratio on the skew ratio in plain roller rolling square bar through simulated hot rolling steel by steel roller rolling lead.

  通过钢辊轧制铅件模拟热轧钢件，研究了平辊轧制矩形件过程，轧件的宽高比、鼓形比和压下率三个参数对脱方的影响。

• we manufacture hot rolling steel pipes, straight seam pipes and seamless steel pipes.

  我公司生产热轧钢管，直缝钢管和无缝钢管。

• this paper describes the old and the new loop length mathematical models of hot rolling mill of wuhan iron and steel co.

  介绍武钢热轧厂活套高度控制系统更新前和更新后的套量数学模型，详细分析了更新后系统的套量计算方法和优点。

• the effect of hot rolling banded microstructures on fracture morphology, cold rolling microstructures mechanical properties of the sheet steel has been investigated.

  研究了热轧带状组织对双相钢断口形貌、金相组织和钢板力学性能的影响。

• by warm rolling after hot rolling or cold rolling after annealing in process and stabilizing annealing in some temperature condition, the c.

  采用热轧后温轧或中间退火后冷轧，再在一定温度下进行稳定化退火的工艺，可以获得综合性能良好的铝-镁-钪合金冷轧板材。

• rotary de-scaling downstream of the tunnel furnace may be considered as an alternative to the conventional high-pressure de-scalers with stationary headers located in front of the hot rolling mill.

  位于隧道炉下方的旋转除锈器被认为替代了传统高压除锈器，这种除锈器在热轧机前方安装一个固定的喷头。

• facilities that combine all the stainless steel making facilities from melt shop through hot rolling and cold finishing, to produce mill products.

  包含所有的不锈钢生产设施，即炼钢车间、热轧、冷加工等设备的工厂。

• the retained hot rolling structure and weak texture in final strip product are observed.

  板带的最终组织中含有残留的热轧织构，织构组分较杂且弱。

• the important reason for the poor stability during strip hot rolling process was the working fault resulted by the deviated running of the strip in the mills and the strip end defects.

  热轧带钢生产时带钢的端部缺陷或在热轧机组上跑偏等而引起的运行故障，是带钢轧制过程稳定性差的重要原因。

• the steckel mill rolling process differs considerably from convention tandem or reversing hot rolling mills, mainly due to the use of steckel furnaces for heat retention.

  炉卷轧机轧制工艺与传统连续式或可逆式热轧机大不相同，其主要区别在于炉卷轧机保温用的保温炉。

• the problem of scheduling hot rolling operations in iron and steel plants is studied.

  研究了钢铁企业热轧工序的生产调度问题。