片语

low sb alloy低锑型板栅合金

low melting alloy易熔合金

dilute alloy低合金

low carbon alloy steels低碳合金钢

low antimony alloy低锑合金

low co alloy低co合金

low permeability alloy低磁导率合金

invar low expansion alloy因瓦低膨胀系数镍铁合金

low carbon alloy低碳合金

low tensile alloy低强度合金

英汉例句

• Atmospheric corrosion of carbon steel and low alloy steel in polluted environment.

  碳钢和低合金钢在污染环境下的大气腐蚀规律。

• When low alloy steel replaced carbon steel castings, a series of questions were uncovered in traditional sand casting process.

  铸钢材质升级为低合金钢后，传统的砂型铸造工艺在生产中暴露出了一系列问题。

• Comparison with EAF dust at carbon and low alloy steel works, the EAF dust at stainless steel works contains more alloy elements but zinc content is lower.

  与普碳钢或低合金钢厂电弧炉烟尘比较，不锈钢电弧炉烟尘含有更多的合金元素，但锌含量较低。

• Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.

  可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。

• The Mo alloy inlaid piercing plug is especially suitable for piercing of low alloy pipes and high pressure boiler pipes.

  镶嵌式钼合金穿孔顶头尤其适用于低合金钢及合金高压锅炉管的穿孔。

• Due to the different deoxidation methods, the ordinary low alloy steel has excellent performance, which requires that the material must be able to withstand the reciprocating force.

  在冶炼时由于脱氧方法的不同，由于普通低台金钢具有优良的性能，这就要求材料必须经受得住往复力的作用。

• The results show that producing HRB400 reinforced bar can substitute low alloy for conventional V microalloy process by composition adjusting and rational cooling control after rolling.

  结果表明，通过成分调整和合理的轧后控冷，能够用低合金替代传统的V微合金化工艺进行HRB400螺纹钢筋的生产。

• The results show that by using spray and strong breeze quenching, heavy-calibre wear-resisting bend pipe made of low alloy steel may easily arrive a good quenching effect.

  结果表明，大口径低合金钢耐磨弯管采用雾风冷却可以方便地得到满意的淬火冷却效果。

• The effects of heat treatment on the properties of multi-element low alloy wear-resistant steel making the liner of rolling mill liner are investigated.

  研究了热处理工艺参数对用于制造轧机衬板工作层的多元低合金耐磨铸钢力学性能的影响。

• The working ideas of developing high quality products of low alloy and microalloy steels are summarized in detail.

  详细总结了发展低合金、微合金钢高级产品的工作思路，为鞍钢的生产经营提供指导思想。

• The precipitation behaviors of titanium in high strength low alloy steel(HSLA steel) were summarized including the type, morphology, size and precipitation kinetics of the precipitates.

  总结了钛在低合金高强钢中的析出行为，包括析出物的种类、形态、尺寸及析出动力学；

• Welding hydrogen induced crack (HIC) is a kind of hydrogen damage of metal during welding of high strength low alloy steel.

  焊接氢致裂纹是金属氢损伤在焊接中的一种表征。

• The recent advances of research of wear resistant steel including austenitic manganese steel, low alloy martensitic steel and bainitic steel are summarized in this paper.

  综述了抗磨钢包括奥氏体锰钢、低合金马氏体钢和贝氏体钢的最新研究进展。

• This article focuses on the welding technology of the carbon steel, low alloy steel, stainless steel, cast iron and other metal materials.

  本文主要阐述了碳钢、低合金结构钢、不锈钢、铸铁等金属材料的焊接技术。

• In the long term of production of the low alloy heat-resistant bolting steel, the out-of-tolerance of hardness is the one of the primary causes that leads to the rework of heat treatment.

  在长期的生产中，低合金耐热螺栓钢硬度超差是造成该材料热处理返修的主要原因之一。

• Preheating shall be carried out for carbon and low alloy steel welding where required. Preheating temperature shall be kept uniform from the start to the end of welding.

  在进行碳钢及低合金钢的焊接时应进行预热。预热温度在焊接开始到结束期间应保持均衡。

• The characteristics of the weld between copper tubes and low alloy tubes were analysed, and reasonable weld technology methods were found out through some experimental investigations.

  对紫铜管与低合金钢管的焊接特点进行了分析，通过工艺试验研究，找出了较合理的焊接工艺方法。

• High strength plate also known as high strength plate, low alloy high strength plate, high strength welding plate. It is characterized by high strength and high yield point.

  高强板又称高强度板，低合金高强板，高强度焊接板。主要特点是强度大，屈服点高。

• Materials for the carbon steel and low alloy wire, so that the coating has high wear resistance, and lower prices.

  材料为碳钢及低合金丝材，使涂层有较高的耐磨性，且价格较低。

• Used for welding steel structure and low alloy steel with low strength rank, like 09mn2 etc.

  用于焊接重要的碳钢结构和强度等级较低的低合金钢，如09Mn2等。

• Corrosion behavior of low alloy cast irons in seawater is similar to that of ordinary cast irons.

  低合金铸铁在海水中的腐蚀行为与普通铸铁相似。

• The effect of silicon and isothermal quenching process on the microstructure and mechanical property of the high-carbon low alloy martensite-Bainite steel was studied.

  研究了硅和等温淬火工艺对高碳低合金马氏体-贝氏体钢金相组织与机械性能的影响。

• Aimming at this situation, it introduces applying hammers of alloy steel with high carbon and manganese content and low alloy steel and composite hammers.

  针对这一情况，提出了采用高碳锰合金钢锤头、低合金钢锤头及复合锤头。

• Especially suitable for furniture, steel, vehicles, hardware. other industry to welding the low carbon steel, low alloy steel, stainless steel and other metal material.

  特别适合于家具、钢结构、车辆、五金等行业中焊接低碳钢、低合金钢、不锈钢等金属材料。

• By using solidification and melted slag theory, series mold powders of low alloy steel, plain carbon steel and high carbon steel, were developed and used in production successfully.

  运用凝固理论和熔渣理论，研制开发了适用于低合金钢、普碳钢、高碳钢的系列保护渣并成功地应用于连铸生产。

• For welding the extra thick plate of low alloy high strength steel, due to the influence of welding stress, it relatively difficulty for controlling the defect and deformation.

  低合金高强钢特厚板的焊接，由于焊接应力的影响，在控制缺陷和变形方面都比较困难。