optimum control
[数] 最优控制;[自] 最佳控制
2026-04-13 22:11 浏览次数 16
[数] 最优控制;[自] 最佳控制
optimum impulse control最优控制策略
optimum adaptive control优化适应控制
optimal control[数] 最优控制
optimum and control优化控制
running optimum power control运行最优功率控制
optimum time control时间最优控制
optimum combustion control最佳燃烧控制
Optimum Power Control最佳功率控制
optimum m control最优控制
Optimum total control technology经济性
To reduce energy consumption of oilfield water flooding system, the optimum control of energy saving of the water flooding system need to be carried out.
为有效地减小油田注水系统无用功能耗,需对注水系统实行节能优化控制。
The optimum control project and calculating method of the gas collector pressure in coke oven were introduced.
介绍了焦炉集气管压力的优化控制方案及控制算法。
The GA-BP learning algorithm of neural network, the GA learning algorithm, the rule of optimum control including their features were introduced.
给出了作为模型预估器的神经网络GA—BP算法流程及GA算法实现,提出了最优控制指标选择原则及控制指标表达式。
Besides, with the calculator the Riccati algebraic equation was solved to obtain the optimum control system.
并使用计算机来求解代数黎卡堤方程,以实现系统的最优控制系统。
It researches the ship lateral movement multivariant stochastic control law on the basis of multivariant stochastic optimum control theory.
本文基于多变量随机最优控制理论研究船舶横向运动多变量随机控制规律。
The predicative optimum control of the temperature of a cold storage has a wide application in agricultural engineering especially in fruit and vegetable cold storage.
冷库温度预测优化控制在果蔬冷藏方面的应用尚有许多不足之处。
The serial multistep model considering production cost was also investigated by using optimum control technique of dynamic economics.
采用动态经济学的最优控制技术对不可再生能源的考虑生产成本的连续多期模型进行了分析。
By using electronic expansion valve, combining with novel control methods, optimum control of refrigeration system and high energy-saving effects can be realized.
配合新型控制方式,可以实现制冷系统的优化控制和大幅度地提高节能效果。
The controller of the DC motor speed adjusting system is developed, which is based on ITAE optimum control theory combined with PI control.
提出了一种用于直流电机调速系统的控制器设计方法,该方法主要基于ITAE最优控制理论,并结合PI控制。
Realizing furnace optimum control is based on combustion control, and that combustion control key is air fuel ratio control.
燃烧控制是实现窑炉优化控制的基础,而燃烧控制的核心是空燃比控制。
Because these uncertainties existence, in fact, optimum control which obtained according to the ideal model not only can「t guarantee optimum, but also cause the control quality to descend seriously.
由于这些不确定性的存在,按照理想模型得到的最优控制在实际上不仅不能保证最优,而且会引起控制品质的严重下降。
The RTS servo amplifiers provide optimum control of AXEM motors in speed loop.
垃圾转运站伺服放大器可提供最佳的马达速度闭环控制AXEM。
The power of electronic stove is chosen according began and end temperature, volume of the heated object, for which the paper established the optimum control model of dynamic heating.
根据被加热对象的体积、热容量、起止温度等确定电热器的功率,由此构建了最佳动态加热控制模式。
With a lot of tests and simulation analyses from the weight matrix selection of quadratic optimum control design, the principles of selecting weight matrix are summed up.
本文在线性二次最优控制设计中关于权矩阵的选取问题作了大量的试验与仿真分析,得到了关于权矩阵选取的一些基本规律。
We also give the approximate algorithm of dispersed optimum control model, and compute the numerical value of our country」s h-l water injection developing oilfield as an example.
同时还给出了离散最优控制的近似算法,并以国内H—L注水开发油田为实例进行了试算。
Based on analysis of main process parameters such as upsetting velocities, heating current, upsetting pressures etc., the optimum control system of process parameters is determined.
在对镦粗速度、加热电流、镦粗压力等主要工艺参数分析的基础上,建立了工艺过程的优化控制系统。
And the vibration power flow transmission optimum control effect is simulated, using the Linear quadratic Regular (LQR) theory.
利用线性二次调节器理论,对耦合系统的振动功率流传递进行了最优控制。
The inverse dynamic method of manipulator and the Linear Quadrics (LQ) optimum control method are employed to investigate the problems of trajectory tracking and eliminating the remaining vibration.
利用机械臂逆动力学方法和线性二次型(LQ)最优控制方法讨论刚柔性耦合机械臂的轨迹跟蹤控制问题和消除残余振动的控制问题。
This paper discusses a new control tactics of the converter which adopt voltage vector optimum control tactics by predicting the current of high power factor converter.
通过对高功率因数变流器网侧指令和实际电流的预测,提出了一种采用变流器电压矢量优化控制策略的电流跟蹤新方案。
So maneuver reentry trajectory design problem was transferred into the more complex optimum control problem with terminal constraints and inner state constraints.
这就增加了内点约束,从而使机动再入弹道设计问题成为具有内点约束和终端约束更复杂的最优控制问题。
The interval of the time lag is identical of each lane controlled and when the input is a random sign, we can adopt quadratic function of optimum control and separation theorem.
当受控对象各控制通路中滞后时间间隔都相同,且输入为随机信号时,可采用二次函数型最优控制定律和分离定理。