英汉例句

• Analysis shows that strain softening of the material causes progressive failure and affects the load carrying capacity of the structures.

  分析结果表明，由于巖土类材料的应变软化性质，结构呈现渐进破坏，且承载特性与材料的软化程度有关。

• So for practical purpose, the ferrofluid lubrication is used to control load carrying capacity by applied magnetic field, but not to obtain high load carrying capacity.

  所以，从实用的观点来看，铁磁流体润滑是为了利用外磁场来调节轴承的承载性能，而不是为了获得高承载力。

• Based on the latest experimental study, the load carrying capacity of the thin-walled steel I-girders subjected to eccentric patch loading has been analyzed.

  引用国外最新的试验研究，对薄壁工字形钢梁在小片荷载偏心作用下的承载力问题进行了研究。

• This paper has investigated air hydrostatic bearings with high load carrying capacity and given experimental and calculating results.

  本文对具有高承载能力的空气静压轴颈轴承进行了研究，给出了实验和计算结果。

• In the experiment the strain of concrete, steel bar, steel mesh, composite mortar and the ultimate load carrying capacity are tested.

  试验中测量了轴压试件的极限荷载、混凝土应变、钢筋应变、钢筋网应变以及复合砂浆应变。

• It is necessary to make the ferrofluid seal separate from lubricating film in order to avoid restrictions on the load carrying capacity of journal bearing.

  为了避免轴承承载能力受到限制，需要将铁磁流体密封与润滑膜分离开来。

• Grease specially developed for chain saw machines used in extraction of marble and stone blocks in quarries. High load carrying capacity and water resistance.

  专业为大理石提取和石块开采之矿场研制的链锯专用润滑脂。具有很高的承载和抗水沖洗特性。

• More attention is now paid to analysis and assessment of load carrying capacity of the existing highway Bridges in engineering circles.

  现有公路桥梁承载力的分析与评定是当前工程界非常重视的问题。

• Theory calculated value was compared with test data, and load carrying capacity of the bridge can be made sure.

  将理论计算值与试验数据进行比较，进而确定该桥的承载能力。

• These bearings are featured by the extremely big axial load carrying capacity and mean while they can also carry cetrain radial load .

  轴向载荷能力非常大，在承受轴向载荷的同时还可以彻骨你受干径向载荷。

• The bearings are designed for very high load carrying capacity and, because they are designed with the optimum number of large barrel rollers, are also suitable for heavy loads.

  轴承的设计非常高的承载能力，而且由于他们的设计的最佳一些大型每桶辊，也适用于重物。

• The negative plastic hinge line in the plate was evaluated by using variational approach, then an equation for calculating the ultimate load carrying capacity was developed.

  首先利用变分原理确定板的负塑性铰线方程，继而推导出极限承载力的表达式。

• Due to the independence of the concrete filled steel tubular column and the ring beam at the connection, failure of the joint would not influence the load carrying capacity of column.

  环梁节点的钢管混凝土柱与环梁相对独立，节点的破坏基本上不影响钢管混凝土柱的承载力。

• The result indicates that CMMR can increase the working performance and ultimate load carrying capacity of axial compressed RC members greatly.

  试验结果表明CMMR可以明显地提高混凝土轴压构件的工作性能以及极限承载力。

• The in-plain ultimate load carrying capacity of concrete filled steel tubular(CFST) laced columns compressed eccentrically is calculated based on design guidelines for CFST structure.

  应用钢管混凝土结构设计规程，对钢管混凝土格构柱偏心受压试件进行面内整体承载力计算。

• This paper has investigated air hydrostatic bearings with high load carrying capacity and given experimental and calculating results. Traditional method is modified in design and calculation.

  本文对具有高承载能力的空气静压轴颈轴承进行了研究，给出了实验和计算结果。在设计计算上，对传统的计算方法做了修正。

• It's introduced some situation about H type steel pile driven into batholite, ultimate load carrying capacity and deviation of pile top while using long distance follower pile under water.

  介绍H型钢桩在巖基中的打入情况、极限承载力、长距离水下送桩桩顶偏位等问题。

• It is concluded that different welding modes did not change the load carrying capacity of the tubular joints remarkably, but made their failure modes different.

  研究结果显示不同的焊接方式没有引起节点承载力的显着差别，但引起节点破坏模式的不同。

• On the Basis of an abundance of field survey data of pavement condition, the evaluation of structural load carrying capacity and deterioration extent for old cement concrete pavement are studied.

  依据广东省若干典型水泥混凝土路面路况调查数据 ，进行路面结构承载能力评价及损坏状况评价研究 ，提出路面损坏状况评定参考标準。

• Their suitability for high speeds, robust design and high load carrying capacity increase cutting performance and system availability with excellent accuracy and minimum maintenance requirements.

  他们是否适合高速，坚固的设计和高承载能力提高切削性能和优良的準确性和最低维修要求系统的可用性。