片语

LASER Hybrid Welding激光复合焊接

laser-welding machine激光焊接器

laser also welding technology激光焊接技术

hybrid laser arc welding实施激光复合弧焊

Laser Scanner Welding激光飞行焊接技术

Laser Deposit Welding Technology利用激光沉积焊接

laser deep welding激光深熔焊

laser spherical welding激光球焊

laser braze welding激光束钎焊

英汉例句

• results:at each time point, compared with hand suture method, laser welding had the advantages of faster conducting speed, larger amplitude and shorter maintaining time of action potential.

  结果：术后各时间点，同手法缝合侧相比，激光焊接吻合的神经传导速度快，动作电位幅值大，动作电位持续时间短。

• laser welding thin wall bit is characterized by high welding strength of bit teeth, no falling out of the teeth and mass production by non water dry drilling.

  激光焊接薄壁鉆头的显着特点是鉆齿焊接强度高，不掉齿，可以用于无水干鉆，便于实现大批量规模化生产。

• a numerical method is presented for the two dimensional quasi steady state heat transfer on high power density laser welding processes according to the keyhole model.

  对高能量密度激光匙孔焊接过程的二维準稳态传热进行了计算方法的研究。

• a method to obtain the diagnostic signal, the acoustic feedback control system and the principle of laser welding diamond saw are described in the paper.

  介绍了特征声信号的提取方法及其用于激光焊接金刚石锯片的反馈控制系统构成和基本原理。

• autogeneous co2 laser welding were run along the butt between two materials using sets of parameters power and travel speed.

  采用不同功率和运转速度参数对两种材料进行了co2激光对接焊。

• objective to compare the healing process of skin incisions repaired by laser welding, intradermic suture and interrupted suture with emphasis on the advantages of laser welding method.

  目的对比观察激光焊接法、皮内缝合法及结节缝合法修复的人体皮肤切口愈合情况，阐明激光修复皮肤切口的优越性。

• then we carry on the study and development on laser welding equipment with high beam quality.

  因此我们进行了高功率、高光束质量的激光焊接设备的开发和研究。

• the opening control system of laser welding robot used in car industry is introduced in this article.

  介绍目前在汽车制造业普遍使用的激光焊接机器人的开放式控制系统。

• a laser welding quality monitoring method is proposed, based on support vector machine.

  提出了一种基于支持向量机的激光焊接质量监测方法。

• a practical high-power co2 laser welding and cutting equipment with high beam quality was introduced, the optical system was analyzed.

  介绍了一种实用型高功率、高光束质量co2激光焊接、切割机，分析其光学系统。

• it showed that the weld cross section with both laser welding processes transformed from nail shape to near x shape with increase of laser power and decrease of welding speed.

  结果表明，随激光功率增大和焊接速度降低，复合焊与单一激光焊焊缝的横截面形貌均由钉形向近x形转变。

• the toughness of haz is higher than base metal under appropriate laser welding conditions.

  在合适的激光焊接条件下，热影响区韧性高于母材；

• the application of laser welding technology in p/m materials and its developing status are systematically introduced.

  系统地介绍了激光焊接技术在粉末冶金材料中的应用及其国内外动态。

• the application results show that laser welding can meet higher strength stress demands for those fatigue load parts, such as intake and exhaust valves, timing gear, suspension equipment.

  应用结果表明：对于进排气门、正时齿轮和悬架装置等承担疲劳载荷的零部件，激光焊接可满足其较高的强度要求；

• test results indicate that compound process of laser welding can remarkably improve weld penetration and welding speed, therefore low power laser welder can be used for aluminum alloy welding.

  试验结果表明，激光焊复合工艺可以显着提高焊缝熔深和焊接速度，从而实现采用小功率激光焊机实现铝合金激光焊接的目的。

• application of laser welding technology in the production of engineering vehicle.

  激光焊接技术在工程车辆生产中的应用。

• the technological properties of laser welding for aluminum and aluminum alloys are described.

  概述了以激光为热源的铝及铝合金激光焊接技术特性。

• the laser welding process of diamond saw blade is advanced.

  金刚石锯片的激光焊接工艺较为成熟；

• conclusion plasma welding and laser welding are ideal joining methods for titanium in dentistry.

  结论等离子焊接与激光焊接是比较理想的牙科钛材焊接方法。

• latest welding technologies such as middle frequency spot welding and laser welding have been widely used.

  中频点焊、激光焊接等焊接技术已较广泛地应用；

• in high power laser welding penetration is the precondition of high quality.

  高功率激光焊接过程中，熔透是保证焊缝质量的前提。

• in order to avoid the possible softening of haz in welding of rpc steel, laser welding is one of the best methods due to its faster heating and cooling rate and narrower haz.

  激光焊接有很快的加热和冷却速度，热作用范围窄，在合适的工艺条件下可避免rpc钢haz的软化，激光焊接是高质量焊接rpc钢的方法之一。