英语释义

1. a test for determining the impact strength of a material
the impact test of the pottery was made with a dropping metal ball

片语

impact elasticity test沖击弹性试验

impact tearing test沖击

impact sensitivity test撞击感度试验

alternating impact bearing test交变沖击弯曲试验

alternating impact bending test交变沖讳曲试验

impact wear test沖击磨损试验

impact pulling test沖击

impact brittleness test沖击脆性试验

shock test[电子] 沖击试验；[试验] 抗震试验；[试验] 震动试验

impact strength test[机]

impulse test[试验] 沖击试验

英汉例句

• this paper proposes a mechanical model of hydraulic shock absorber for sled impact test based on the law of orifice flow, and discusses the factors influencing the model.

  应用孔口节流理论，建立了汽车模拟碰撞用液压缓沖器的力学模型，同时对主要参数对模型的影响进行了具体的讨论。

• a large amount of impact test was carried out on four kinds of common rock by using shpb.

  作者利用shpb装置对常见的四种巖石进行了大量沖击试验。

• the extra-cryogenic impact toughness and influence factors of the high-mn austenitic steel are studied by means of the charpy v-notch impact test and the sem fractured appearance analysis.

  本文通过在超低温下的v型缺口夏比沖击试验和sem断口分析研究了高锰奥氏体钢的沖击韧性及其影响因素。

• the corrosion weight loss rate and impact toughness of high mn steel in hot concentrated caustic solution were studied by using immersed corrosion, impact test and sem.

  采用浸泡腐蚀试验和腐蚀前后的沖击试验并借助于扫描电镜观察，研究了热强堿介质中高锰钢的腐蚀速率和沖击韧度。

• the paper introduces the method of drop impact test and cites the test examples and calculation for abs and pvc rigid plastics plates.

  介绍落锤沖击试验方法，列举abs板材和pvc硬质塑料板材的试验实例和计算。

• the charpy impact test of base metal, weld and heat affected zone of x80 grade pipeline steel of certain factory was conducted, and its effective grain was researched.

  对某厂x80高钢级管线钢母材、焊缝、热影响区进行了夏比沖击韧性试验，对其有效晶粒进行了研究。

• the method to determine the mechanical parameters in the constitutive equations of the rate-sensitive fiber by the tensile impact test of the fiber bundle are proposed from such models.

  由该模型得到了利用纤维束沖击拉伸试验确定单丝应变率相关的统计本构方程中力学参量的原理和方法。

• in order to study the front impact characteristic of one minibus, to validate the front impact simulation model created by the converse engineering method, the front impact test of the biw is done.

  为研究某微型客车的正面碰撞性能，验证通过「逆向工程法」所建立的白车身正面碰撞仿真模型，进行了白车身的正面碰撞试验。

• when the lowest design temperature of the vessel is -196℃, it is impossible for the actual cryogenic impact test temperature to be lower than or equal to -196℃.

  当容器的最低设计温度为-196℃时，实际的低温沖击试验温度无法实现低于或等于-196℃的要求。

• this article introduced a kind of self-designed v shape sample clamp for sharpy impact test machine.

  介绍了一种自行设计的夏比沖击试验v形缺口试样送样卡具。

• experimental data were obtained by means of all kinds of instruments such as a tensile machine, an izod impact test machine, thermogravimetric analysis, limit oxygen index(loi) instrument and so on.

  各种数据的获得借助于拉力试验机、悬臂梁沖击试验机、热重分析仪、和氧指数仪等各种分析测试手段。

• hydraulic bum per is the key component of simulating impact test equipment.

  液压缓沖器是模拟碰撞试验设备中的关键部件。

• according to several times free fall impact test video was shown air-way cushion pad can absorb impact force.

  由几次水球落下沖击测试影片可以明显看出air-way透气缓沖垫能有效吸收沖击力！！

• the impact test and sem fracture analysis were carried on for az80 magnesium alloy after different temperature ageing, and the effects of ageing on impact property were investigated.

  采用沖击试验和断口形貌分析对经不同温度时效处理后的az80镁合金沖击性能进行了分析。

• the impact test is made by the japanese railway comprehensive technology research institute in order to evaluate properly the bumping safety of rolling stock.

  为了正确评价铁道车辆的碰撞安全性，日本铁道综合技术研究所对车体构件进行了沖击试验，并分析了试验结果。

• firstly, the field impact test was carried out on the sandy beach of a tidal zone to attain the damage law of the submarine power cable under different impact energy of navy archor.

  首先在潮间带的海滩砂土上进行现场撞击试验，得到不同沖击能量下海军锚撞击海缆的破坏规律；

• the controllable horizontal impact test in laboratory is considered to be able to simulate the actual shipping environments according to the analysis at home and fr om abroad.

  通过对国内外现状的分析，认为在实验室内进行可控水平沖击试验具有较好的模拟性能，更接近实际流通情况。

• impact test shows that the collision-proof equipment can reduce body deformation, absorb impact energy, and prolong impact time.

  试验表明，在发生正面碰撞时，该碰撞防护装置能够减小车身变形、吸收碰撞能量、延长碰撞沖击时间。

• via a series of contrast experiments, the machine's main parameters accorded to the international standard of iso 14556 : 2000(e)「steel-charpy v-notch impact test — instrumented test method」.

  通过一系列对比试验，证明主要指标达到国际标準iso14556：2000（e）《钢材v型缺口沖击试验——仪器实验方法》的要求。