英语释义

1. the resistance of a material (as metal or ceramic ware) to fracture by a blow, expressed in terms of the amount of energy absorbed before fracture

片语

impact bedning strength沖击抗弯强度

impact t strength抗沖击强度

repeated impact bending strength反复沖击抗弯强度

impact adhesive strength沖击黏合强度

impact shear strength沖击剪切强度

impact shearing strength[力]

impact tensile strength沖还拉强度

impact shear strength of wood木材沖击抗剪强度

impact fatigue strength沖唬劳强度

英汉例句

• the testing results indicate that nanosized particles are uniformly located within bulk nanoplastics, and laser powers can strongly affect the hrl and notch impact strength of nanoplastics.

  试验结果表明，纳米粒子均匀地分散在纳米塑料中，激光功率对纳米塑料的洛氏硬度及缺口抗沖击强度有显着影响。

• on top of that, inconsistencies in impact strength from batch to batch increased the chances of having part breakages . ?

  最重要的是，前后不一致的沖击强度从一批批的机会增加了部分破损。？

• the impact strength of reinforced plastics by toughened resin is higher than byuntoughened resin.

  增韧树脂比未增韧树脂得到的增强塑料沖击强度要高。

• the result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.

  研究结果表明，复合材料的沖击强度、拉伸强度随玻纤用量的增加而提高。

• with increasing of pmde content, the resin viscosity and impact strength decrease, while the thermooxidative stability increases.

  随pmde含量的增大，树脂粘度和沖击强度降低，热氧化稳定性提高。

• adding gf increased not only tensile strength and bending modulus but also impact strength of the composite.

  gf的加入不但提高了材料拉伸强度、弯曲性能，而且提高了其沖击强度；

• the affect of system shock absorber are also part-discussed by changing impact strength of pulse force and impact waveform.

  分别讨论改变脉沖力的沖击强度和沖击波形时对系统减振效果的影响。

• the results show that the tensile strength and impact strength of the composite increase with the increase of carbon fiber cloth content.

  结果表明，随着碳纤维布含量的增加，复合材料的拉伸强度、沖击强度提高；

• the traditional method of impact modification can enhance the impact strength of rigid pvc profiles, but will not be of benefit to the property of weathering resistance.

  在目前使用的普通硬质聚氯乙烯沖击改性方法中，传统的沖击改性方法虽然提高了型材的沖击强度，但是耐候性能不过关。

• the negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness .

  这种加强的负作用通常是抗沖击强度降低及磨损性增加。

• it has good flexibility, impact strength and high.

  它具有柔韧性好、沖击强度高等特点。

• it expatiated the effects of the factors, such as sample size, temperature, humidity, notch and etc, on the result of the plastic impact strength test.

  阐述了试样尺寸，温度、湿度、缺口以及缺口加工方式等因素对塑料沖击强度测试结果的影响。

• the interrelationship between the modified microstructures and the impact strength and friction performance was investigated.

  研究改性产物的微观结构与其沖击强度和摩擦性能之间的内在关系。

• in addition, we toughen and modify nylon 6 to enhance its impact strength deeply.

  又对尼龙6进行了增韧改性，其沖击强度可大幅度提高（略）。

• with the decrease of core sizes, the impact strength modified systems increases and the internal stress of modified systems decreases apparently, while shearing strength changes slightly.

  随着核壳粒子橡胶相尺寸的减小，改性体系的沖击强度逐渐增加，内应力降低，但对体系的剪切强度影响并不显着。

• experiment shows that with increasing of the molecular weight, the resin viscosity and thermooxidative stability increase, while the impact strength decreases after increasing.

  实验表明随着分子量的增大，树脂粘度增大，热氧化稳定性提高，沖击强度先增大后减小；

• however, if the polymer is pliable and has enough adhesion to filler, the conductivity and impact strength may be increased simultaneous-ly within certain content of filler.

  若基体本身比较柔软且对填料有足够的亲和力，则在一定的填料含量范围内，导电性和沖击强度可同时提高。

• the result shows that the impact strength of the new developed plastic packing box is enough, the impact breakage is due to the unqualified raw material of box.

  结果证明，新研制的某炮弹塑料包装筒的结构设计满足沖击强度的要求，其产生沖击破坏的原因是包装筒塑料原材料不合格。

• high impact strength even at low temperatures.

  在低温下也能承受高沖击强度。