片语

impact-toughness tester沖击韧性试验机

impact fracture toughness沖击断裂韧性的

impact sound transmission toughness沖击韧性

impact toughness data沖击转变曲线

impact ductility沖击韧性

Weld seam impact toughness焊缝沖击韧性

thermal impact toughness热沖击韧性

impact toughness at-沖击

ageing impact toughness时效沖击韧性

英汉例句

• low carbon bainitic steel is a new kind of structural steel for its excellent low-temperature impact toughness and welding property.

  低碳贝氏体型非调质钢是一种新型钢种，具有良好的低温沖击韧性和焊接性能。

• the impact toughness and fracture toughness of the composite samples decrease after adding jute fibers when compared to pure polypropylene.

  黄麻纤维掺入聚丙烯导致黄麻纤维增强聚丙烯试样的沖击韧性摘要与断裂韧性下降。

• meanwhile the optimal welding parameter which was suitable for welding line impact toughness was gained by analysis on the test result of impact toughness and microstructure.

  通过对沖击韧性的测试结果与微观组织的分析，确定出使焊缝沖击韧性最佳的焊接工艺参数。

• the impact toughness of larch wood can be improved in some microwave irradiation experiments, which is arisen from the release of growth stress of larch wood.

  有时高强度微波处理能够使落叶松木材的沖击韧性有所提高，这与木材内部的生长应力一定程度的释放有关。

• the effect of normalizing on microstructure, strength, impact toughness and ductile-brittle transition temperature of fas390q axle housing steel was studied.

  研究了正火处理对fas390q桥壳钢显微组织、强度、沖击韧性和韧脆转变温度的影响。

• the composition was optimized by tiny alloying, orthogonal test design and the hardness and impact toughness test for the different samples with different combination of alloy composition.

  该技术采用微合金化，利用正交试验设计方法，对不同成分搭配的试样进行宏观硬度和沖击韧性测试，优化了合金成分。

• used for welding key structure, such as shipbody structure. the deposited metal has excellent low-temperature impact toughness and crack-resistance.

  用于重要结构的焊接，熔敷金属具有良好的低温沖击韧性和抗裂性能。

• the anisotropic characteristic which usually exists in materials disappeared completely especially the notch - impact toughness at the transverse direction was increased by 2-3 times.

  因此在通常材料中所存在的各向异性完全消失，特别是缺口沖击韧性横向性能值提高了2～3倍。

• alloys prepared by using wc powders with higher preparation temperatures are proven to have high impact toughness and good utility properties.

  高温制取的wc粉所配制的合金具有高的沖击韧性和良好的使用性能。

• the results show that re additive may improve considerably the impact toughness and has little effect on hardness of steel t10.

  试验表明，在t（10）钢中添加稀土元素对硬度没有明显的影响，但能显着改善该钢的沖击韧性。

• on mechanical properties, the strength was raised obviously, fatigue property was unchanged, impact toughness and ductility were reduced.

  在性能方面，强度被显着地提高，机械疲劳性能变化不明显，沖击韧性和塑性降低。

• in addition, the thermal stability of the diamond was characterized with the results of static compressive strength and impact toughness at different temperatures, as well as dsc and tga analyses.

  以金刚石在不同温度下的静压强度和沖击韧性以及差热分析和热重分析的结果来表征金刚石的热稳定性。

• the alloy impact toughness was lower, but it had a strong impact resistance capacity after welded with a q235a steel.

  该合金单体结构沖击韧性较低，与韧性好的q235a钢焊接复合后抗沖击能力可明显提高。

• with the development of the diamond industry, the impact toughness test of diamond has been gaining more and more recognition among the diamond users and the makers.

  随着金刚石行业的发展，金刚石的沖击韧性测定越来越得到广大金刚石用户及生产厂家的认可。

• adopting forging method and proper heat treatment after forging can improve significantly the impact toughness of chromium alloy white cast iron.

  利用锻造方法并结合锻后适当的热处理工艺可大幅度提高铬合金白口铸铁的沖击韧性。

• the mechanical properties such as fatigue, transverse impact toughness and anisotropic properties of steels treated with ba-containing alloys are remarkably improved.

  经含钡合金处理的钢材力学性能，如疲劳、横向沖击韧性和各向异性可得到显着改善。

• three viewpoints concerned about various influencing factors of measuring impact toughness of pdc with dropping hammer method were summarized by analysis of the testing result.

  通过对测试结果的分析，作者对落锤法测定pdc抗沖击韧性的各种影响因素归纳出三点看法。

• the results indicate that impact toughness of alloy will descend with ageing treatment temperature increasing.

  结果表明，随着时效温度的升高，沖击韧性呈下降趋势。

• at the same time, the micro-hardness of the alloy on different microstructure units have been tested, besides macro-rockwell hardness and impact toughness of this material.

  本工作还测试分析了合金微观组成单元的显微硬度和不同热处理下的宏观洛氏硬度及沖击韧性。

• the yield strength, tensile strength and impact toughness of the material after iron plated do not obviously reduce.

  镀铁后材料的屈服强度、拉强度和沖击韧性值未发生明显下降。

• we research and manufacture impact toughness cement additive.

  研制出了抗沖击韧性水泥外加剂。

• to use the drop-weight impact meter to measure the impact toughness of the asphalt mixture , put forward the use of the impact toughness as an index to evaluate the anti-reflective cracking ability.

  利用落锤式抗压沖击仪测定沥青混合料的沖击韧性，采用沖击韧性这一指标评价大粒径沥青混合料的抵抗反射裂缝能力。