片语

liquid-metal brush液态金属电刷

liquid d metal fuel液态金属燃料

liquid-metal fuel液态金属燃料

liquid-metal machine液态金属式电机

liquid-metal contact液态金属接触

liquid-metal estration液体金属萃取

liquid d metal cooling液态金属冷却

liquid d metal pump液态金属泵

英汉例句

• among the numerous special effects available for the polymer industry, transparent effects such as pearlescent (or nacreous), iridescent, sparkle or liquid metal effects are broadly used.

  在聚合物工业上使用的无数的特效颜料中，透明效果颜料，如珠光、彩虹色、闪烁、液态金属等效果颜料使用最为广泛。

• liquid metal can be formed directly by injecting gas or gas-releasing blowing agent.

  液态金属的发泡可以通过直接吹气法发泡法、金属氢化物分解发泡法来实现；

• the bottom gas injection in the converter bas great effects on liquid metal stirring and can quicken the reactions.

  转炉中底吹气体产生的搅拌作用很大，能加速精炼反应的进行。

• after pouring the liquid metal into the casting mould, two processes apear immediately:the temperature of the liquid metal comes down constantly, and that of the casting mould rises.

  前言： 研究了液态金属注入铸型以后，液态金属温度下降和铸型温度上升的过程。

• liquid metal. solid metals melt and become a liquid metal like mercury.

  液态金属，固态金属熔化，形成一种像水银一样的液态金属。

• in lost foam process, liquid metal crushing coating is the important cause of metal seeping defects.

  金属液压溃涂层是消失模铸造中渗金属缺陷形成的最重要原因。

• elemental mercury, or quicksilver, is a shiny, silvery liquid metal found in thermometers, thermostats, light bulbs, barometers and lcd screens.

  汞，俗称水银，一种有银色光泽的液态金属，多用于体温计、自动调温器、灯泡、气压计和lcd屏幕。

• liquid metal enters the crystallization cavity (19) through a cow horn shape water inlet (2) positioned at a dead point on the crystallization wheel (1).

  液体金属通过位于结晶腔（1）上死点处的牛角形水口（2）进入结晶腔（19）。

• the present paper describes how to properly control the chemical compositions of the liquid metal and reduce the content of inclusions in steel in the process of refining q195l steel in the converter.

  阐述了转炉冶炼q195l钢种过程中如何加强对钢液成分合理控制以及如何降低钢中夹杂物含量等实践过程。

• the results shows:(1) the major problem of choosing container materials is oxidation and erosion of liquid metal in high temperature.

  研究结果表明： （1）高温氧化起皮剥落以及金属液体浸蚀是选择容器材料遇到的主要问题。

• on the basis of fluid kinetics, a model for infiltration kinetics of liquid metal into fibre prefabricated composite has been proposed.

  从流体动力学出发导出了液态金属浸渗纤维预制件的动力学模型。

• but if the holding temperature is too high or the holding time is too long, some liquid metal is exuded from the surface of samples, and the samples are deformed by their own gravity.

  保温温度太高或保温时间太长时，试样表面有液相析出，靠近表面部位产生大量孔洞，试样在自重作用下变形。

• the filling process of liquid metal is the most important phase during a casting forming.

  液态金属的充型过程是铸件形成的最重要的阶段。

• the experiment results show that special constituent fluctuation in certain direction and with enough strength in liquid metal can promote nucleation in liquid metal and increase…

  研究结果表明，在钢液中造成一定方向和程度的成分起伏，可以促进钢液生核，从而增加铸坯中等轴晶数量。

• the forces acted on melting pool during plasma arc welding process are analyzed. the violent movement of liquid metal is as the result of joint forces acted on the pool.

  通过对等离子弧焊接时熔池的受力情况分析，阐明了液体金属剧烈运动是由于多种力共同作用的结果。

• a liquid metal magnet hydrodynamics wave energy generator (lmmhd-weg) can be used to convert wave energy to electric energy.

  液态金属磁流体波浪能发电机（lmmhd-weg）可以直接将波浪能转换为电能，该发电装置比常规旋转发电结构简单。

• the liquid metal engulfed the room, bursting through the door and windows and burying the workers.

  随后，兇猛的钢水从屋子的门和窗户涌入房间将里面的工人给吞噬了。

• analyse principle of operation, technology feature of single-phase alternating current induced liquid metal electromagnetic pump wave soldering machine.

  重点分析单相交流感应式液态金属电磁泵波峰焊接设备技术的工作原理、技术特征；