片语

low- carbon steel[材] 低碳钢

deformed low-carbon steel形变低碳钢

Low Temperature Carbon Steel低温碳钢

Low temp carbon steel碳温碳钢

thomas low-carbon steel堿性转炉低碳钢

ordinary low-carbon steel普通低碳钢

Quenched Low-Carbon Steel淬火低碳钢

英汉例句

• The texture evolution of ferrite during warm compression of Q235 low carbon steel was determined quantitatively by means of orientation mapping based on the EBSD technique.

  利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。

• When propane gas cutting low carbon steel plate, the cost varies with the thickness of the steel plate.

  用于低碳钢板气割时，气割成本随板厚不同而变化。

• The results showed that a uniform, adherent and non dilution clad coating on low carbon steel was obtained under the proper cladding parameters.

  研究结果表明，在一定的工艺参数下，铁基自熔性合金粉末可以在钢的表面形成一层铺展均匀、结合牢固、具有零稀释率特点的熔覆层。

• The characteristics of the microstructure on super low carbon steel powder has been studied, and the crystallization performance of slag analysed by phase diagram.

  研究了超低碳钢保护渣的显微组织结构特征，并根据相图分析了熔渣的结晶性能。

• Research and development of mould powder for low carbon steel thin slab casting specially used in cold rolling at TISCO is introduced.

  介绍了唐钢薄板坯连铸低碳冷轧用钢保护渣的研究开发过程。

• The deformation characters and the evolution of deformation induced transformation ferrite of low carbon steel were studied.

  研究了不同温度下低碳钢变形特征以及形变诱导铁素体演变行为和在保温过程中的变化。

• Material: Be woven or welded with low carbon steel wire and al-mg wire.

  材质：选用低碳钢丝、铝镁合金丝编织焊接而成。

• High speed rail material: low carbon steel wire high speed rail production process: weaving and welding.

  高速护栏材质：低碳钢丝高速护栏制作工艺：编织焊接而成。

• The influence of feeding rare earth metal wires in mould on mould flux properties for high carbon steel and low carbon steel of Baogang was studied in laboratory and on site as well.

  通过实验室和现场试用两方面对结晶器喂稀土丝后稀土对包钢方坯连铸现用高碳钢、低碳钢保护渣使用性能影响进行了研究。

• Structure: weaved and welded, using low carbon steel wires, fixed by the linking accessories and steel pipe.

  结构：用冷拔低碳钢丝焊接成的隔离网，用连接附件与钢管支柱固定。

• A new alloy overlay was prepared by spraying-welding technique on low carbon steel surface.

  采用喷焊技术在低碳钢表面获得合金熔覆层。

• Soluble zinc and insoluble low carbon steel anodes are used for alkaline zinc-cobalt plating.

  堿性锌钴合金电镀常采用锌阳极和低碳钢阳极。

• By adopting a compound casting method, we have developed a kind of high wear resisting crushing bar, with low carbon steel interior, high chromium casting steel exterior.

  采用复合铸造法研制了一种芯部为低碳钢、外部为高铬铸钢的高耐磨碾齿，此碾齿用于玻璃厂破碎物料的粉碎机上，取得了良好的效。

• In this paper, the residual welding stresses in a low carbon steel girth butt welded pipe are calculated with a nonlinear finite element code ADINA.

  本文利用ADINA非线性分析有限元程序，对低碳钢管道环焊缝接头焊接残余应力进行计算。

• In this paper, typical surface defects of low carbon steel high speed wires for cold-heading have been examined by using SEM and EDS.

  采用扫描电镜和能谱仪对低碳冷镦用高速线材表面缺陷进行了分析，同时对轧制中间料的缺陷和成品冷镦标準件开裂样品进行对照分析。

• In this paper, it was studied to improve the fatigue strength of welded joints and structrures of low carbon steel Q235B by peening the welded toes with ultrasonic equipment.

  文中利用自行研制的超声波沖击实验装置，对提高低碳钢焊接接头疲劳强度进行了研究。

• The series of welding wires are mainly suitable for welding important low carbon steel and low alloyed steel structure.

  该系列焊丝主要适用于焊接重要的低碳钢和低合金钢构。

• Galfan wire, galvanized low carbon steel wire is 5% aluminum alloy, the alloy composition mixed trace rare earth zinc alloy layer.

  高尔凡钢丝，低碳钢丝的镀锌层是合金，合金成分5%铝-混合微量稀土合金锌层。

• If there aren't cast-iron electrode, the cast-iron electrode can be made by ordinary low carbon steel electrode, and repair the damaged stock with arc cold welding.

  在没有铸铁焊条的情况下，采用普通低碳钢焊条制作铸铁焊条，用电弧冷焊技巧修复损坏的铸铁件。