英语释义

1. a more or less solid mass of ore that may consist of low-grade as well as high-grade ore and that is of different character from the adjoining rock

片语

ringing orebody圈定矿体

branched orebody分叉矿体

3D orebody三维矿体

old orebody金矿体

ore block矿块；矿段；矿体

industrial orebody工业矿体

orebody location矿体定位

orebody outlining指标圈定矿体

main orebody主矿体

injection orebody贯入矿体

英汉例句

• It is more important in mining a low-grade complex orebody due to its special geological conditions.

  低品位复杂矿体由于其特殊的地质情况，采场管理工作显得尤其重要。

• The boundary configuration and internal model of orebody can be established accurately by using line-frame method with block-section method.

  线框构模法与块段法相互结合可用于精确表达矿体的边界形态及内部属性。

• The main control condition is quartz diorite-porphyrite with the shape of small rock stub(subvolcanic rocks), among the parasitic rubblerack tube and the off-lying crack, the gold orebody occurs.

  主要控矿条件为小巖株状石英闪长玢巖（次火山巖），其中寄生的隐爆角砾巖筒及外围裂隙中赋存着金矿体；

• It is the key to probe into and select the effective way and method for correct orebody location forecasting.

  针对不同类型的矿床，探讨、选择合理的有效途径与方法是进行正确的矿体定位预测的关键所在。

• Concept of grade equivalent, major working methodology and factors impacting secondary orebody outlining by grade equivalent are described.

  主要阐述了当量品位的概念、主要工作方法及影响当量品位法二次圈定矿体的各方面因素。

• There are high and uneven stresses in the orebody of Dongguashan Mine due to its deep occurrence.

  冬瓜山矿的矿体埋深大，因而存在高应力，并且各向应力不均衡。

• In accordance with the orebody shapes of Dongdashan iron mine and the adopted mining method, the ways of design and optimization for medium and deep caving parameters were given.

  依据东大山铁矿的矿体形态及所采用的采矿方法，浅析了中深孔崩矿参数的设计与优化途径。

• Kriging is one of the three dimensional interpolation methods and is now widely used in orebody reserve calculation.

  克立格法是三维空间插值的主要方法之一，目前已广泛应用于矿体储量计算过程中。

• Tonkuangyu Copper mine sets up a set of simple and convenient monitoring system of orebody caving state in the mine stope to use block caving method.

  铜矿峪铜矿在自然崩落法采场中，建立了一整套简便易行的矿体崩落状态监测系统。

• Whether the sill-free sublevel caving mining method is suitable to break and broken orebody has been being discussed for a long time.

  无底柱分段崩落采矿法是否适用于松软破碎矿体，一直是采矿界争论的焦点。

• It is concluded that location of foot-wall drawing points are closely related to orebody dip, cut-off grade and ore grade of wall rock.

  认为下盘放矿点位置与矿体倾角、放矿截止品位、围巖含矿品位有着密切的关系。

• Gold in strati form major orebody is mainly included in bornite and tetrahedrite as fine grain of native gold.

  层状主矿体中金主要以细小的自然金形式包裹于斑铜矿和黝铜矿中。

• The necessity of the development of deep orebody is studied and the feasible plan is put forward in this paper.

  对新房金矿深部矿体开拓的必要性进行了探讨，提出了深部开拓的可行性方案。

• The orebody occurred below Quaternary, mineralization is closely related to tectonic activity and alteration.

  矿体赋存于第四系之下，矿化与构造活动及蚀变密切相关。

• Meanwhile a basis on prognosis of ore deposit is also proposed by using the method that the orebody is divided to oxidized zone, mixed zone and primary zone at the Huanggoushan gold deposit.

  在荒沟山金矿研究中，利用这种方法将矿体划分为氧化带、混合带和原生带，为矿床预测提供了依据。

• The method of primary halo is an effective way of forecasting deep seated orebody location in the mines with critical reserves.

  危机矿山深部矿体定位预测中，利用原生晕地球化学方法是一种合理的、有效的途径。

• To overcome the difficulty of unstability of orebody and surrounding rock, the test of flat-back cut-and-fill drift mining is carried out.

  针对凡口铅锌矿狮岭顶板矿体和围巖极不稳固的牲，进行了机械化上向进路分层充填采矿工艺的试验研究。

• This paper described briefly the stoping work of remnant orebody in accumulative manganese deposits.

  本文简介了堆积型锰矿床残矿体的回采工作。

• Strongly altered mylonite is gold orebody and gold mineralized body.

  强蚀变糜棱巖即为金矿体及金矿化体。

• The Bayi manganese Mine has accumulated some experience in remnant orebody stoping by taking a series of practical and effective measures according to its actual production conditions.

  八一锰矿针对矿山生产实际，采取切实可行的技术措施，在回采残留矿体方面积累了一些生产实践经验。

• The main orebody of Huashupo Copper Deposit in Tongling occurs in silica horizon of Qixia Group of Lower Permian System, while minor ores controlled by strata occur in Gufeng Group.

  铜陵花树坡铜矿床主矿体赋存于二叠系下统栖霞组硅质层内，次要矿体赋存于孤峰组内，受层位控制。

• Abstr: The industrial indicators can be revised with the changing of factors such as orebody occurrence characteristics, mining, mineral processing and smelting, price, etc.

  文章摘要：矿床的工业指标随矿体赋存特征、开采、选冶、售价等因素的变化而变化。

• Surface model and internal model of orebody were established by line-frame and block-section method, respectively.

  基于线框法及块段法分别构建矿体的表面模型及内部模型。