片语

laser achievement power激光输出功率

Laser Relative Power Noise激光器相对强度噪声

Laser switching power supply激光器开关电源

laser peak power激光峰值功率

laser piercing power激光穿透能力

Tunable Laser and power可调谐激光器及电源

Laser Fusion Power聚变发电

laser output power激光输出功率

英汉例句

• butgenerating the megawatts of laser power required for thel — knownin israel as 「nautilus」 — meant brewing up hundreds of gallonsof toxic chemicals, like ethylene and nitrogen trifluoride.

  但是thel需要产生数兆瓦的能量——在以色列被称为「鹦鹉螺」——意味着会产生数百加侖的有毒化学物质，如乙烯和三氟化氮。

• discussing the necessary of laser power control in cutting processing. giving out a method to realize laser power controlling.

  讨论了激光功率控制的必要性，给出了激光功率控制的原理以及一种实现方法。

• this dissertation firstly reviews the development of laser machining and laser power, analyzes the current laser machining status and laser power technique.

  本文首先回顾了国内外激光加工技术、激光电源的发展，分析了激光加工技术和激光电源的现状。

• it is shown that the nonlinearity and inhomogeneity of the medium, laser power and input beam parameter affect their propagation properties.

  结果表明，介质的非线性性和非均匀性、激光功率及入射光束参数影响其传输特性。

• they are the cavity radiometer and the water flow power meter for laser power measurement, the cone calorimeter and the volume-absorbing calorimeter for laser energy measurement.

  有测量激光功率的空腔型辐射计和流水式功率计、测量激光能量的锥型能量计和体吸收型能量计。

• 「the larger the distance, the more laser power is required, so the higher the danger of overheating or even burning particles,」 rode said. 「so the distance depends strongly on the particle properties.

  “距离越远，所需的激光强度就越大，因此微粒过热甚至点燃微粒的危险也越大，」罗德说，“所以距离很大程度上取决于微粒的性质。

• one shortcoming of these beams is that they typically have a range of energy, caused by the gradual rise of laser power from zero to its maximum level.

  但它的一个缺点就是，激光功率从零升到最大值的过程，会使粒子或x射线束具有一定的能谱分布。

• choosing appropriate laser power and reducing laser irradiation time in laser drilling can also improve drilling quality.

  激光鉆削时，选择合适的激光功率及减少激光照射时间可提高鉆削质量。

• conclusiontduring a litt treatment, the rx should be based on the general consideration of different biological properties and the laser wavelength, laser power and the laser probe exposure duration.

  结论：激光诱导间质热疗中，需要综合考虑生物组织特性和激光波长、功率及曝光时间等治疗参数来制定治疗方案。

• then it discusses the relations of catalytic activity with composition of the catalyst, laser power and melting time.

  同时还考查了催化剂组成、激光功率及熔炼时间与丙烯歧化反应活性之间的关系。

• with increase of heat input and laser power density, the cross section of the weld transformed from nail shape to near x shape.

  随焊接热输入和激光功率密度的增大，焊缝截面由钉形向近x形转变。

• if we select substrate temperature, laser power and the scan speed properly, we can get good crystallization. it is useful to the fabrication of soi devices.

  适当选择衬底温度、激光功率和扫描速度可望获得良好的结晶，它对soi器件的制作是有意义的。

• some standards of laser power and energy at nim are summarized.

  本文综述了中国计量科学研究院研制的激光功率和能量标準。

• further more, the effects of different focus position and incident laser power are investigated.

  并且研究了不同聚焦深度及入射激光强度对记录效果的影响。

• cracking rate is decreased by increasing the laser power or reducing the feed rate.

  当增大激光功率、减少送粉速率时，熔覆层的裂纹率下降；

• it showed that the weld cross section with both laser welding processes transformed from nail shape to near x shape with increase of laser power and decrease of welding speed.

  结果表明，随激光功率增大和焊接速度降低，复合焊与单一激光焊焊缝的横截面形貌均由钉形向近x形转变。

• this is the most versatile, compact, and affordable laser power meter available today.

  这是现今市场上最通用、紧凑和经济的激光功率计。

• using an optical switch, this ramp up time can be reduced to less than a tenth of a picosecond, delivering peak laser power to the plasma on a faster time scale.

  使用光开关，可以把这种功率的上升过程缩短到小于0.1ps，在更短的时间内激光以峰值功率到达等离子体。

• the relationship between ablation velocity and laser power density is almost linear.

  结果表明，蚀除速度与激光功率密度呈近似线性关系；

• in this paper, mainly introduced laser power meter basic composition, and design two project for the measurement of laser power .

  在本文中，主要是介绍了激光功率计基本组成，并设计出两个方案用于大功率激光的测量。