片语

liquid d flow counter液体流动计数器

liquid-flow equation液体流量方程

spiral liquid-flow螺旋液流

liquid vortex flow transducer液体涡流传感器

liquid core flow meter液体流速计

liquid phase flow model液相流动模型

liquid-flow counter流液计数器

liquid rimming flow液环运动

liquid core flow indicator液体流动观察玻璃

英汉例句

• The liquid flow system of a stope is a key for stope leaching.

  采场液流系统的研究是就地浸出的关键技术之一。

• According to the liquid flow characteristic of bubble column, we hope to decrease axial backmixing of the liquid by putting some baffles which have certain distribution rule in the bubble column.

  根据鼓泡塔内液相流体的流动特点，我们希望在鼓泡塔内加入了一定数量按照一定规律排列的挡板，能够减弱鼓泡塔的液相轴向返混。

• F61 serial liquid flow switch suits for measuring the liquid flow conditions from the pipes, such as: water, ethylene, glycol or other liquid which will not corrupt brass or phosphor bronze.

  F61系列的液体流量开关，用于测量流经管道的液体流动状态，例如：水、乙烯、乙二醇或任何对黄铜、磷青铜无腐蚀作用的流体。

• Discharge valve can be will collect the liquid and solid particle emissions, prevent the liquid flow off the downstream, the pollution downstream compressed air system.

  排放阀可以将收集的液体和固体微粒排放掉，防止液体流向下游端，污染下游端的压缩空气系统。

• The liquid flow behaviour and mechanism of sugar extraction in the cane diffuser have been discussed.

  对床层中液体的流动特性进行了分析，对渗滤式渗出器的糖分渗出机理进行了探讨。

• It was summarized in present paper that the liquid flow acted in the transfers process, solidification structure and componential segregation.

  文章从传输过程、凝固组织和成分偏析等三个方面对液相流动的作用作了综述。

• With increasing of superficial gas velocities, the liquid flow regime was changed from homogeneous to transitional and radial gradient of axial liquid velocity was rather small.

  且当表观气速增大，初始流体流动处于由均匀流型向过渡流型的转变，轴向液体速度在径向的梯度非常小；

• Based on the plane and section isoline of fluid potential, the distribution features of liquid flow in the studied areas were analyzed.

  在编制流体势平面和剖面等值线图的基础上，分析研究区的流体势分布特征。

• It has been analysed that liquid flow pattern and liquid crosswise eddy diffusion influence on efficiency of bubble tray.

  本文分析了液相流动形态及液相横向扩散对鼓泡型塔板板效率的影响。

• This paper studies the filling type characteristics of the metal liquid flow in squeeze casting, and employs high-speed photography to examine the filled state of melting body.

  研究了挤压铸造中金属液流的充型特性，利用高速摄影观察溶体的充填状态。

• We find that the apparent slip of the liquid flow over solids is affected by the integrated factors of boundary slip, liquid sticking and liquid_internal slip.

  液体在固体表面的表观滑移是液体在固体表面的速度滑移、粘附和流体内部滑移的综合作用的结果。

• Synchronized movements of the six-way valve and DIV made it possible to establish a simple flow path of the sample and a continuous liquid flow through the column.

  六通阀和DIV的同步协调运行使得建立一个简单的样品流路和连续流体经过分离柱的系统成为可能。

• A three - dimensional mixing-pool model of a distillation column containing structured packing was established, in which liquid flow distribution and mixing were considered.

  建立了能描述规整填料塔中液体三维流动和混合的精馏过程混合池模型。

• Gradient of liquid level increases with the increase of liquid flow and the height of weir.

  液面梯度随液体流量的增加而增加，随堰高的增加而增大。

• On the consideration of only liquid flow friction and oil tube upward velocity, the calculation model of coiled tubing's setting depth is established.

  文章在不考虑摩擦、只考虑液流产生的摩阻及油管上提作业时的上提速度等三种情况下，建立了连续油管下入深度的计算模型。

• A new type of indirect flow control method shows that liquid flow can be controlled with a mass flow controller on the squeeze air system.

  介绍了一种新型的调压式流量控制方法，即通过气路安装质量流量控制器的方法对液路流量进行控制。

• The effects of two patterns of squeeze casting on mechanical properties of ZA43 alloy were investigated through the analysis of alloy liquid flow and pressure loss.

  从合金液的流动和压力损失的角度，研究了两种挤压铸造方式对ZA43合金力学性能的影响。

• And it also makes use of the microscope simulation ability of FLUENT software on liquid flow and conduct heat.

  利用FLUENT软件的流体流动和传热问题的微观模拟功能，找到换热器内部的温度分布。

• The liquid flow pattern, or velocity distribution, is an important factor in column tray design.

  塔板上气液两相的流动状况尤其是液相的流速分布对塔板效率有重要影响。

• Accurately deriving the true liquid flow velocity is the key for determining the stratification flow rate of oil and water and logging interpretation of liquid producing profile.

  準确求取流体的真实流动速度是确定油水各相分层流量及产液剖面测井解释的关键。

• On the basis of discussion on liquid flow and distribution regular pattern in rotating packing layer, calculating methods of four parts horsepower are found.

  在讨论旋转填料层内液体流动及分布规律的基础上，建立起四部分功率的计算方法。

• The pump heads are made of PPS, and condensate-repellant surfaces optimized liquid flow paths and fast drying.

  泵头由PPS制造，冷凝物防护表面使液体流量和快速干燥达到最佳。

• The comparison of the results of the calculations and the experiments indicates that the model can reflect the true liquid flow on CTST well.

  通过与实验结果的对比，结果表明该模型较好地反映了CTST塔板上液体流动的真实情况。