片语

thickness of lubricant film以及润滑油膜厚度等

strength of lubricant film润滑膜强度

lubricant film failure润滑失效

lubricant oil film damping油膜阻尼

lubricating film润滑膜，润滑油膜

lubricant thin film润滑薄膜

Dynamic Lubricant Film动态油膜

graphite lubricant film石墨润滑膜

lubricant film broke弹势振动

lubricant film pressure distribution润滑膜压力分布

英汉例句

• their surface finish maximizes lubricant film formation and optimizes rolling motion of the rollers.

  其表面光洁度最大限度地促进润滑剂油膜的形成，并使滚子的滚动最优化。

• make the thickness of solid particles of solid particle size is less than 0.6 times the destruction of lubricant film failure, so that the machine significantly increased friction and wear.

  固体粒子会使厚度小于固体粒子尺寸0.6倍的润滑油膜破坏而失效，从而使机器的摩擦力和磨损明显增大。

• also because the lubricant film has the homogenization, may increase to feed precision, may achieve a nanometer level in the long traveling schedule the localization resolution.

  又由于油膜具有均化作用，可以提高进给精度，在较长的行程上可以达到纳米级的定位分辨率。

• by using this diagram the distribution of lubricant film thickness in the gear engagement is investigated thus providing the basis for the optimized design of gears with satisfactory film lubrication.

  应用该图探讨了齿轮传动在啮合区的油膜厚度分布规律，为齿轮的优化设计具有良好的润滑油膜提示了途径。

• influence of primary parameters on the minimal thickness of lubricant film is analyzed on the basis of result derived form computer calculation.

  依据计算结果，分析主要参数对最小油膜厚度影响和变化规律。

• lubricant temperature variation across the film thickness and heat transfer of upper and down surface of lubricant film is taken into account in lubrication calculation of thrust bearings.

  在进行水电机组推力轴承的润滑计算时，考虑了油膜温度沿厚度方向的变化，以及油膜上、下表面的热传递；

• then, the structure should reduce contact stress of the pair, and could form lubricant film between t…

  其次在结构方面应尽量降低摩擦副的接触比压、并强迫形成润滑膜；

• it can also cause a lot of problems such as additive wasting, oil oxidation, corrosion, lubricant film thickness reduction and animalcule growth.

  润滑油的水污染可以引起诸多问题，诸如：添加剂损耗、润滑油氧化、腐蚀、润滑剂薄膜厚度减小以及微生物滋生等。

• the distribution of lubricant film thickness and stress during the cold extrusion was unveiled from the calculated result.

  计算结果揭示了冷挤压过程中，润滑油膜厚度及油膜压力的分布。