片语

hydraumatic液压；液压轴承

hydraulic efficiency pressure switch液压开关

hydraulic oil pressure balance液压油压力平衡

steering hydraulic system pressure转向液压系统压力

hydraulic test pressure[试验] 水压试验压力

hydraulic line pressure液压管路压力

full hydraulic down pressure最大的向下液压压力

Hydraulic system pressure液压系统压力

water head水头（水源）；水压；[水利] 水位差；落差

Hydraulic pump pressure液泵压力

Hydraulic Seepage Pressure Sensor水工渗压传感器

英汉例句

• valve-less electro-hydraulic servo system controls the system of hydraulic pressure by the measure that speed variable electromotor drives the hydraulic pump directly.

  无阀电液伺服系统是用调速电动机直接驱动液压泵，实现对液压系统的控制。

• there are two general types of power steering. one type is self-contained, with all hydraulic pressure applied to the pitman arm shaft.

  动力转向一般具有两种类型。一种是独立的，所有的液压力都施加在摇臂轴上。

• the foundations of these high dams are crack rocks, after big reservoirs impounding, high hydraulic pressure will be put on the crack rocks, and can they bear the high pressure?

  这些高坝大库坐落在裂隙巖体之上，蓄水后坝基裂隙巖体将面临很高的外水压力，那么它们能否承受这么高的水压力?。

• it has four mechanical shifts, and its speed could be adjusted by hydraulic pressure with stepless speed change .

  它有四个主要的机械位移，其速度可以调整，由液压压力与无级调速改变。

• construction vehicle「s hydraulic pressure drive system is composed of diesel, hydraulic pump, hydraulic motor and working system, they interact each other.

  工程车辆液压驱动系统由发动机、液压泵、液压马达、行走机构组成，这四个部分之间相互联系和影响。

• there is one other option available - hydraulic kers, where braking energy is used to accumulate hydraulic pressure which is then sent to the wheels when required.

  当然也有另一个可使用的选择—液压kers，剎车能量被用来积聚液压压力，然后在需要时发送到车轮。

• the reverser can only be deployed on the ground with hydraulic pressure available.

  反推器只能够在地面液压系统有效时打开。

• stress of surrounding concrete of each draft tube is analysed by the finite-element method under condition of the highest hydraulic pressure and the variable regularity of stress is obtained.

  基于有限元法，分析了两个尾水管在各自最大内水压力条件下外围混凝土的受力，得到各自的应力变化规律和特点。

• mainly serves the construction mechanical, the project machinery hydraulic pressure repair outfit.

  致力服务于建设机械翣、工程机械液压修理包。

• this paper analyzed some hydraulic pressure design defects that cause the equipment breakdown, and proposed the improvement program.

  文章分析了导致设备出现故障的几种液压设计缺陷，并提出了改进方案。

• contrasting various pre-loading methods, hydraulic system is applied to control torque, the relationship of hydraulic pressure and torque is measured through tests and more visual.

  本论文在对比各种旋紧方法之后，采用液压系统实现扭矩控制，通过试验测定液压压力与扭矩之间的关系，扭矩控制更加直观和準确。

• in this paper we discuss calculation of hydraulic pressure machine cross beam byent method.

  本文对多向模锻液压机横梁用有限元方法进行了分析。

• besides, his teaching design on hydraulic pressure won the first prize in the first national middle school physics new course teaching design competition in 2011.

  在2011年首届「全国中学物理新课程高效课堂教学设计群英大赛」中，其《液体的压强》教学设计获全国一等奖。

• design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.

  设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。

• being an important functional element, the performance of the hydraulic pressure gear motor affects the system operational performance and its application development.

  液压齿轮马达作为重要的执行组件，其性能的好坏影响到系统的使用性能及其应用发展。

• plasticizing unit drove by hydraulic pressure motor, simple in structure and maintenance.

  液压马达直接驱动螺桿的塑化单元，结构简单，维护简单。

• the curative agent hydraulic pressure system have two sets of filtration devices advance the uniformity and curative capability.

  固化剂液压系统设有两道过滤装置，提高了两种组分的混合均匀性及固化性能。

• one type is self-contained, with all hydraulic pressure applied to the pitman arm shaft.

  一种是独立的，所有的液压力都施加在摇臂轴上。

• the hydraulic pressure oil pump wears, the seal does not seal. should repair or the replacement damage hydraulic pressure oil pump and the seal.

  液压油泵磨损，密封件不密封。应修复或更换损坏的液压油泵和密封件。

• the several common types of hydraulic pressure sources of hydraulic system in hot press were analyzed.

  液压源形式的选择直接关系到热压机的性能和板制品的质量。

• hydraulic pressure design includes selecting the component」s type and setting up the whole hydraulic pressure system.

  主体液压部分设计包括主要液压元件的选型及整个液压系统的搭建。

• based on the analysis of hydraulic pipe break style, the relationship between fatigue break of hydraulic pipe and hydraulic pressure was studied.

  在分析液压导管破裂类型的基础上，重点分析了液体压力作用与液压导管破裂的关系。

• this article from the repeatability, the high accuracy, cleanliness, energy saving aspect and so on, compared with all-electric imm and traditional hydraulic pressure imm good and bad points.

  本文分别从可重复性、高精度、清洁、节能等方面，比较全电动注塑机与传统液压注塑机的优缺点。