片语

hydraulic simulation model水力学模拟模型

hydraulic numerical model水流数学模型

hydraulic test model水力模型

Groundwater hydraulic management model地下水水量管理模型

Hydraulic oil model液压油型号

hydraulic hitch model液压模型

hydraulic structural model test水工结构模型试验

hydraulic physical model水工物理模型

hydraulic climbing model液压爬模

英汉例句

• in engineering practices, the hydraulic model test is the common way to determine overflow capacity of a weir and pressure distribution on the weir.

  工程上溢流堰的过流能力以及堰面压强分布的确定多采用水工模型试验。

• based on the hydraulic model test of an oblique inlet passage, the hydraulic loss coefficient and distribution of the outlet velocity of the inlet passage are obtained in the paper.

  由斜式进水流道模型水力特性试验得到了进水流道的水力损失和出口流场的分布，分析了进水流道出口流场对水泵及其装置性能的影响。

• based on analogic theory, hydraulic model was founded to choose the optimum gating system for prevention from casting defects including gas hole and misrun.

  水力模拟依据相似理论，建立水力模型，选出最佳浇注系统，防止吸气、浇不足等缺陷；

• the results of hydraulic model tests, prototype measurements and numerical calculations have been compared and coincide quite well.

  同时针对松花江丰满电厂尾水河道水流特性做了水工模型试验、原型观测和数值计算，结果吻合很好。

• according to the design of slab mould at aisc, a series of hydraulic model experiments were made.

  以安钢板坯连铸机结晶器为原型，进行了水力模型实验。

• by means of prototype observations, hydraulic model tests and pressure reduction tests the hydrodynamic characteristics of a tunnel inlet have been investigated.

  通过原型观测、水工模型试验及减压试验研究了进口的水动力学状况。

• a new form of energy dissipater named suspended grid plunge pool is posed through the hydraulic model experiment of diversion tunnel in jilintai first-or.

  悬栅消力池是在新疆喀什河吉林台一级水电站引水隧洞水力学模型试验中提出的一种新型消能工型式。

• this paper studied liquid steel flow property in mould of super low head slab cc with hydraulic model and mathematics model.

  本文应用水力学及数学模型的方法研究了超低头板坯连铸结晶器内钢水流动特征。

• the estimation formula for slit-type buckets maximal pressure intensity is given through analysis and hydraulic model test.

  通过分析研究和水力模型试验，提出了窄缝式挑坎最大动水压强的估算式。

• based on the hydraulic model investigations, the problems associated with navigation conditions in the channel are discussed.

  本文根据水工模型试验成果，讨论了明渠通航水力学有关问题。

• by means of a 1/17 scale hydraulic model of the lock culvert valve of the tgp, the valve trunnion loads were measured and their fluctuation values and characteristics were analyzed.

  通过几何比尺17的阀门段水力学模型试验，测量了在阀门运行过程中三峡船闸输水阀门支铰荷载，并分析了其脉动量的数值及频率特性。

• to testify the application of the hydraulic model library, doing the design of the similar transformation of the impeller blade, and attaining the satisfied result.

  作为水力模型库的应用验证，进行了叶轮叶片的相似换算设计，获得了令人满意的设计结果。

• impeller hydraulic model with excellent design, has excellent dynamic and static flat horizontal and stable performance.

  叶轮采用优秀水力模型设计，具有极好的动静平横，性能稳定。

• a typical dust-pan-shaped suction box hydraulic model and experimental apparatus are designed for testing on hydraulic loss.

  对一经优化设计的泵站簸箕型进水流道制作了水力模型，测试其水力损失；

• the prototype observation in the construction site shows that the tests of hydraulic model and self propelled ship model have gained the expected results.

  施工现场的原型观测表明：水工模型和自航船模试验取得了预期效果。

• in view of this problem, this paper curries out serials of hydraulic model test to fine out the mechanism of effect of roughened apron extension upon energy dissipation and erosion control.

  因此，本论文针对这一问题，进行了一系列水工模型试验以分析研究海漫加糙对消能防沖影响的机理。

• the pulsate pressure in high speed flow water will influence the safety of water construction, and the eigenvalue of the pulsate pressure should be confirmed by hydraulic model testing.

  高速水流中的水流脉动对水工建筑物的安全运行存在很大的影响，水流脉动压强的特征值一般需通过水工模型试验确定。

• from hydraulic model test, varying characteristics of the flow structure of the dam area during the different running periods of the tgp are studied.

  通过水工模型试验研究了三峡枢纽不同运行时期的坝区水流结构变化特点。

• hydraulic model tests have showed that the devised method describes the hydraulic characteristics of the bucket well, and the computational results agree with those measured.

  模型试验表明本方法可以比较準确地反映这种窄缝挑坎的水力特性，试验结果与计算结果基本一致。

• however, smith was too sophisticated to favor a hydraulic model of motivation, and had written earlier that vanity was the primary spur to ambition.

  然而，斯密如此的成熟老练，他更倾向于用水压模型来描述野心，并且在更早之前就提出虚荣是刺激也行产生的基础。

• the scale effect is one of important factors of influencing hydraulic model test precision.

  缩尺效应是影响水工模型试验精度的重要因素之一。

• the parabolic shape is better than the arc shape through comparing time averaged pressures, fluctuating pressures and cavitations by theoretical analysis and hydraulic model experiments.

  通过理论分析与模型试验，从时均压力、脉动压力、空化数等方面得出缓坡与陡坡过渡衔接部位采用抛物线型式较圆弧型式好的结论。

• for solving this problem, the hydraulic model experiments are carried out.

  为解决此问题，进行了水工模型实验。